APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The PROLINK IPS5003 Inverter is designed to provide reliable backup power for homes, offices, and essential electronic devices. It helps users maintain power during outages and supports stable operation for different electrical equipment. The inverter provides a 5000VA capacity and delivers stable AC power output for compatible devices. Additionally, it supports backup power needs for appliances, computers, and other important electronics. The PROLINK IPS5003 features pure sine wave output to provide clean power for sensitive equipment. Moreover, this technology helps improve compatibility with devices that require stable electricity performance. The inverter includes an LCD display that allows users to monitor important system information. Furthermore, users can check battery status, input voltage, output voltage, and operating conditions easily. The PROLINK IPS5003 includes protection features against overload, short circuit, over-temperature, and low battery conditions. Therefore, it helps protect connected devices and improves system safety during operation. The inverter supports different backup power applications for homes and small offices. In addition, its practical design makes it suitable for users who need dependable energy support during power interruptions. The PROLINK IPS5003 Inverter combines high power capacity, pure sine wave technology, monitoring features, and protection functions. As a result, it provides a reliable backup power solution for everyday electrical needs. manufacturer link Specifications: Capacity: 5000VA Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Low Battery Protection Application: Backup Power for Home and Office Equipment
Vertiv Emerson Liebert itON LI32121CT00 800VA
The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
APC UPS Accessories APV9601 EASY UPS ON-LINE SNMP CARD, 1 – 10KVA (SRV models)
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
The APC UPS 600W 1000VA Line Interactive BV1000I-GR provides reliable backup power for home and office devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected devices against surges, spikes, and short outages. Moreover, the compact design allows easy placement on desks or near electronics. Finally, the UPS includes LED indicators to monitor battery and load status. The BV1000I-GR ensures uninterrupted operation and protects important electronics during power interruptions. Specifications: 600W / 1000VA line-interactive output protects devices Safeguards against power surges, spikes, and outages Compact design for easy placement on desks or near electronics LED indicators monitor battery and load status Ensures uninterrupted operation during short power interruptions
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
The APC Smart-UPS RC 800W 1KVA Sine Wave SRC1KI provides reliable backup power for critical devices. First, it delivers pure sine wave output, ideal for sensitive electronics. In addition, the UPS protects connected equipment from power surges, spikes, and outages. Moreover, it features a compact design for easy placement in offices or server rooms. Finally, the unit includes an intuitive LCD interface for monitoring battery status and load. The SRC1KI ensures continuous operation and safeguards important systems during power interruptions. Specifications: 800W / 1KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design for office or server room placement LCD interface for monitoring battery and load status Ensures continuous operation during power interruptions
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
The Twist Online High Frequency UPS 2KVA TWUP2000/HF provides continuous backup power for servers, workstations, and networking equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It also features internal 4x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and power failures. Furthermore, the TWUP2000/HF supports pure sine wave output for sensitive electronics and professional equipment. It also includes overload, short-circuit, and surge protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 2KVA online double conversion UPS technology Internal 4x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure