The Ruijie Reyee RG‑EW1200 is a dual‑band AC1200 router for home and small office use. It supports Wi‑Fi 5 (802.11ac Wave 2) with speeds of up to 300 Mbps (2.4 GHz) and 867 Mbps (5 GHz). Four omnidirectional antennas ensure stable Wi‑Fi signals across rooms. By using Reyee Mesh, you can link multiple units for seamless coverage and easy expansion. It supports parental controls, health mode, and app-based configuration via the Reyee Router App. The router can manage up to 96 devices simultaneously, ideal for busy households. There is 1 WAN port and 3 LAN ports with fast 10/100/1000 Mbps connection support. Installation takes only a few minutes using the Reyee app. Setup includes remote reboot, bandwidth sharing, and Xpress mode. Users report that mesh setup is easy by pressing the mesh button on units close by. Others praise the signal reach, especially on 2.4 GHz, even through multiple walls. However, wired connections in AP mode tend to preserve speed better than extender mode. Some find that firmware lacks advanced options like SQM or WireGuard VPN support. Also, once linked to a Reyee cloud account, devices may remain locked unless removed manually. Overall, the Ruijie Reyee RG‑EW1200 router offers solid mesh Wi‑Fi 5 performance with app-based control, good coverage, and strong device capacity. It’s an affordable choice for modern homes or small offices. Specifications: Wireless Standards : Wi-Fi 5 (802.11ac) MIMO : 2.4 GHz: 2×2 5 GHz: 2×2 Antennas : 4 Interface : 1 x 10/100 Base-T WAN , 3 x 10/100 Base-T LAN Max. Wi-Fi Speed : 2.4 GHz: 300 Mbps 5 GHz: 867 Mbps Recommended Users : 24 Antenna Gain : 2.4 GHz: 5 dBi 5 GHz: 5 dBi Operating Mode : Router, Repeater, AP, WISP
10 Gigabit Performance yet Low Cost and Low Power PLANET has upgraded and released a new version of ENW-9803 10Gbps PCI Express Server Adapter. The new ENW-9803 is using Marvell 88X3310P PHY, it is a low power, high performance NBASE-T PHYs devices that support IEEE 802.az Energy Efficient Ethernet (EEE). The new ENW-9803 NIC adapter reference design supports auto-negotiation for allowing the NBASE-T solution to optimally select the best and flexible speed like 10 Gigabit Ethernet (10GbE), 5 Gigabit Ethernet (5GbE), 2.5 Gigabit Ethernet (2.5GbE), 1Gigabit Ethernet (GbE) or 100 Megabit Ethernet (100MbE) over Cat5e/Cat6 or better cabling. It is designed to address system application requirements by offering the best cost, 10Gbps high performance, low-power consumption and better-quality solution in the 10Gbps network market today. Cost-effective and Ideal 10G Copper NIC Adapter Compared with 10G adapter with CX4 and SFP+ interface, PLANET 10GBASE-T PCI-E adapter is the best choice in that the ENW-9803 10GBASE-T can reach up to 100 meters over Cat.6a or Cat.7 RJ45 cable, whereas the CX4 and SFP+ interface only can work with fixed speed rate but the ENW-9803 10G copper NIC adapter can adjust and work with the speed rate of 100M/1G/2.5G/5G. Not only that the CX4 interface only can extend up to 15 meters in distance. The cost is too high for having an extra SFP+ interface for the SFP+ transceiver. However, with the ENW-9803, customers only spend on Cat.6a or Cat.7 cable as the ENW-9803 is bundled with RJ45 connector, thus costing less than the SFP+ transceiver. 10GbE Device Designed for Low-power, Low-cost and Single-port Applications The ENW-9803 is an optimized 10GbE device designed for low-power, low-cost and single-port applications required in application servers, high-end workstations and personal computers. This makes it ideal for enabling 1GbE to migrate to 10GbE for bandwidth-intensive workstation applications and low-end to mid-range network appliances. With the innovative PCI Express Bus Architecture, it offers increased bandwidth, reliability and additional functionality compared with standard GbE network cards. The performance of throughput at rates up to 20Gbps is unbelievable, thus eliminating the bottleneck that exists with the current Gigabit network. PLANET ENW-9803 is designed to connect your servers and workstations, guaranteeing extremely high throughput and excellent signal quality. Standard 802.1Q VLAN Support Moreover, the ENW-9803 supports IEEE 802.1Q VLAN which allows it to operate in a flexible and secure network environment. With 9K jumbo frame ability and IEEE 802.3 flow control support, it further optimizes throughput and wire-speed packet transfer performance without risk of packet loss. The high data throughput of the device makes it ideal for most 10 Gigabit Ethernet environments. Multiple OS Support The ENW-9803 operates completely well with most of the popular and latest operating systems including Microsoft Windows Server, Linux and VMware, enabling simple integration into network designs. There is no need of any modification to the server’s operating system or any special software required for the ENW-9803 to be integrated into the system. 1 Year Warranty
The Prolink DH-5106U AX900 Wi-Fi 6 USB Adapter is designed to provide faster and more reliable wireless connectivity for desktop computers and laptops. It allows users to upgrade devices without built-in Wi-Fi or improve existing wireless performance with modern Wi-Fi 6 technology. Featuring Wi-Fi 6 technology, the adapter supports improved network efficiency, lower latency, and better performance in environments with multiple connected devices. Additionally, its dual-band capability allows users to connect through either 2.4GHz or 5GHz frequencies depending on their network needs. The Prolink DH-5106U delivers wireless speeds of up to 600Mbps on the 5GHz band and up to 286Mbps on the 2.4GHz band. Moreover, it supports IEEE 802.11ax/ac/n/a on 5GHz and IEEE 802.11ax/b/g/n on 2.4GHz for flexible compatibility with modern and existing networks. The adapter uses a USB 2.0 interface for easy installation and connection. Furthermore, its built-in antenna design provides a compact solution that is suitable for everyday wireless networking needs. The Prolink DH-5106U supports technologies such as MU-MIMO and OFDMA to improve wireless efficiency and connection performance. In addition, it is compatible with Windows 10, Windows 11, and Linux operating systems for wider device support. The compact design makes the adapter convenient for home, office, and mobile setups. Therefore, users can easily add Wi-Fi 6 connectivity to compatible computers without installing an internal wireless card. The Prolink DH-5106U AX900 Wi-Fi 6 USB Adapter combines modern wireless technology, dual-band connectivity, and simple USB installation. As a result, it provides a practical solution for improving wireless network access on compatible devices. Specifications: Wireless Standard: IEEE 802.11ax/ac/n/a (5GHz), IEEE 802.11ax/b/g/n (2.4GHz) Signal Rate: Up to 600Mbps (5GHz), up to 286Mbps (2.4GHz) Interface: USB 2.0 Antenna: Internal antenna Operating System Support: Windows 10/11 and Linux
Linksys Business LGS308MP PoE+ Smart 8 Port Gigabit Network Switch (130W) Manufacturer’s Product-Link
The Fantech WG9S Kanata S is a dual-mode gaming mouse designed for both wired and wireless use. It features an optical gaming sensor with up to 12000 DPI for adjustable sensitivity in different games and tasks. It supports both USB wired connection and StrikeSpeed wireless mode. As a result, users can switch between stable wired input and wireless freedom depending on usage. In addition, it includes 6 programmable buttons for basic gaming controls and shortcuts. The mouse uses a built-in 300mAh rechargeable battery. Therefore, it can deliver up to around 70 hours of usage depending on settings. Meanwhile, it charges via USB when needed. It is equipped with a PixArt 3311 sensor with up to 1000Hz polling rate. In addition, it supports up to 300 IPS tracking speed and 35G acceleration for responsive movement. Overall, the WG9S Kanata S is a mid-range dual-mode gaming mouse focused on high DPI performance, wireless flexibility, and long battery life. Specifications: Dual-mode: wired USB + StrikeSpeed wireless Up to 12000 DPI PixArt 3311 sensor 300mAh battery (up to 70 hours use) 6 programmable buttons 1000Hz polling rate with 35G acceleration
The PROLINK PIC1010WP Wireless IP Camera is designed to provide flexible indoor surveillance with wireless connectivity, remote monitoring, and smart recording features. It allows users to monitor homes, offices, and other spaces through compatible devices. The camera features a high-definition dual-lens design with pan and tilt control for wider area coverage. Additionally, the remote pan and tilt function allows users to adjust the viewing direction and monitor different areas without physically moving the camera. The PROLINK PIC1010WP supports HD video recording with resolutions up to 1280 × 800 and uses H.264 video compression for efficient video storage and streaming. Moreover, it supports separate video settings for different viewing devices. The camera includes 2.4GHz Wi-Fi connectivity and also supports wired network connection through an RJ45 Ethernet port. Furthermore, the wireless setup supports WEP and WPA/WPA2 security modes for network protection. The PROLINK PIC1010WP includes day and night monitoring with separate sensors and infrared LED support for low-light environments. In addition, the built-in microphone and speaker provide two-way audio communication. The camera supports local recording through an SD card and also works with NAS and cloud storage options. Therefore, users can store recorded footage and review important events when needed. Motion and sound detection features allow the camera to send notifications when activity is detected. Moreover, the plug-and-play setup makes installation easier for home and office users. The PROLINK PIC1010WP combines wireless monitoring, pan and tilt control, recording options, and two-way audio in a compact security solution. As a result, it provides a practical option for users who need flexible surveillance capabilities. Specifications: Resolution: Up to 1280 × 800 HD video Sensor: RGB Mega 1/4-inch CMOS sensor Connectivity: 2.4GHz Wi-Fi and RJ45 Ethernet Lens: 3.3mm fixed lens, 70° viewing angle Storage: SD card, NAS, and Dropbox recording support
The PANPOWER Online UPS 3000 VA is designed to provide reliable power protection for computers, workstations, networking equipment, office devices, and other sensitive electronics. It helps maintain stable operation during power interruptions, voltage fluctuations, and unstable electrical conditions. With a 3000VA capacity and 2100W output power, this UPS provides dependable backup power for professional and small business environments. Additionally, it delivers pure sine wave output to provide clean and stable power for connected equipment. The UPS features an online interactive design with Automatic Voltage Regulation (AVR) to help maintain consistent output voltage. Moreover, its wide input range allows reliable operation in environments with changing power conditions. The PANPOWER Online UPS 3000 VA includes a smart battery charging system designed to optimize battery performance. Furthermore, it supports compatibility with mains power and generator input for flexible installation options. Protection features help safeguard connected devices against overload, short circuits, input power issues, and battery-related problems. Therefore, it is suitable for protecting important equipment such as computers, office systems, printers, and CCTV devices. The UPS includes an LCD display for monitoring system status and operating information. In addition, communication options including USB, RS232, and optional SNMP support allow easier monitoring and management. The PANPOWER Online UPS 3000 VA combines stable power delivery, reliable backup performance, and advanced protection features in a practical solution. As a result, it provides dependable power support for users who require continuous equipment operation. Manufacturer link Specifications: Capacity: 3000VA / 2100W UPS Type: Online Interactive UPS Output Waveform: Pure Sine Wave Communication: USB, RS232, Optional SNMP Display: LCD Status Display
Wireless freedom with zero compromise. The A4Tech 3330N is a high-performance 2.4GHz wireless combo that combines the GK-3 full-size keyboard with the G3-330N optical mouse. Featuring a 10–15m operating range, 12-month battery life, and 12 multimedia hotkeys, it’s the perfect plug-and-play solution for a clean, cable-free workspace. The A4Tech 3330N Wireless Desktop is engineered for consistent stability and long-term durability. Utilizing advanced Smart Wireless SoC technology, this set minimizes circuit loss and interference, providing a reliable connection that feels as responsive as a wired setup. Key Features: Consistent Wireless Stability: Advanced 2.4GHz powerful wireless connection with a distance of up to 10–15 meters. Auto-channel stabilizing ensures essentially no delays or connection conflicts. Energy Efficient Design: Enjoy up to 12 months of battery life thanks to energy-efficient engineering. The set also features Auto Power Saving with a 4-level sleep mode that activates after just 0.2s of inactivity. Full-Size Multimedia Keyboard: The GK-3 keyboard includes 12 Fn hotkeys for quick access to media controls, along with laser-inscribed keys that never fade and adjustable legs for ergonomic comfort. Precision Optical Mouse: The included G3-330N mouse offers a 1200 DPI resolution for smooth and accurate tracking. Its symmetric design makes it comfortable for both right and left-handed users of all hand sizes. 16-in-One Gestures: The mouse supports 16 different gestures to perform selectable hotkey commands, enhancing your workflow and productivity. Spill-Resistant Durability: The keyboard is designed with built-in drain holes, ensuring that accidental liquid spills won’t end your workday. Specifications at a Glance: Connection: 2.4G Hz Wireless (Nano USB Receiver) Keyboard Model: GK-3 (Full-Size) Mouse Model: G3-330N (1200 DPI Optical) Operating Range: 10 to 15 Meters Hotkeys: 12 Fn Multimedia Hotkeys Battery: 1 AA for Keyboard, 1 AA for Mouse (Up to 12 months) Compatibility: Windows 7 / 8 / 8.1 / 10 / 11
Jabra 8100-119 Jabra 8100-119 features three sensors that record at the same time. and the images are automatically stitched in-camera .180° image. The PanaCast 180° Panoramic 4K UHD Conferencing Camera from Jabra features three sensors. that record at the same time, and the images are automatically stitched in-camera. to provide an immersive 180° image. With this field of view, the camera delivers a panoramic. image in UHD 4K resolution. Generally, everyone on one side of a room can be captured in a shot. This capability is especially useful in smaller meeting rooms or home offices. Features A key feature of this PanaCast camera is Intelligent Zoom, which automatically zooms in or out depending . on how many meeting participants are present. When, for example, the number of participants . increases from three to five, the camera will zoom out to ensure that all five are visible in the shot. Likewise, it will zoom in when the situation is reversed to highlight the speaker and not display an empty room. Additionally, via a feature called Vivid HDR, the camera automatically adjusts contrast whenever lighting conditions change. so that the image is balanced and displayed in optimal quality. PanaCast features two built-in mics and supports an optional Jabra Speak 710 external speaker for a more . comprehensive and professional meeting room experience. While this PanaCast camera works right out of the box, you can also its setting using the Jabra Direct software, compatible with Windows and Mac. In this application you can adjust. the field of view between 90, 120, 140, and 180°. You can also use electronic choose to turn off Intelligent Zoom or Vivid HDR, disable built-in mics, set line ,and more. This PanaCast device comes with a USB cable so you can plug in and begin right away. Three built-in 13MP cameras record simultaneously Automatic into an 180° UHD 4K image that captures everyone on one side of the room Suitable for meeting rooms from small to large Certified for use with Microsoft Teams Compatible with Skype, Webex, Zoom, GoToMeeting, and more Ultra-lightweight at just 3.5 oz Plug-and-play USB connection (allows instant collaboration) Intelligent Zoom intuitively zooms in/out depending on how many participants are in the meeting (this feature can be disabled) Vivid HDR automatically adjusts contrast when lighting conditions change Specifications: Specifications Flexible Plug-and-Play Meeting Room/Video Solution Camera 180 Degree Field of View
The PANPOWER Online UPS 1000 VA is designed to provide reliable power protection for computers, networking devices, office equipment, and other sensitive electronics. It helps maintain stable power delivery during outages, voltage fluctuations, and electrical disturbances. With a 1000VA capacity and 800W output power, this UPS provides dependable backup support for professional and home environments. Additionally, it delivers pure sine wave output with AVR regulation to help provide clean and stable power for connected equipment. The UPS features an online interactive design with a wide input voltage range of 145V to 275V. Moreover, it supports frequency tolerance from 45Hz to 65Hz, helping maintain reliable operation in different power conditions. The PANPOWER Online UPS 1000 VA includes a smart battery charging system designed to optimize battery performance. Furthermore, it supports lead-acid, gel, or lithium battery configurations depending on user requirements. Protection features help safeguard connected devices against overload, short circuits, input voltage issues, and battery problems. Therefore, it is suitable for protecting computers, networking systems, security equipment, and other important electronics. The UPS includes LCD monitoring and communication options such as USB, RS232, and optional SNMP support. In addition, these features allow users to monitor system status and manage the UPS more effectively. The PANPOWER Online UPS 1000 VA combines reliable backup power, stable output performance, and advanced protection features in a compact solution. As a result, it provides dependable power support for users who need continuous equipment operation. Manufacturer link Specifications: Capacity: 1000VA / 800W Output Waveform: Pure Sine Wave Input Voltage Range: 145V–275V AC Battery Voltage: 24VDC Communication: USB, RS232, Optional SNMP support
