The Linksys Dual-Band Mesh WiFi Atlas 6 System MX2001-KE delivers fast and reliable WiFi coverage for homes and small offices. First, it uses dual-band technology to reduce congestion and provide smooth connections for multiple devices. In addition, the system supports mesh networking, allowing users to expand coverage with additional nodes. Devices automatically connect to the strongest signal for uninterrupted streaming, gaming, and browsing. Moreover, the system includes easy setup through the Linksys app and robust security features to protect your network. Finally, its compact design fits into any space while ensuring stable performance. Specifications: Dual-band WiFi 6 technology for fast, reliable connections Mesh networking for expanded coverage and seamless roaming Connect multiple devices with reduced network congestion Easy setup and management via the Linksys app Compact design with robust security features
Gigabit Ethernet,1x Combo port SFP or Gigabit Ethernet 1xSFP The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput. This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
The TP-Link OC300 is a professional hardware controller. It centralizes management for Omada networks. As a result, network administration becomes simple and efficient. Centralized Omada Network Management This controller manages Omada access points, switches, and gateways. Therefore, configuration stays consistent across devices. Moreover, centralized control reduces setup time. As a result, large networks remain easy to manage. Secure and Stable Hardware Design The OC300 uses a dedicated hardware platform. Therefore, it offers higher stability than software controllers. Moreover, data stays secure with local management. As a result, network reliability improves. Cloud Access and Remote Management This controller supports Omada Cloud access. Therefore, administrators can manage the network remotely. Moreover, real-time monitoring provides instant insights. As a result, troubleshooting becomes faster. Professional Installation and Easy Setup The OC300 supports rack or desktop installation. Therefore, it fits different environments. Moreover, setup is straightforward through the Omada interface. In conclusion, it is an ideal controller for business networks. Specifications: Interface : 2× 10/100/1000 Mbps Ethernet Ports, 1× USB 3.0 Port Omada hardware controller for business networks Centralized management for APs, switches, and gateways Secure local control with dedicated hardware Secure local control with dedicated hardware Rack-mount or desktop installation Rack-mount or desktop installation
Linksys Dual-Band Mesh WiFi 6 System, 1-Pack MX2001′ Coverage up to 2000 sq. ft., 25+ devices, and speed up to 3.0 Gbps* WiFi 6 means higher speeds for streaming and gaming Intelligent Mesh for more coverage for more devices Life Tested means reliability you can depend on 160 MHz channels for more power and a stronger connection Qualcomm™ Immersive Home 214 Platform chipset inside for next-gen wire-like stability and performance Easy set-up control through the Linksys App Specifications: Linksys Dual-Band Mesh WiFi 6 System, 1-Pack MX2001 Coverage up to 2000 sq. ft., 25+ devices, and speed up to 3.0 Gbps* WiFi 6 means higher speeds for streaming and gaming Intelligent Mesh for more coverage for more devices Life Tested means reliability you can depend on
PCE M8-700 UPS (line-interactive) — 700 VA / 360 W backup unit for 220–240 V input. Protects PCs, routers, small electronics from outages and voltage swings. The PCE M8-700 is a line-interactive UPS designed for home or small office use. It provides backup power, voltage regulation (AVR), surge protection, and supports automatic switching during outages. Ideal for desktop PCs, network gear, monitors, or point-of-sale systems. Features & Capabilities Line-interactive topology: regulates input voltage without switching to battery when voltage fluctuates mildly. Automatic Voltage Regulation (AVR) to correct undervolt/overvolt conditions. Simulated (stepped) sine wave output in battery mode. Surge, overload, short circuit, discharge protections built in. Cold start capability (ability to power on from battery with no mains) LED + audible alarms for status (battery mode, overload, fault) USB / RS232 interface in some variants for power management (shutdown, monitoring) Technical Specifications What “Input 220–240 VAC, 50/60 Hz, 3.7 A” Means (and Caveats) If the specification you’re giving is “3.7 A” at input, that corresponds to a maximum input current draw when the UPS is handling a heavy load or during charging cycles. At 230 V × 3.7 A ≈ 850 W of input capacity. The unit’s 360 W output means there’s overhead for losses, inverter inefficiency, battery charging, etc. The UPS must operate within the stated voltage and frequency ranges — if input is too low or too high, it may switch to battery or go into protection mode.
The PROLINK PIC3001WP IP Camera is designed for home and office monitoring, providing a smart surveillance solution with wireless connectivity and remote access features. It allows users to monitor spaces through a mobile application for convenient security management. The camera features Full HD 1080p video resolution to provide clear image quality for daily monitoring needs. Additionally, its pan and tilt functionality allows users to adjust the viewing direction remotely and cover a wider area. The PROLINK PIC3001WP uses a 1/2.7-inch CMOS image sensor and includes a 3.3mm fixed lens with a 110-degree field of view. Moreover, the camera supports infrared night vision with automatic IR LED activation for low-light environments. The camera supports Wi-Fi connectivity through IEEE 802.11 b/g/n wireless technology. Furthermore, it includes an RJ-45 Ethernet port for wired network connection and a microSD card slot that supports local recording storage. The PROLINK PIC3001WP includes two-way audio communication with a built-in microphone and speaker. Therefore, users can communicate remotely while monitoring their home or office environment. In addition, motion detection features provide alerts through supported mobile devices. The camera supports multiple recording options, including microSD card recording, NAS storage, Dropbox storage, and manual recording through the mobile application. Also, users can manage monitoring functions through the PROLINK mCam application. The PROLINK PIC3001WP combines Full HD monitoring, wireless connectivity, remote pan and tilt control, and two-way audio in a compact security camera solution. As a result, it provides a practical option for users who need flexible indoor surveillance. Specifications: Resolution: Full HD 1920 x 1080 Sensor: 1/2.7-inch CMOS image sensor Wireless Standard: IEEE 802.11 b/g/n Wi-Fi Storage: microSD card support up to 64GB Lens: 3.3mm fixed lens with 110° viewing angle
90W Adapter Laptop Charger for Toshiba Satellite L305 L305D L455 L505 L505D L635 L645 L655 L655D L745 L755 L775 L855 L875 A105 A135 C655 C675 C850 C855; PA3714U-1ACA PA5035U-1ACA Power Cord
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
Premium PTZ camera with Ultra-HD imaging system and automatic camera control RightSense™ technology
Professional Lavalier Microphone Candc DC-C6 Professional Lavalier Microphone Candc DC-C6 Candc DC-C6 Lavalier Microphone for Smartphones, DSLR, Camcorders, Audio recorders, PC etc. Clip microphone to help you get music or sound.One-directional microphone with anti-noise function. type jack can be connected to PC / laptop / wireless microphone transmitter with 3.5mm line-in / mic in. Built-in clip can be easily attached to collar, tie or other clothes-no installation required. Features: Type: microphone Cable length: about 116 cm Sensitivity: -46 ± 2db : one way Operating voltage: DC1.0V-10 VAcurrent consumption
