Key Features Output Connections (1) IEC 60320 C19 Input Connections Schuko CEE 7 / EU1-16P Cord Length 8.2ft (2.5meters) Power Cord, C19 to CEE/7 Schuko, 2.5m Wide selection of Rack PDU power cords for a variety of IT equipment. Specifications : Output Overload Protection No Maximum Total Current Draw 16 Input Input frequency 50/60 Hz Acceptable Input Voltage 90 – 250VAC Number of Power Cords 1 Maximum Input Current 16A Maximum Line Current 16A Physical Net Weight 0.49lbs. (0.22KG) Shipping weight 0.66lbs. (0.3KG) Shipping Height 2.01inches (51MM, 5.1CM) Shipping Width 4.02inches (102MM, 10.2CM) Shipping Depth 7.99inches (203MM, 20.3CM) Color Black Environmental Operating Temperature 32 – 113 °F (0 – 45 °C) Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 10000ft (0 – 3048meters) Storage Temperature -25 – 65 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 50000ft (0 – 15240meters) manufacturer link
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The Twist Online High Frequency UPS 1KVA TWUP1000/HF delivers stable backup power for servers, networking devices, and office equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces switching interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system status updates. It also features built-in 2x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, surges, and power loss. Furthermore, the TWUP1000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits home, office, and IT environments easily. Specifications: 1KVA online double conversion UPS technology Built-in 2x12V/9Ah rechargeable batteries LCD display for system monitoring Pure sine wave output for stable power Overload and short-circuit protection system
The APC 1600VA BX1600MI 900W UPS provides reliable backup power for home and office electronics. First, it delivers line-interactive output to protect devices from voltage fluctuations. In addition, it safeguards connected equipment from surges, spikes, and short outages. Moreover, the compact design allows easy placement near computers or servers. Finally, the LCD indicators display battery and load status for real-time monitoring. The BX1600MI-GR ensures uninterrupted operation and reliable protection for critical devices. manufacturer link Specifications: 900W / 1600VA line-interactive output for reliable device protection Protects electronics from power surges, spikes, and outages Compact design for easy placement near computers or servers LCD indicators for monitoring battery and load status Ensures uninterrupted operation during power interruptions
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
The PCE EX Online 6 KVA 5400W is a high-capacity online UPS built for strong power protection in offices and business environments. This UPS delivers clean and stable electricity even during severe power issues. Moreover, its true double-conversion design removes surges, sags, and spikes for safe device operation. Therefore, it fits companies and users who need dependable backup without interruption. First, the PCE EX Online 6 KVA 5400W supplies pure sine wave output for sensitive electronics like servers, workstations, and networking gear. This helps protect your devices from damage and performance drops. In addition, the online design ensures seamless switching between mains and battery power. As a result, connected equipment stays powered without sudden shutdowns during outages. Next, this UPS supports a high load capacity for multiple systems at once. You can run large setups including computers, storage units, and critical machinery. Furthermore, advanced battery management maximizes runtime and extends battery health. This means longer backup support when power cuts last. Meanwhile, the LCD display shows real-time status, load, and battery info for easy monitoring. The durable build quality makes the unit reliable for daily heavy use and long operational hours. Additionally, installation and setup are quick, with minimal steps required. Consequently, you save time and avoid complex configurations. Also, the UPS includes advanced safety features to prevent overloads and short circuits for extra peace of mind. Smart communication options integrate with software for automatic shutdown and alert notifications. This keeps systems protected even when you are away. Moreover, the UPS runs quietly and remains cool under full load without noise disruption. Therefore, it fits well in busy workspaces without distraction. Overall, the PCE EX Online 6 KVA 5400W delivers seamless power backup, strong protection, and stable performance. It provides great value for users who need reliable power security for critical systems. Specifications: Voltage : 220V, 230V, or 240V Capacity :12v/7Ah Frequency:50/60 Hz
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
Specifications : Le grand ups keor spx 800va 310301 1year warranty ups 800va
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
Specifications : Le grand ups keor spx 600va 310300 UPS 600va
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
