TP-Link Omada SM5110-SR 10GBase-SR SFP+ LC Transceiver is a high-speed multi-mode fiber module designed for short-range 10 Gigabit Ethernet connections in enterprise and data center networks. It delivers fast and stable optical communication between compatible SFP+ devices such as switches, routers, and servers. The TP-Link Omada SM5110-SR supports the 10GBase-SR standard with a data rate of 10 Gbps. Therefore, it provides reliable high-speed fiber transmission for backbone and aggregation links. In addition, it operates over multi-mode fiber using an 850 nm wavelength and supports distances up to 300 meters on OM3 fiber. Moreover, the TP-Link Omada SM5110-SR uses an LC duplex connector and follows the SFP+ Multi-Source Agreement (MSA). As a result, it ensures compatibility with Omada switches and other supported 10G SFP+ networking equipment. In addition, it supports full-duplex communication for stable data transfer. The TP-Link Omada SM5110-SR is hot-swappable. Therefore, you can install or replace it without shutting down the network. In addition, it supports Digital Diagnostic Monitoring (DDM), which helps track performance and operating conditions in real time. Furthermore, it is designed for short-distance fiber links such as within racks, floors, or nearby rooms. It helps reduce latency while maintaining high bandwidth performance in dense network environments. Finally, the TP-Link Omada SM5110-SR delivers reliable 10G multi-mode fiber connectivity, simple deployment, and stable performance for professional networking setups. Specifications: Speed: 10 Gbps 10GBase-SR fiber transceiver Fiber: Multi-mode LC duplex connector (850 nm wavelength) Distance: Supports up to 300 meters on OM3 fiber Features: Hot-swappable with Digital Diagnostic Monitoring (DDM) Compatibility: SFP+ MSA compliant for Omada and enterprise switches
Gigabit Ethernet,1x Combo port SFP or Gigabit Ethernet 1xSFP The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput. This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
The TP‑Link JetStream 52‑Port Gigabit L2+ Managed Switch with 48‑Port PoE+ provides robust networking for business and enterprise environments. It supports 48 PoE+ Gigabit ports with a total 384 W power budget, allowing simultaneous power and data transmission to devices such as IP cameras, phones, and access points. Therefore, it simplifies cable management and device deployment in large networks. Furthermore, the switch includes four Gigabit SFP slots for high‑speed fiber uplinks and reliable connectivity. Managed L2+ and L3 features help optimize traffic with static routing, link aggregation, and advanced QoS controls. In addition, strong security strategies such as ACLs and storm control help protect network resources. Moreover, centralized cloud management is supported through the Omada SDN platform, allowing you to control and monitor multiple devices from a single interface. The switch also supports standalone management via web GUI, CLI, SNMP, and RMON for flexible administration. As a result, JetStream TL‑SG3452P enhances network efficiency and scalability for offices, campuses, and enterprise networks. Specifications: 48 PoE+ Gigabit RJ45 ports with 384 W total PoE budget Four Gigabit SFP uplink slots for fiber connectivity L2+ and L3 switching with static routing and advanced QoS Centralized Omada cloud management and flexible administration options Robust security strategies including ACL, storm control, and authentication
The ASUS ExpertWiFi EBP15 is a 5-port Gigabit smart managed PoE+ switch designed for small businesses and professional networks. It provides reliable wired connectivity while supplying power to compatible PoE devices such as access points, IP cameras, and VoIP phones. Therefore, it helps simplify network deployment and reduce cable clutter. The switch features five Gigabit Ethernet ports, including four IEEE 802.3af/at PoE+ ports. It delivers up to 30W per port with a total PoE power budget of 60W. In addition, auto-negotiation and Auto MDI/MDIX simplify installation and support a wide range of network devices. The ExpertWiFi EBP15 includes smart management features such as VLAN, QoS, IGMP Snooping, loop detection, port mirroring, and PoE priority settings. Moreover, it supports centralized management through compatible ASUS ExpertWiFi products, making network administration easier. The compact metal design fits easily on a desk or shelf. In addition, the switch delivers a 10Gbps switching capacity, supports jumbo frames up to 15KB, and stores up to 8K MAC addresses for reliable data handling. Therefore, it is well suited for business environments that require stable and efficient wired networking. Specifications: Ports: 5 × Gigabit RJ45 Ethernet ports PoE: 4 × IEEE 802.3af/at PoE+ ports with 60W total budget Switching capacity: 10Gbps with 7.44Mpps forwarding rate Management: VLAN, QoS, IGMP Snooping, Port Mirroring, Loop Detection Performance: 8K MAC address table and 15KB jumbo frame support
The Logitech C920e Business Webcam is designed for professional video meetings and hybrid work environments. It delivers Full HD 1080p video at 30 frames per second, providing clear and sharp image quality for online communication. Additionally, it features a fixed 78° field of view that frames users naturally during video calls. This Logitech C920e Business Webcam includes dual built-in omnidirectional microphones that capture voice clearly from up to 1 meter away. Moreover, it uses autofocus and automatic light correction to maintain clear image quality in different lighting conditions. The Logitech C920e Business Webcam connects via USB-A for simple plug-and-play use without additional setup. In addition, it includes a privacy shutter that covers the lens when the camera is not in use for added control and security. It is compatible with major video conferencing platforms and is widely used in business and remote work setups. Therefore, it is suitable for professional meetings, online collaboration, and office communication. Specifications: Full HD 1080p video at 30 fps for clear meetings Fixed 78° field of view for natural framing Dual omnidirectional microphones for clear voice capture Autofocus with automatic light correction USB-A plug-and-play with built-in privacy shutter
The Cougar Revenger S Wired Gaming Mouse | CGR-WOMB-RES is a performance-focused gaming mouse designed for FPS accuracy and fast response. It uses a PixArt PMW3360 optical sensor that delivers up to 12,000 DPI for precise tracking. Additionally, it supports a 2000Hz polling rate that improves input speed and reduces delay during gameplay. The mouse includes six programmable buttons for customizable controls. Moreover, it features an ergonomic right-handed design with anti-slip side grips for better control. It also includes RGB lighting and onboard memory for saving profiles. Therefore, the Cougar Revenger S Wired Gaming Mouse delivers precision, speed, and reliable performance for competitive gaming. Specifications: PixArt PMW3360 optical sensor up to 12000 DPI 2000Hz polling rate for ultra-fast response Six programmable buttons for custom controls Ergonomic right-handed design with grip stability RGB lighting with onboard memory profiles
ASRock B860 Pro RS WiFi DDR5 LGA1851 90-MXBRK0-A0UAYZ is a micro-ATX motherboard designed for Intel LGA1851 processors. It is built for stable performance, modern features, and reliable daily computing. It supports DDR5 memory for higher speed and better multitasking. Therefore, it improves system performance for gaming and productivity. In addition, it works well for modern PC builds that need fast and stable operation. The motherboard includes built-in WiFi and LAN. As a result, it provides flexible internet connectivity for both wireless and wired networks. It supports PCIe slots for graphics cards and M.2 SSD storage. Meanwhile, USB ports and display outputs give strong connectivity options for upgrades and peripherals. ASRock designs this board for stability and long-term use. Therefore, it delivers consistent performance for gaming and everyday workloads. Specifications: Intel LGA1851 CPU support DDR5 high-speed memory Built-in WiFi and LAN M.2 SSD storage support Stable ASRock motherboard design
The PROLINK PIC1010WP Wireless IP Camera is designed to provide flexible indoor surveillance with wireless connectivity, remote monitoring, and smart recording features. It allows users to monitor homes, offices, and other spaces through compatible devices. The camera features a high-definition dual-lens design with pan and tilt control for wider area coverage. Additionally, the remote pan and tilt function allows users to adjust the viewing direction and monitor different areas without physically moving the camera. The PROLINK PIC1010WP supports HD video recording with resolutions up to 1280 × 800 and uses H.264 video compression for efficient video storage and streaming. Moreover, it supports separate video settings for different viewing devices. The camera includes 2.4GHz Wi-Fi connectivity and also supports wired network connection through an RJ45 Ethernet port. Furthermore, the wireless setup supports WEP and WPA/WPA2 security modes for network protection. The PROLINK PIC1010WP includes day and night monitoring with separate sensors and infrared LED support for low-light environments. In addition, the built-in microphone and speaker provide two-way audio communication. The camera supports local recording through an SD card and also works with NAS and cloud storage options. Therefore, users can store recorded footage and review important events when needed. Motion and sound detection features allow the camera to send notifications when activity is detected. Moreover, the plug-and-play setup makes installation easier for home and office users. The PROLINK PIC1010WP combines wireless monitoring, pan and tilt control, recording options, and two-way audio in a compact security solution. As a result, it provides a practical option for users who need flexible surveillance capabilities. Specifications: Resolution: Up to 1280 × 800 HD video Sensor: RGB Mega 1/4-inch CMOS sensor Connectivity: 2.4GHz Wi-Fi and RJ45 Ethernet Lens: 3.3mm fixed lens, 70° viewing angle Storage: SD card, NAS, and Dropbox recording support
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
