Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The PCE EX Online 6 KVA 5400W is a high-capacity online UPS built for strong power protection in offices and business environments. This UPS delivers clean and stable electricity even during severe power issues. Moreover, its true double-conversion design removes surges, sags, and spikes for safe device operation. Therefore, it fits companies and users who need dependable backup without interruption. First, the PCE EX Online 6 KVA 5400W supplies pure sine wave output for sensitive electronics like servers, workstations, and networking gear. This helps protect your devices from damage and performance drops. In addition, the online design ensures seamless switching between mains and battery power. As a result, connected equipment stays powered without sudden shutdowns during outages. Next, this UPS supports a high load capacity for multiple systems at once. You can run large setups including computers, storage units, and critical machinery. Furthermore, advanced battery management maximizes runtime and extends battery health. This means longer backup support when power cuts last. Meanwhile, the LCD display shows real-time status, load, and battery info for easy monitoring. The durable build quality makes the unit reliable for daily heavy use and long operational hours. Additionally, installation and setup are quick, with minimal steps required. Consequently, you save time and avoid complex configurations. Also, the UPS includes advanced safety features to prevent overloads and short circuits for extra peace of mind. Smart communication options integrate with software for automatic shutdown and alert notifications. This keeps systems protected even when you are away. Moreover, the UPS runs quietly and remains cool under full load without noise disruption. Therefore, it fits well in busy workspaces without distraction. Overall, the PCE EX Online 6 KVA 5400W delivers seamless power backup, strong protection, and stable performance. It provides great value for users who need reliable power security for critical systems. Specifications: Voltage : 220V, 230V, or 240V Capacity :12v/7Ah Frequency:50/60 Hz
Key Features Output Connections (1) IEC 60320 C19 Input Connections Schuko CEE 7 / EU1-16P Cord Length 8.2ft (2.5meters) Power Cord, C19 to CEE/7 Schuko, 2.5m Wide selection of Rack PDU power cords for a variety of IT equipment. Specifications : Output Overload Protection No Maximum Total Current Draw 16 Input Input frequency 50/60 Hz Acceptable Input Voltage 90 – 250VAC Number of Power Cords 1 Maximum Input Current 16A Maximum Line Current 16A Physical Net Weight 0.49lbs. (0.22KG) Shipping weight 0.66lbs. (0.3KG) Shipping Height 2.01inches (51MM, 5.1CM) Shipping Width 4.02inches (102MM, 10.2CM) Shipping Depth 7.99inches (203MM, 20.3CM) Color Black Environmental Operating Temperature 32 – 113 °F (0 – 45 °C) Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 10000ft (0 – 3048meters) Storage Temperature -25 – 65 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 50000ft (0 – 15240meters) manufacturer link
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
The PROLINK IPS5003 Inverter is designed to provide reliable backup power for homes, offices, and essential electronic devices. It helps users maintain power during outages and supports stable operation for different electrical equipment. The inverter provides a 5000VA capacity and delivers stable AC power output for compatible devices. Additionally, it supports backup power needs for appliances, computers, and other important electronics. The PROLINK IPS5003 features pure sine wave output to provide clean power for sensitive equipment. Moreover, this technology helps improve compatibility with devices that require stable electricity performance. The inverter includes an LCD display that allows users to monitor important system information. Furthermore, users can check battery status, input voltage, output voltage, and operating conditions easily. The PROLINK IPS5003 includes protection features against overload, short circuit, over-temperature, and low battery conditions. Therefore, it helps protect connected devices and improves system safety during operation. The inverter supports different backup power applications for homes and small offices. In addition, its practical design makes it suitable for users who need dependable energy support during power interruptions. The PROLINK IPS5003 Inverter combines high power capacity, pure sine wave technology, monitoring features, and protection functions. As a result, it provides a reliable backup power solution for everyday electrical needs. manufacturer link Specifications: Capacity: 5000VA Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Low Battery Protection Application: Backup Power for Home and Office Equipment
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
UPS HAWK 2000VA 2kva 1 year warranty
Vertiv Emerson Liebert itON LI32121CT00 800VA
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
PCE MX Online 6KVA 5400W Internal Batteries Double Conversion Online- Pure Sine Wave
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
