Haixun F20 Barcode Reader – USB 2D handheld scanner supports QR, PDF417, and 1D barcodes.Fast and reliable for retail, inventory, and logistics with plug-and-play setup. Model: Haixun F20 Type: 2D Handheld Barcode Scanner Supported Codes: 1D: EAN-13, UPC-A, Code 39, Code 128, Codabar, etc. 2D: QR Code, PDF417, DataMatrix, etc. Supported Codes: 1D: EAN-13, UPC-A, Code 39, Code 128, Codabar, etc. 2D: QR Code, PDF417, DataMatrix, etc. Sensor Type: CMOS imaging sensor Interface: USB (Plug and Play, no driver needed) Scan Mode: Manual trigger / Continuous / Auto-sensing Scan Speed: Up to 300 scans/sec Resolution: ≥ 4mil (0.1mm) Light Source: Red LED + White fill light Compatibility: Windows, Android, macOS, Linux Design: Ergonomic grip for long use Durable ABS plastic body Design: Ergonomic grip for long use Durable ABS plastic body Cable Length: Approx. 1.5 – 2 meters Power Supply: 5V (via USB) Applications: Retail, Warehouse, POS, Inventory, Logistics
Xprinter XP-80T 80mm Thermal Receipt Printer Press to download driver: XPrinter Driver Setup V7.77
GSAN GS-3021 POS All in One Touch 15.6" - Intel i5 - 8GB - 128GB SSD with Customer Display Main Board: POS motherboard CPU: I5-3RD GEN Memory: DDR3 8GB Hard Disk: 128GB Power: External power supply Input: 110V-240V 50/63Hz 2A Output: 12V DC 8A 96W MAX Interface: 6 USB port 1 LAN port
A robust Beurotika cash drawer featuring a 450mm metal body, secure 3-position lock, and compatibility with most POS systems—ideal for retail, restaurants, and small businesses. Secure 3-position key lock: Open, locked, and release-to-print modes for controlled access 6 coin slots + 4 bill compartments: Organized layout for efficient cash handling Heavy-duty steel construction: Reinforced frame and smooth slide rails for daily reliability Standard RJ12 interface: Compatible with most POS systems (e.g., Epson, HP, Bixolon, and Beurotika receipt printers) Auto-open trigger: Automatically opens when connected to a compatible receipt printer during transactions Bottom cable entry: Keeps wiring neat and protected
Epson L1800 ITS printer Compatible Toners : T6731 : Black T6732 : Cyan T6733 : Magenta T6734 : Yellow T6735 : Light Cyan T6736 : Light Magenta A compact six-colour A3+ printer for cost-conscious homes and offices, the L1800 prints a 10x15cm photo in around 45 seconds. Its high-capacity ink tank system allows it to print 1,500 10x15cm photos without a refill. With minimal intervention, it delivers cost-effective and hassle-free printing of photos and colour documents for homes, photographers and offices wanting to print in high volumes. Ultra-low-cost printing Deliver ultra-low cost per page thanks to the EcoTank’s innovative cartridge-free filling system with easy-to-use bottles. The L1800 allows you to print up to 1,500 (10×15) high-quality photos with the included ink bottles2. Increase productivity Say hello to EcoTank’s integrated ink tank, and leave the hassle of cartridges behind you. Using the 70ml ink bottles included with purchase, you’ll be able to print up to 1,500 quality 10x15cm photos before needing to refill2. And when it’s finally time to refill, there’s no mess thanks to drip-free nozzles and intuitive ink top-up technology. Quality results Enjoy next generation print quality and reliability with a Micro Piezo printhead, standard with all EcoTank printers. And what’s more, a promotional three-year warranty is included3. Join 50m customers worldwide Since Epson started making EcoTanks in 2010, over 50m EcoTanks have been sold worldwide4, making Epson the no. 1 ink tank printer in the world5. 7 out of 10 ink tank printers sold in the Middle East and Africa are Epson5. Key Features Ultra-low-cost Purpose-built, refillable ink tank Photo printing 6-colour A3+ printer Compact design Small footprint ideal for home use Peace of mind Covered by Epson’s warranty User-friendly Hassle-free with simple set-up Full Specifications : Printing Method Epson Micro Piezo™ print head Nozzle Configuration 90 Nozzles Black, 90 Nozzles per Color Minimum Droplet Size 1.5 pl, With Variable-Sized Droplet Technology Ink Technology Dye Ink Printing Resolution 5,760 x 1,440 DPI Category Home, Photo Specifications: Specifications : -Inkjet Printer, Consumer/Plain -A3+ -6 Ink Cartridges -CYlMKlCM, 5,760 x 1,440 dpi -15 Pages/min Monochrome (plain paper) -45 Seconds per 10 x 15 cm photo (Epson Premium Glossy Photo Paper) -15 Pages/min Color (plain paper) -100 Sheets Standard -30 Photo Sheets, Memory Cards, USB, Mac OS 10.5+, Windows 7, Windows 8, Windows Vista, Windows XP -6 x 70ml individual ink bottles (Bk,C,Y,M,Lc,LM), Driver and utilities (CD), Main unit, Power cable 1 Year Warranty manufacturer link
10 Gigabit Performance yet Low Cost and Low Power PLANET has upgraded and released a new version of ENW-9803 10Gbps PCI Express Server Adapter. The new ENW-9803 is using Marvell 88X3310P PHY, it is a low power, high performance NBASE-T PHYs devices that support IEEE 802.az Energy Efficient Ethernet (EEE). The new ENW-9803 NIC adapter reference design supports auto-negotiation for allowing the NBASE-T solution to optimally select the best and flexible speed like 10 Gigabit Ethernet (10GbE), 5 Gigabit Ethernet (5GbE), 2.5 Gigabit Ethernet (2.5GbE), 1Gigabit Ethernet (GbE) or 100 Megabit Ethernet (100MbE) over Cat5e/Cat6 or better cabling. It is designed to address system application requirements by offering the best cost, 10Gbps high performance, low-power consumption and better-quality solution in the 10Gbps network market today. Cost-effective and Ideal 10G Copper NIC Adapter Compared with 10G adapter with CX4 and SFP+ interface, PLANET 10GBASE-T PCI-E adapter is the best choice in that the ENW-9803 10GBASE-T can reach up to 100 meters over Cat.6a or Cat.7 RJ45 cable, whereas the CX4 and SFP+ interface only can work with fixed speed rate but the ENW-9803 10G copper NIC adapter can adjust and work with the speed rate of 100M/1G/2.5G/5G. Not only that the CX4 interface only can extend up to 15 meters in distance. The cost is too high for having an extra SFP+ interface for the SFP+ transceiver. However, with the ENW-9803, customers only spend on Cat.6a or Cat.7 cable as the ENW-9803 is bundled with RJ45 connector, thus costing less than the SFP+ transceiver. 10GbE Device Designed for Low-power, Low-cost and Single-port Applications The ENW-9803 is an optimized 10GbE device designed for low-power, low-cost and single-port applications required in application servers, high-end workstations and personal computers. This makes it ideal for enabling 1GbE to migrate to 10GbE for bandwidth-intensive workstation applications and low-end to mid-range network appliances. With the innovative PCI Express Bus Architecture, it offers increased bandwidth, reliability and additional functionality compared with standard GbE network cards. The performance of throughput at rates up to 20Gbps is unbelievable, thus eliminating the bottleneck that exists with the current Gigabit network. PLANET ENW-9803 is designed to connect your servers and workstations, guaranteeing extremely high throughput and excellent signal quality. Standard 802.1Q VLAN Support Moreover, the ENW-9803 supports IEEE 802.1Q VLAN which allows it to operate in a flexible and secure network environment. With 9K jumbo frame ability and IEEE 802.3 flow control support, it further optimizes throughput and wire-speed packet transfer performance without risk of packet loss. The high data throughput of the device makes it ideal for most 10 Gigabit Ethernet environments. Multiple OS Support The ENW-9803 operates completely well with most of the popular and latest operating systems including Microsoft Windows Server, Linux and VMware, enabling simple integration into network designs. There is no need of any modification to the server’s operating system or any special software required for the ENW-9803 to be integrated into the system. 1 Year Warranty
The HP Pro Tower 290 G9 B70SMAT$ABV delivers reliable performance with its Intel Core i3-13100 processor, featuring 4 cores and 8 threads running at up to 4.5GHz. As a result, it handles office applications, multitasking, and daily computing tasks efficiently, making it ideal for small businesses, home offices, and students. Equipped with 8GB of RAM and a 512GB NVMe SSD, this desktop provides fast and responsive performance. In addition, the storage ensures quick boot times and ample space for files, applications, and media. Therefore, users can complete tasks without lag or delays. The system comes with Intel UHD Graphics 730 for basic multimedia and business graphics needs. Furthermore, it includes VGA and HDMI ports, WiFi, and Bluetooth for easy connectivity with displays, peripherals, and networks. Moreover, the package includes a keyboard and mouse, offering a complete desktop setup out of the box. HP designed this tower with DOS pre-installed, giving users the flexibility to install their preferred operating system. Consequently, it adapts to various office and home setups. Overall, the HP Pro Tower 290 G9 combines dependable hardware, essential features, and connectivity options for a versatile and practical desktop solution. This desktop is an excellent choice for users seeking a reliable, ready-to-use PC for professional and personal use. Specifications: Intel Core i3-13100 CPU 4C 8T 4.5GHz for smooth performance 8GB RAM for multitasking 512GB NVMe SSD for fast storage and boot Intel UHD 730 graphics with VGA and HDMI ports WiFi, Bluetooth, keyboard and mouse included, DOS OS
Description : Wired Combo Keyboard keyboard Ultra -Thin Chocolate key Wire Keyboard comfortable design Keyboard With Numeric Keypad & Multimedia Keys Plug and play Interface Type: USB Button of keyboard: 104keys Size: 437.5*126*25.8cm Weight: 550g Material :ABS+ Plastic Cable Length: 1.7m Lifespan of Key-stoke: 5 million times System:PC Win2000/Win XP/WINME/Vista/Win7/Win8/Win10/MAC Mouse Plug and play Interface Type: USB dpi -1200 dpi Button : 3 Size:115*60*34mm Weight:60g Material :Plastic Cable Length: 1.5m Lifespan of Key-stoke: 5 million times System: PC Win2000/Win XP/WINME/Vista/Win7/Win8/Win10/MAC
Original product name: Canon Laser – 3 in 1 MF232W PRINT/COPY/SCAN 23 PPM, 1200*1200 DPI print resolution, 256MB Built in memory, 250-sheet tray, 1-sheet multi-purpose tray, 6 seconds First Print Out Time, scan to PC Canon Laser – 3 in 1 MF232W PRINT/COPY/SCAN 23 PPM, 1200*1200 DPI print resolution, 256MB Built in memory, 250-sheet tray, 1-sheet multi-purpose tray, 6 seconds First Print Out Time, scan to PC, 5 line LCD display, Duty cycle 15,000 pages per month, Network, WI-FI(Airprint,Mopria certified) Cartridge 737 (yield = 2400 pages) INK
TP-Link Archer TX1U Nano AX300 Wi-Fi 6 USB Adapter is designed for fast wireless upgrades on laptops and desktop PCs. TP-Link builds this nano adapter for users who need compact size, stable speed, and simple plug-and-play setup. TP-Link equips the Archer TX1U Nano with Wi-Fi 6 support and speeds up to 287Mbps on the 2.4GHz band. Additionally, it improves efficiency with OFDMA and MU-MIMO when used with compatible routers. It supports IEEE 802.11 b/g/n/ax standards through a USB 2.0 interface. TP-Link designs the adapter in a very small nano size for portability and daily use. Moreover, it includes a preloaded internal driver for quick installation without extra setup steps. The compact body measures only 17.5 × 15.8 × 7.1 mm. TP-Link also adds Access Point mode, which allows users to create a Wi-Fi hotspot from a connected device. Furthermore, it supports Windows 11, 10, 7, and Linux Kernel 3.10 or later for wide compatibility. TP-Link Archer TX1U Nano AX300 Wi-Fi 6 USB Adapter delivers compact wireless performance, simple setup, and reliable everyday connectivity. Specifications: Wi-Fi 6 AX300 speed with up to 287Mbps on 2.4GHz Nano-sized design for portable and low-profile use OFDMA and MU-MIMO support for better efficiency Preloaded internal driver for easy plug-and-play setup Supports Windows 11, 10, 7 and Linux systems
