Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The Beco GP800 800VA 480W UPS delivers dependable power protection for home and office electronics. It keeps devices running during short power cuts. This helps prevent data loss and sudden shutdowns. Users enjoy peace of mind with reliable backup power. Moreover, the Beco GP800 UPS features 800 VA capacity and 480 W output power for stronger protection. It supports desktops, routers, modems, and monitors easily. Devices stay powered long enough to save work. Performance remains stable. In addition, the UPS includes built-in surge protection for safety against spikes. It guards appliances from voltage surges and unstable power conditions. This adds extra defense during storms or power fluctuations. Protection stays consistent. Furthermore, the Beco GP800 800VA 480W UPS offers automatic voltage regulation without manual adjustment. It corrects voltage dips and spikes smoothly. This helps maintain steady performance for connected devices. Reliability improves everyday use. Also, the unit provides battery backup during outages to keep systems running. You can finish tasks and save files before shutdown. This reduces the risk of data corruption. Battery backup feels dependable. In addition, the Beco GP800 UPS includes clear LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring simple and fast. Users stay informed. Furthermore, the Beco GP800 UPS supports easy installation and setup. Users can plug in devices quickly without complicated steps. Setup remains stress-free for beginners and experts. Overall, the Beco GP800 800VA 480W UPS delivers reliable battery backup, surge protection, and stable power output. It protects electronics and supports uninterrupted use. This UPS is ideal for users seeking strong, everyday power protection. Specifications: 800VA, 480W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
Original product name: UPS 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery) 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection 2 Years Warranty (Including Battery)
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery
Specifications : High Reliability Advanced DSP (Digital signal processors) technology Variable speed fan Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Advanced digital parallel technology High Availability Wide input voltage range, 50 / 60 Hz frequency auto sensing Linear derating in low voltage input reducing battery discharging times, extending the service life of battery Dual-input design, supporting independent bypass Output power factor improved from 0.9 to 1, load capacity increased by 13% Flexible battery configuration (settable 16 – 20 pcs batteries) Charging voltage and current configured by demands Ability to switch on the UPS with batteries Settable delayed start time when mains power is restored, reducing the impact on power grid or generator Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output High Usability LCD+LED display, multi-functional keys operation, friendly human-machine interface Powerful background software for parameters configuration and online updating Compact internal layout, miniaturized the complete unit for small footprint High Intelligence Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% Energy Conservation and Environment Protection Active power factor correction (APFC), input power factor up to 0.99 High efficiency 95% (up to 98% in ECO mode) Automatic power On/Off according to the load capacity set by users Equipped with self-aging function
APC UPS Accessories SURT48XLBP APC Smart-UPS RT 48V 1/2KVA SURT models Battery Pack
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
The Beco GP2000 2000VA 1200W UPS delivers dependable power protection for home, office, and business systems. It supports high-demand devices like desktops, servers, and networking equipment. This UPS helps prevent data loss and sudden shutdowns during power interruptions. Users enjoy peace of mind with reliable backup. Moreover, the Beco GP2000 2000VA 1200W UPS features a 2000 VA capacity and 1200 W output power for strong performance. It maintains stable power for multiple connected devices. This helps keep critical systems running longer during outages. Reliability stays consistent. In addition, the UPS includes built-in surge protection for safe operation against voltage spikes. It guards your electronics from unpredictable power surges. This adds extra defense during storms or unstable conditions. Device safety remains a priority. Furthermore, the Beco GP2000 2000VA 1200W UPS offers automatic voltage regulation to smooth dips and spikes. It balances fluctuating power automatically. This strengthens system reliability and helps extend equipment life. Power stays steady without manual changes. Also, the UPS provides battery backup when electricity fails. You can save work and shut down systems properly before power runs out. This reduces risk of data corruption. Backup power feels dependable and secure. In addition, the Beco GP2000 2000VA 1200W UPS includes easy-to-read LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring clear and simple. Users stay informed during operation. Moreover, the UPS supports multiple output sockets for connecting several devices simultaneously. This increases flexibility for desks, workstations, and server setups. You can protect many electronics at once. Furthermore, the Beco GP2000 2000VA 1200W UPS supports easy installation with plug-and-play setup. Connections are marked clearly for simple use. Setup remains quick and stress-free. Also, the compact and sturdy design fits neatly on desks or shelves. It blends into home and office spaces easily. Portability stays practical. Overall, the Beco GP2000 2000VA 1200W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. This UPS is perfect for users needing powerful and reliable power protection every day. Specifications: 2000VA, 1200W, LCD, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
The APC 1600VA BX1600MI 900W UPS provides reliable backup power for home and office electronics. First, it delivers line-interactive output to protect devices from voltage fluctuations. In addition, it safeguards connected equipment from surges, spikes, and short outages. Moreover, the compact design allows easy placement near computers or servers. Finally, the LCD indicators display battery and load status for real-time monitoring. The BX1600MI-GR ensures uninterrupted operation and reliable protection for critical devices. manufacturer link Specifications: 900W / 1600VA line-interactive output for reliable device protection Protects electronics from power surges, spikes, and outages Compact design for easy placement near computers or servers LCD indicators for monitoring battery and load status Ensures uninterrupted operation during power interruptions
UPS HAWK 2000VA 2kva 1 year warranty
Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
