Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
UPS ONLINE 3KVA 2400W 1 YEAR WARRANTY ABSOLUTELY PURE SINUSWELLE – With this inverter / inverter you operate your 220V devices via a 24V battery and a continuous power of 2400W 3KVA. Inverter is a device that allows you to use electrical devices everywhere, even when you are not at the power source MULTIFUNCTION HYBRID UNIT – Thanks to the small LCD display, it is also possible to charge the batteries with AC / solar charge controllers, setting the input voltage range and charging current. MODERN PROTECTION FEATURES – The device has many modern safety features such as: overload protection, overheating protection, short-circuit protection, so it is also suitable for home appliances, as well as microwaves, air conditioners, refrigerator, fan and daylight lamp. HIGH QUALITY MATERIALS – Equipped with PWM control, the inverter generates a pleasing amount of waste heat.
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
PCE EX Online 3 KVA 2700W is a double-conversion online UPS designed for continuous and stable power protection. It is used for sensitive equipment such as servers, network systems, and critical office devices that require uninterrupted electricity. In addition, PCE EX Online 3 KVA 2700W uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers clean and stable pure sine wave output for safe operation of connected devices. Furthermore, PCE EX Online 3 KVA 2700W supports a 3000VA / 2700W capacity rating. As a result, it can handle high-load systems such as multiple PCs and networking equipment. It also maintains consistent voltage regulation for sensitive electronics during unstable power conditions. In addition, PCE EX Online 3 KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, voltage fluctuations, and power failures. Moreover, it is designed for long-duration reliability in professional environments. Overall, PCE EX Online 3 KVA 2700W delivers strong performance, zero-interruption switching, and high-level protection for critical power backup needs. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive devices Advanced protection against overload and faults
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
Prolink PRO906WS 6KVA / 4800W Online UPS with AVR is a high-performance power backup solution designed for critical devices, servers, and sensitive electronics. It provides stable and continuous power protection against outages and voltage fluctuations. It features a 6000VA (4800W) capacity with pure sine wave output. Therefore, it ensures clean and reliable power delivery for computers, networking equipment, and industrial systems. In addition, it protects devices from sudden power loss and electrical damage. The UPS uses online double-conversion technology with built-in AVR (Automatic Voltage Regulation). As a result, it delivers consistent voltage output and improves equipment safety during unstable power conditions. It supports heavy-duty usage and long backup operation depending on load. Meanwhile, its robust design makes it suitable for business, IT infrastructure, and professional environments. Prolink designs its UPS systems for reliability and protection. Therefore, this model is an ideal choice for users who need uninterrupted and stable power supply for critical operations. manufacturer link Specifications: 6000VA / 4800W high capacity Pure sine wave output Online double-conversion UPS Built-in AVR voltage regulation Ideal for servers and critical systems
The Yuasa SWL2500T Industrial VRLA Battery delivers reliable power for industrial and backup applications. First, it provides consistent energy output for critical equipment and systems. In addition, the valve-regulated lead-acid (VRLA) technology ensures maintenance-free operation and extended service life. Moreover, the battery features durable construction, vibration resistance, and high discharge efficiency for demanding environments. The compact design allows easy installation in various setups. Finally, its dependable performance, safety features, and long-term reliability make it ideal for industrial, UPS, and emergency power systems. Specifications: VRLA Technology: Maintenance-free operation with long service life High Discharge Efficiency: Reliable power for critical equipment Durable Construction: Resistant to vibration and harsh environments Compact Design: Easy installation in various industrial setups Industrial Reliability: Ideal for UPS, backup, and emergency power
The APC Smart-UPS RC 800W 1KVA Sine Wave SRC1KI provides reliable backup power for critical devices. First, it delivers pure sine wave output, ideal for sensitive electronics. In addition, the UPS protects connected equipment from power surges, spikes, and outages. Moreover, it features a compact design for easy placement in offices or server rooms. Finally, the unit includes an intuitive LCD interface for monitoring battery status and load. The SRC1KI ensures continuous operation and safeguards important systems during power interruptions. Specifications: 800W / 1KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design for office or server room placement LCD interface for monitoring battery and load status Ensures continuous operation during power interruptions
The Beco GP800 800VA 480W UPS delivers dependable power protection for home and office electronics. It keeps devices running during short power cuts. This helps prevent data loss and sudden shutdowns. Users enjoy peace of mind with reliable backup power. Moreover, the Beco GP800 UPS features 800 VA capacity and 480 W output power for stronger protection. It supports desktops, routers, modems, and monitors easily. Devices stay powered long enough to save work. Performance remains stable. In addition, the UPS includes built-in surge protection for safety against spikes. It guards appliances from voltage surges and unstable power conditions. This adds extra defense during storms or power fluctuations. Protection stays consistent. Furthermore, the Beco GP800 800VA 480W UPS offers automatic voltage regulation without manual adjustment. It corrects voltage dips and spikes smoothly. This helps maintain steady performance for connected devices. Reliability improves everyday use. Also, the unit provides battery backup during outages to keep systems running. You can finish tasks and save files before shutdown. This reduces the risk of data corruption. Battery backup feels dependable. In addition, the Beco GP800 UPS includes clear LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring simple and fast. Users stay informed. Furthermore, the Beco GP800 UPS supports easy installation and setup. Users can plug in devices quickly without complicated steps. Setup remains stress-free for beginners and experts. Overall, the Beco GP800 800VA 480W UPS delivers reliable battery backup, surge protection, and stable power output. It protects electronics and supports uninterrupted use. This UPS is ideal for users seeking strong, everyday power protection. Specifications: 800VA, 480W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
APC Easy UPS On-Line SRV 3000VA 230V SRV3KI is a high-performance uninterruptible power supply designed to provide continuous power protection for servers, network equipment, data centers, and critical business systems. It uses true online double-conversion technology to deliver clean and stable power in demanding environments. The UPS provides 3000VA / 2400W power capacity. Therefore, it can support critical equipment during power outages, voltage fluctuations, and electrical disturbances. In addition, it helps maintain business continuity and equipment reliability. It features online double-conversion technology that continuously conditions incoming power. As a result, connected devices receive consistent and clean power regardless of utility power quality. The unit includes an LCD display for real-time monitoring and system management. Meanwhile, automatic bypass functionality helps maintain power delivery during specific operating conditions and maintenance events. APC designs the Easy UPS On-Line series for dependable power protection and efficient operation. Therefore, this model is ideal for servers, network infrastructure, security systems, and mission-critical applications. manufacturer link Specifications: 3000VA / 2400W power capacity Online double-conversion technology Pure sine wave output LCD status and monitoring display Reliable backup for critical systems
The ProLink PRO910WL Professional II Series Online UPS is designed to provide stable and reliable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power interruptions and protects connected devices from unstable electricity. The UPS provides a 10000VA capacity with an 8000W power rating. Additionally, it uses online double conversion technology to deliver clean and consistent power output for sensitive equipment that requires reliable energy support. The ProLink PRO910WL supports pure sine wave output for improved compatibility with different electronic devices. Moreover, its advanced power management system helps maintain stable voltage and frequency during changing power conditions. The UPS includes an LCD display that allows users to monitor important system information. Furthermore, the display provides details about input voltage, output voltage, battery status, load level, and operating conditions. The PRO910WL supports external battery configurations for extended backup time. In addition, it includes protection features against overload, short circuit, over-temperature, and battery-related issues to help protect connected equipment. The UPS is suitable for data centers, offices, industrial environments, and other locations that require dependable power backup. Therefore, it provides a practical solution for users who need continuous power protection for important systems. The ProLink PRO910WL Professional II Series Online UPS combines high power capacity, online protection technology, monitoring features, and safety functions. As a result, it delivers reliable backup power for critical applications. Specifications: Capacity: 10000VA / 8000W UPS Type: Online Double Conversion Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Battery Protection
The APC Easy UPS 1200W / 2200VA BX2200MI-MS provides reliable backup power for critical devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected electronics against surges, spikes, and short outages. Moreover, the UPS features a compact design for easy installation in offices or home setups. Finally, the LCD panel allows real-time monitoring of battery and load status. The BX2200MI-MS ensures uninterrupted operation and protects essential systems during power interruptions. manufacturer link Specifications: 1200W / 2200VA line-interactive output for reliable device protection Protects electronics from surges, spikes, and outages Compact design suitable for office or home setups LCD panel for monitoring battery and load status Ensures uninterrupted operation during power interruptions
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
The Beco GS3000 3000VA 1800W UPS delivers powerful backup power for demanding home, office, and business setups. It supports high-performance desktops, servers, and networking systems. This UPS helps prevent data loss and sudden shutdowns during power outages. Users enjoy dependable protection while working and gaming. Moreover, the Beco GS3000 3000VA 1800W UPS offers a strong 3000 VA capacity with 1800 W output power for heavy electrical loads. It keeps multiple devices powered longer during interruptions. This improves system stability and uptime. Reliability stays consistent under heavy use. In addition, the UPS features built-in surge protection for shielding electronics against voltage spikes. It guards your devices from electrical damage. This adds extra peace of mind during storms and unstable power. Protection remains strong and consistent. Furthermore, the Beco GS3000 3000VA 1800W UPS includes automatic voltage regulation to correct lows and highs. It balances voltage without manual input. As a result, connected systems receive steady power. This helps prolong device lifespan. Also, the UPS delivers reliable battery backup when electricity fails. You can save work and safely shut down devices before the battery runs out. This prevents data corruption and interruptions. Backup support feels dependable. In addition, the Beco GS3000 3000VA 1800W UPS includes clear LED indicators for easy status checks. You can monitor power and battery conditions at a glance. Monitoring becomes simple and intuitive. Users stay informed. Moreover, the UPS supports multiple output sockets for connecting many devices. This increases flexibility for busy workstations, servers, and media setups. You can protect key electronics with one unit. Furthermore, the Beco GS3000 3000VA 1800W UPS supports plug-and-play installation without complex steps. Setup is fast and stress-free for all users. Connections remain secure and organized. Also, the sturdy and compact design fits desks, shelves, and racks without taking much space. It blends well into office and home environments. Overall, the Beco GS3000 3000VA 1800W UPS delivers strong battery backup, surge protection, and steady voltage regulation. This UPS is ideal for users who need powerful and dependable power protection daily. Specifications: 3000VA, 1800W, LCD, Metal Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 9AH *4pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The Twist Line Interactive UPS 850VA TWUP850/LI provides backup power protection for computers, networking devices, and office electronics. It uses line interactive technology with automatic voltage regulation for stable power delivery. Additionally, the built-in 12V/7Ah battery supports continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear system monitoring. It also supports cold start functionality for startup without direct AC power. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits easily in home and office environments. The system also includes overload and short-circuit protection for safer daily operation. Additionally, the simulated sine wave output supports common desktop and networking equipment. Specifications: 850VA line interactive UPS technology Built-in 1x12V/7Ah rechargeable battery LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
The PROLINK PRO1501SFC Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and office electronics. It helps maintain device operation during power interruptions and unstable electrical conditions. The UPS provides a 1500VA capacity and uses line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps correct voltage fluctuations and provides stable power for connected equipment. The PROLINK PRO1501SFC features super-fast charging technology that reduces battery recharge time after power outages. Moreover, this allows the UPS to recover faster and become ready for future power interruptions. The UPS includes protection features against overload, short circuit, surge, and battery discharge. Furthermore, these safety functions help protect connected devices from common electrical issues. The PROLINK PRO1501SFC provides reliable backup support for homes, offices, and small work environments. Therefore, it is suitable for computers, routers, CCTV systems, and other essential electronic devices. The UPS features a practical design for easy installation and daily use. In addition, its line interactive operation provides efficient power management while maintaining equipment protection. The PROLINK PRO1501SFC Super Fast Charging UPS combines 1500VA backup capacity, AVR technology, fast charging, and protection features. As a result, it provides a dependable power solution for everyday electronic equipment. manufacturer link Specifications: Capacity: 1500VA / 900W Technology: Line Interactive UPS with AVR Charging: Super Fast Charging Technology Protection: Overload, Surge, Short Circuit, Battery Protection Application: Computer, Network, and Office Equipment Backup
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
The APC UPS Online Easy SRV 800W / 1 KVA SRV1KI delivers continuous, reliable power for critical equipment. First, it provides pure sine wave output suitable for sensitive electronics. In addition, it protects devices from phttps://mojitech.net/shop/peripherals/ups-battery-backup/apc-smart-ups-rc-800w-1kva-sine-wave-lebanon/ower surges, spikes, and outages. Moreover, the UPS features a compact design for easy installation in offices or server rooms. Finally, the intuitive LCD interface allows real-time monitoring of battery status and load. The SRV1KI ensures uninterrupted operation and safeguards essential systems during power disruptions. Specifications: 800W / 1 KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design suitable for offices and server rooms LCD interface for monitoring battery and load status Ensures uninterrupted operation during power disruptions
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
PCE EX Online 2 KVA 1800W is a double-conversion online UPS designed to deliver continuous and stable power protection for computers, servers, and sensitive electronic equipment. It ensures uninterrupted operation during outages and unstable voltage conditions. In addition, PCE EX Online 2 KVA 1800W uses true online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers a pure sine wave output for safe and stable power to connected devices. Furthermore, PCE EX Online 2 KVA 1800W supports a 2kVA / 1800W load capacity. As a result, it can handle multiple devices such as PCs, routers, and small servers. It also maintains stable voltage regulation for sensitive workloads. In addition, PCE EX Online 2 KVA 1800W includes advanced protection features. Therefore, it helps protect against overload, short circuits, and power fluctuations. Moreover, it is designed for consistent performance in professional and office environments. Overall, PCE EX Online 2 KVA 1800W delivers reliable, uninterrupted, and high-quality backup power for critical systems. Specifications: 2kVA / 1800W power capacity for multiple devices Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for safe device operation Protection against overload and voltage fluctuations
