Used OEM Original Apple Logic Board Working, A1706 Late 2017 Mode 3.3 GHz i7 256gb 16gb RAM Tested using latest industry hardware diagnostic software, Fresh pull from full unit.
Compatible With: MacBook Pro 15.4-inch (Mid 2012, Model A1398, Model Identifier MacBookPro10,1) — the first Retina MacBook Pro. Includes: Complete left and right speaker units with pre-attached connector cables and mounting brackets, ready for direct installation. Audio Performance: Engineered to match Apple’s original acoustic design—delivers clear mid-range, balanced stereo separation, and consistent volume levels across system audio, video calls, and media playback. OEM Build Quality: Precision-molded housing, original grille pattern, and correct wiring length ensure seamless integration into the MacBook’s chassis without rattling or interference. Common Use Cases: Replaces speakers damaged by liquid spills, physical impact, or aging (e.g., crackling, no sound, or distorted audio). Installation Note: Requires full bottom case and logic board access. Speakers are secured with screws and adhesive tape. Recommended for experienced technicians due to tight internal layout and delicate connectors.
Genuine-spec keyboard replacement for MacBook Air 13″ (Model A2179, 2020, Intel) — choose US QWERTY or UK QWERTY (with £ symbol). Features Apple’s reliable scissor-switch mechanism, backlighting, and OEM-fit design for seamless performance and aesthetics. Compatible With: MacBook Air 13-inch (2020, Model A2179, EMC 3597) with Intel Core i3/i5/i7 processors (non-M1). Layout Options (select at purchase): US Layout: Standard QWERTY with wide Enter key, @ above 2, # above 3, and full inverted-T arrow keys. UK Layout: QWERTY with £ symbol, tall vertical Enter key, @ accessed via right Alt, and UK-specific punctuation—matches Apple’s official UK regional configuration. US Layout: Standard QWERTY with wide Enter key, @ above 2, # above 3, and full inverted-T arrow keys. UK Layout: QWERTY with £ symbol, tall vertical Enter key, @ accessed via right Alt, and UK-specific punctuation—matches Apple’s official UK regional configuration. Keyboard Type: Traditional scissor-switch mechanism (not Butterfly, not Magic Keyboard)—robust, tactile, and serviceable, with good key travel and proven durability. Integrated Features: Full backlit keys for low-light use Ambient light sensor compatibility OEM-style ribbon cable pre-attached for direct logic board connection Full backlit keys for low-light use Ambient light sensor compatibility OEM-style ribbon cable pre-attached for direct logic board connection Precision Build: Molded to exact Apple specifications—ensures flush mounting, consistent key alignment, and seamless integration into the original top case. Installation Note: Keyboard is screw-mounted with light adhesive—more accessible than glued Butterfly/Magic keyboards. Requires top case access and battery disconnect. Suitable for intermediate DIYers or professional technicians. Important: This is keyboard only—does not include the top case, battery, trackpad, or logic board. Not compatible with M1 MacBook Air (A2337/A2338) or M2 models (A2681/A2941). This is keyboard only—does not include the top case, battery, trackpad, or logic board. Not compatible with M1 MacBook Air (A2337/A2338) or M2 models (A2681/A2941). Model Verification: Confirm your device is MacBook Air A2179 (13″, Intel, 2020) via > About This Mac > Model Identifier (e.g., MacBookAir9,1).
Genuine-spec US layout keyboard replacement for MacBook Air 13″ (Model A2338, 2020)—featuring Apple’s reliable Magic Keyboard with scissor-switch mechanism, backlighting, and full OEM fit for seamless repair. Compatible With: MacBook Air 13-inch (2020, Model A2338) – includes both Intel Core i3/i5/i7 and M1 chip variants. Keyboard Type: Apple’s Magic Keyboard with scissor-switch mechanism—offering improved durability, quieter typing, and 1mm key travel compared to older Butterfly keyboards. Layout: Standard US English (QWERTY), with full-size keys, inverted-T arrow keys, and dedicated function row. Integrated Features: Backlit keys for low-light use, ambient light sensor compatibility, and original-style ribbon cable connector for direct logic board connection. Precision Fit: Engineered to match Apple’s exact dimensions and mounting points—ensures flush alignment within the original top case. Installation Note: The keyboard is adhered to the top case and requires careful removal and re-gluing. Full disassembly is needed. Recommended for skilled technicians or professional repair centers.
Original 13.3-inch LCD display assembly for MacBook Air A1466, pulled from a working unit. OEM, drop-in replacement for cracked or nonfunctional screens—ideal for restoring perfect visuals. This is a genuine Apple LCD display assembly for the MacBook Air model A1466 (mid-2013 to ~2017). It was removed from a working machine (“pulled”) and tested. It’s intended to replace failed, cracked, or damaged screens with an OEM original part. Key Features & Functionality Factory original LCD panel with LED backlight Includes glass, mounting frame, hinges, display cable Calibrated by Apple for color accuracy, brightness, contrast Tested for display quality, backlight uniformity, dead or stuck pixels Fits directly in A1466 models with correct alignment and cable interface Specifications Important Notes & Caveats Must ensure your MacBook is A1466 — wrong model = mismatch in frame, mounting, cable. As a used component, there may be light cosmetic wear or micro-scratches. Always test before full installation (connect the cable, boot, check display and backlight). Be careful handling: glass is fragile and the flex cable is delicate. Alignment and screw placement are critical — incorrect installation can damage the new screen.
MacBook Pro Retina 13' Early 2015 A1502 i5 8GB Logic Board MacBook Pro Retina 13′ Early 2015 A1502 i5 8GB Logic Board
Genuine-spec touchpad flex cable for MacBook Pro 13″ (Model A1502, Mid 2014)—restores full trackpad functionality, including precise cursor control and physical click response. Essential for repairing unresponsive or erratic trackpad behavior. Compatible With: MacBook Pro 13-inch (Mid 2014, Model A1502, Model Identifier MacBookPro11,1) with Intel Core i5/i7 processors and Retina display. Part Type: Touchpad flex cable only — does not include the trackpad housing, button mechanism, or mounting hardware. This is the ribbon cable that connects the trackpad to the logic board. Function: Transmits cursor movement and click signals (left/right physical clicks) Supports standard multi-touch gestures (two-finger scroll, tap-to-click, pinch-to-zoom) ⚠️ Note: This model uses a physical click mechanism—not Force Touch (no haptic feedback or pressure sensitivity). Transmits cursor movement and click signals (left/right physical clicks) Supports standard multi-touch gestures (two-finger scroll, tap-to-click, pinch-to-zoom) ⚠️ Note: This model uses a physical click mechanism—not Force Touch (no haptic feedback or pressure sensitivity). OEM-Quality Build: Matches Apple’s original in: Cable length and routing path Connector type and pin alignment Insulation and flexibility for long-term reliability Cable length and routing path Connector type and pin alignment Insulation and flexibility for long-term reliability Common Use Cases: Replacing a torn, frayed, or corroded original flex cable Fixing: Unresponsive or intermittent trackpad Cursor jumping or drifting Click function failure (left or right) Complete trackpad disconnect Replacing a torn, frayed, or corroded original flex cable Fixing: Unresponsive or intermittent trackpad Cursor jumping or drifting Click function failure (left or right) Complete trackpad disconnect Unresponsive or intermittent trackpad Cursor jumping or drifting Click function failure (left or right) Complete trackpad disconnect Installation Note: Requires bottom case removal and battery disconnect. Connects via a ZIF (Zero Insertion Force) socket on the logic board—do not force. Cable routes under the battery; handle with care to avoid strain. Suitable for intermediate to advanced DIYers or technicians. Requires bottom case removal and battery disconnect. Connects via a ZIF (Zero Insertion Force) socket on the logic board—do not force. Cable routes under the battery; handle with care to avoid strain. Suitable for intermediate to advanced DIYers or technicians.
Genuine Apple sleep/wake sensor flex cable (Hall effect sensor) for MacBook Air 13.6″ (Model A2681, 2022, M2)—ensures automatic display sleep when the lid is closed and wake-on-open functionality. OEM part number 821-04129-02. Compatible With: MacBook Air 13.6-inch (2022, Model A2681) with Apple M2 chip (all colors: Silver, Space Gray, Starlight, Midnight). Apple Part Number: 821-04129-02 (exact OEM service part). Function: Contains the Hall effect sensor that detects the magnet in the MacBook Air’s display lid. This allows macOS to: Sleep the system when the lid is closed Wake instantly when opened Prevent false sleep/wake events during use Sleep the system when the lid is closed Wake instantly when opened Prevent false sleep/wake events during use Location: Mounted near the right side of the keyboard, adjacent to the battery and logic board. Common Failure Symptoms: MacBook doesn’t sleep when lid is closed MacBook wakes randomly in a bag “Lid closed” not recognized in macOS Requires manual sleep or power button use MacBook doesn’t sleep when lid is closed MacBook wakes randomly in a bag “Lid closed” not recognized in macOS Requires manual sleep or power button use Part Type: Flex cable with integrated Hall sensor—not just a cable, but a calibrated magnetic sensor module. Installation Note: Requires full bottom case removal and careful disconnection of the battery. The sensor is adhered near the I/O area—do not bend or puncture. Recommended for experienced technicians.
Genuine-spec touchpad flex cable for Apple’s 12-inch MacBook (Model A1534, Early 2015 / Early 2016 / Mid 2017)—essential for restoring full Force Touch trackpad functionality, haptic feedback, and multi-touch gesture support. Compatible With: MacBook 12″ (Early 2015) – 1.1GHz Core M MacBook 12″ (Early 2016) – 1.1GHz/1.3GHz Core M MacBook 12″ (Mid 2017) – 1.2GHz/1.3GHz Core m3/i5/i7 All share Model Number A1534 and Model Identifier MacBook8,1 / MacBook9,1 / MacBook10,1 respectively. MacBook 12″ (Early 2015) – 1.1GHz Core M MacBook 12″ (Early 2016) – 1.1GHz/1.3GHz Core M MacBook 12″ (Mid 2017) – 1.2GHz/1.3GHz Core m3/i5/i7 All share Model Number A1534 and Model Identifier MacBook8,1 / MacBook9,1 / MacBook10,1 respectively. Part Type: Touchpad flex cable only—does not include the trackpad housing, Taptic Engine, or mounting brackets. This is the ribbon cable that connects the Force Touch trackpad to the logic board. Function: Critical for Force Touch functionality—transmits pressure-sensitive input, multi-touch gestures (e.g., pinch, swipe, Force Click), and haptic feedback signals to the Taptic Engine. OEM-Quality Construction: Precisely matches Apple’s original in length, connector pitch, shielding, and routing—ensures reliable signal integrity and compatibility with macOS. Common Use Cases: Replacing a torn, creased, or liquid-damaged flex cable Restoring unresponsive or erratic trackpad behavior Completing a trackpad replacement when the original cable is unusable Replacing a torn, creased, or liquid-damaged flex cable Restoring unresponsive or erratic trackpad behavior Completing a trackpad replacement when the original cable is unusable Installation Note: Requires full bottom case removal and delicate disconnection of the ZIF connector. The cable routes tightly under the battery—extreme care is required. Recommended for experienced or certified technicians only.
Genuine-spec touchpad flex cable for MacBook Pro 15″ (Model A1707, 2016–2017)—restores full Force Touch functionality, haptic feedback, and precise multi-touch gesture control during trackpad repair or replacement. Compatible With: MacBook Pro 15″ (2016) – Model A1707 (Model Identifier: MacBookPro13,2) MacBook Pro 15″ (2017) – Model A1707 (Model Identifier: MacBookPro14,2) MacBook Pro 15″ (2016) – Model A1707 (Model Identifier: MacBookPro13,2) MacBook Pro 15″ (2017) – Model A1707 (Model Identifier: MacBookPro14,2) Part Type: Touchpad flex cable only — does not include the trackpad housing, Taptic Engine, or mounting hardware. This is the OEM-style ribbon cable that connects the trackpad to the logic board. Function: Transmits: Touch input coordinates Force Touch pressure data Haptic feedback signals to the Taptic Engine Enables full macOS gesture support: Force Click, three-finger lookup, swipe navigation, pinch-to-zoom, and smooth cursor tracking. Touch input coordinates Force Touch pressure data Haptic feedback signals to the Taptic Engine Enables full macOS gesture support: Force Click, three-finger lookup, swipe navigation, pinch-to-zoom, and smooth cursor tracking. OEM-Quality Build: Matches Apple’s original specifications in: Cable length and routing path Connector pitch and ZIF latch design EMI shielding and flex durability Cable length and routing path Connector pitch and ZIF latch design EMI shielding and flex durability Common Use Cases: Replacing a torn, creased, or liquid-damaged original flex cable Completing a trackpad replacement when the original cable is compromised Fixing intermittent trackpad behavior, loss of Force Touch, or complete unresponsiveness Replacing a torn, creased, or liquid-damaged original flex cable Completing a trackpad replacement when the original cable is compromised Fixing intermittent trackpad behavior, loss of Force Touch, or complete unresponsiveness Installation Note: Requires full bottom case removal and battery disconnection. Cable routes under internal components near the right speaker and logic board. Connects via a ZIF (Zero Insertion Force) socket—must be aligned carefully and latched gently. Recommended for experienced or certified technicians only. Requires full bottom case removal and battery disconnection. Cable routes under internal components near the right speaker and logic board. Connects via a ZIF (Zero Insertion Force) socket—must be aligned carefully and latched gently. Recommended for experienced or certified technicians only.
If you’re in search of reliable storage solutions, look no further than Western Digital WD20EFAX Red NAS 3.5″ SATA drives. These drives are tailored to meet the unique demands of network-attached storage (NAS) systems. Firstly, these drives are designed with NAS environments in mind, providing seamless integration and optimal performance for home and small business setups. Upgrade your storage capacity effortlessly with Western Digital Red. Transitioning between various tasks is smooth, thanks to the SATA interface. This ensures quick and efficient data transfers, making these drives ideal for both personal and professional applications. One of the standout features is the drive’s compatibility with 24/7 operation, ensuring constant accessibility to your stored data. Experience peace of mind knowing your files are secure and accessible whenever you need them. Western Digital Red NAS drives come equipped with advanced technology to minimize the impact of vibrations and noise. This not only enhances performance but also contributes to a quieter and more efficient NAS system. Additionally, the 3.5″ form factor allows for higher storage capacities, accommodating the growing needs of your data. With Western Digital WD20EFAX Red, you can easily expand your NAS setup without compromising on reliability. In conclusion, when it comes to optimizing your NAS storage, Western Digital Red NAS 3.5″ SATA drives are the ideal choice. Experience enhanced performance, reliability, and seamless integration for your storage needs. Upgrade your NAS setup today! Specifications: Capacity : 2TB Cache Size : 512MB Disk Speed : 7200RPM Part Number : WD20EFAX
Fantech Vigil MP806 Gaming Mousepad Large Size is an extra-large mousepad designed for gaming and office use, offering a wide and stable surface for accurate mouse control. It uses a smooth fabric top layer that ensures consistent tracking for both fast and precise movements, making it suitable for FPS, MOBA, and daily productivity tasks. The mousepad features an anti-slip rubber base that keeps it firmly in place during intense gameplay or heavy desktop use. Therefore, it reduces unwanted movement and helps maintain stable aim and cursor control. Its extended size (approximately 800 × 300 mm) provides a full desk-style layout, giving enough space for both keyboard and mouse. In addition, the large surface helps users with low sensitivity settings achieve smoother and more controlled movement. The stitched anti-fray edges improve durability by preventing surface peeling over time. Moreover, the reinforced border helps the mousepad maintain shape and performance even after long-term use. Overall, it focuses on stability, durability, and wide desk coverage for gamers and office users who need consistent performance. Specifications: Extra-large 800 × 300 mm surface Smooth fabric tracking control surface Anti-slip rubber base grip Stitched anti-fray edges Stable full-desk layout for gaming and office use
Are you looking to enhance your computer’s speed without breaking the bank? Discover the Western Digital SATA Green 480GB SSD – an affordable solution to supercharge your PC. To begin, this SSD offers a smooth and quick data transfer experience. Say goodbye to sluggish load times and hello to a more responsive system for your daily tasks and applications. Installation is a breeze – simply replace your existing hard drive with the Western Digital SATA Green SSD. Its user-friendly design ensures a hassle-free upgrade, even for those with minimal technical expertise. Experience improved energy efficiency with this SSD. The Western Digital Green series is known for its low power consumption, contributing to both a faster system and energy savings, making it an eco-friendly choice. The durability of the Western Digital SATA Green SSD is another highlight. Solid-state technology means no moving parts, reducing the risk of damage from physical shocks and providing a reliable storage solution for your valuable data. Enjoy ample storage space without compromise. With a capacity of 480GB, you have room for your operating system, applications, and important files, ensuring a seamless computing experience. In summary, the Western Digital SATA Green 480GB SSD offers an affordable and efficient way to enhance your computer’s performance. Upgrade today and experience the benefits of faster speeds and reliable storage. Specifications: Read : 545MB/s Write : 465MB/s Part Number : WDS480G3G0A
Transcend 240GB SSD Sata3 The Transcend 240GB SSD Sata3 6Gb/s SSD220S uses the latest 3D NAND. technology that features vertical, stacked expansion of storage cells. By using high-quality flash memory and enhanced firmware algorithms. the SSD220S delivers greater performance and reliability. 3D expansion to break through limits Unlike planar NAND memory, 3D NAND flash features memory cells stacked vertically in multiple layers. 3D NAND overcomes density limitations of 2D planar NAND, and delivers a higher level of performance and endurance. Performance boost for everyday computing Taking full advantage of the SATA III 6Gb/s interface and built-in SLC caching technology. Transcend’s SSD220S achieves exceptional transfer speeds of up to 550MB/s read and 500MB/s write. RAID engine and LDPC coding Detects and corrects transfer errors to prevent data corruption in TLC-based SSD products Garbage Collection Relocates existing data to release memory blocks Wear-leveling Distributes data evenly across memory cells to prolong SSD’s lifespan DevSleep Intelligently shuts down SATA interface when not in use to prolong device’s battery life A better choice than HDD Solid-state drives dominate the market for PC upgrades because they are faster and lighter than hard disk drives . SSDs also feature less power, create less noise when in operation, and are more shock-resistant than traditional hard drives. SSD Scope software Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD. remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive. Guaranteed quality Transcend’s solid state drives are built to the highest standards and rigorously tested, and offer outstanding quality, performance, and reliability. New era. New performance. 2.5″ SSDs SATA III 6Gb/s SSD220S Flash Type 3D NAND flash Capacity 120 GB/ 240 GB/ 480 GB/ 960 GB Operating Environment Operating Temperature 0°C (32°F) ~ 70°C (158°F) Operating Voltage 5V±5% Performance Sequential Read/Write (CrystalDiskMark) 960 GB up to 550/500 MB/s 480 GB up to 530/480 MB/s 240 GB up to 500/330 MB/s 120 GB up to 500/300 MB/s 4K Random Read/Write (IOmeter) 960 GB up to 55,000/72,000 IOPS 480 GB up to 55,000/75,000 IOPS 240 GB up to 40,000/75,000 IOPS 120 GB up to 28,000/75,000 IOPS Terabytes Written (TBW) 960 GB 320 TBW 480 GB 160 TBW 240 GB 80 TBW 120 GB 40 TBW Specifications: Specifications Flash Type 3D NAND flash Capacity 120 GB/ 240 GB/ 480 GB/ 960 GB Operating Environment Operating Temperature 0°C (32°F) ~ 70°C (158°F) Operating Voltage 5V±5% Performance Sequential Read/Write (CrystalDiskMark) 960 GB up to 550/500 MB/s 480 GB up to 530/480 MB/s 240 GB up to 500/330 MB/s 120 GB up to 500/300 MB/s 2-year warranty Manufacturer Link
SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB provides expanded storage for Nintendo Switch systems. It allows users to store downloaded games, updates, screenshots, and gameplay videos in one compact card. It supports reliable performance for everyday gaming use. In addition, SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB delivers fast transfer speeds of up to 100MB/s in compatible devices. Therefore, it helps reduce loading and transfer time when used with a UHS-I card reader. Moreover, it ensures stable performance for game data storage and access. Furthermore, this card is designed and tested for Nintendo Switch compatibility. As a result, it works smoothly with Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch OLED models. It also supports UHS-I standards for consistent read performance. Overall, SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB offers dependable storage expansion for gaming libraries and digital content management. Specifications: 128GB storage capacity for games, saves, and media Up to 100MB/s read speed in compatible devices UHS-I interface for stable performance Designed and tested for Nintendo Switch systems Supports Nintendo Switch, Switch Lite, and OLED models
The HyperX Pulsefire Core Gaming Mouse HX-MC004B (4P4F8AA) is designed for gamers who want reliable wired performance and accurate control. It delivers consistent tracking and stable input, making it suitable for FPS, MOBA, and everyday gaming use. It uses a wired USB connection for direct and stable responsiveness. Therefore, it provides zero-latency input for competitive gameplay. In addition, it features a Pixart optical sensor that delivers precise tracking for smooth and accurate cursor movement. Moreover, the mouse includes an ergonomic symmetrical design that supports comfortable use for both palm and claw grip styles. As a result, users can play for long sessions with reduced hand fatigue. The textured side grips improve stability and control during fast movements. It includes programmable buttons that allow customization for in-game commands and shortcuts. Furthermore, the durable switches are designed for long-term use with consistent click performance. The PTFE feet ensure smooth glide across most mousepad surfaces. Finally, the HyperX Pulsefire Core Gaming Mouse offers solid build quality, accurate tracking, and dependable wired performance for everyday and competitive gaming. Specifications: Connectivity: Wired USB connection Sensor: Pixart optical sensor Buttons: 7 programmable buttons Design: Symmetrical ergonomic shape Feet: PTFE glide skates
The Microsoft Surface Arc Mouse is a sleek and innovative tool designed for modern users. Its unique design makes it a perfect match for your Surface devices. Lightweight and portable, it’s ideal for on-the-go productivity. This wireless mouse features a slim and curved design, allowing it to fit comfortably in your hand. You can easily snap it flat for storage and portability. The smooth surface ensures effortless navigation, making it perfect for long hours of work or browsing. Setting up the Microsoft Surface Arc Mouse is quick and simple. Connect it via Bluetooth without the need for dongles or wires. It pairs seamlessly with Surface devices and other Bluetooth-enabled systems. The Arc Mouse provides precise tracking on almost any surface. Whether you’re working at a desk or on a soft couch, you’ll enjoy reliable performance. The mouse is designed to be ambidextrous, making it suitable for both right- and left-handed users. Another standout feature is its long-lasting battery life. You can work for weeks on a single set of batteries, minimizing interruptions. The minimalist design and variety of color options let you choose a style that suits you. With the Microsoft Surface Arc Mouse, you get both form and function. Its modern design complements your workspace while providing unmatched convenience. Whether for work or travel, it’s the perfect accessory to boost productivity. Specifications: Interface : Bluetooth 4.1 Wireless Frequency : 2.4GHz Buttons : 2 Design : Bendable Tail Battery : 2 AAA (Included)
Are you longing for a faster and more responsive computer without splurging on a new system? The Transcend SATA III 6Gb/s SSD 1TB is the solution you’ve been searching for. To start, installing the Transcend SSD is a breeze. Its user-friendly design ensures a hassle-free upgrade process. You’ll experience a noticeable boost in your system’s speed without the complexities. Say goodbye to slow boot times. The Transcend SSD significantly reduces loading times, allowing your computer to start up swiftly and efficiently. Experience a seamless transition from power-on to productivity. Transcend’s SATA III 6Gb/s technology ensures lightning-fast data transfer rates. Your files and applications load quickly, enhancing overall performance. Enjoy a smoother computing experience for both work and play. Also with its compact form factor, the Transcend SSD fits seamlessly into your existing setup. Its compatibility with various devices makes it a versatile choice for upgrading laptops and desktops alike. The durability of the Transcend SSD guarantees long-lasting performance. Say farewell to the mechanical limitations of traditional hard drives, as this SSD operates silently, with no moving parts, ensuring reliability over time. In conclusion, the Transcend SATA III 6Gb/s SSD 1TB is your ticket to an enhanced computing experience. Upgrade effortlessly and revel in the improved speed, responsiveness, and reliability of your PC. Elevate your digital journey today! Specifications: Capacity : 1TB Read : 550MB/s Write : 500MB/s Part Number : TS1TSSD225S
Specifications : Solid State Capacity 2 TB Drive Size M.2 2280 Memory Type SSD Memory Package 3D TLC Memory Size 2 TB Performance Read Speed Up to 7,000 MB/s Write Speed Up to 7,000 MB/s 4K Random Read (AS SSD) Up to 1mil IOPS 4K Random Write (AS SSD) Up to 1mil IOPS Data Storage Life Up to 1.6 PBW Interfaces/Ports Interface Type PCIe Gen4 x4 NVMe System Requirements System Requirements 1 x M.2-2280 slot with PCIe Gen4 NVMe support Electrical Electrical Power Consumption Up to 9.9 W Electrical Power Consumption Standby 5 mW Environmental Operating Temperature 0 ~ 70 °C Storage Temperature -40 ~ +85 &Deg;C Vibration (Operating) 2.17 G Vibration (Non-Operating) 20 G Physical Form Factor Solid State Drive Enclosure type Internal Case Colour Black In The Box 1 x 2TB SSD Width 22 mm Depth 80 mm Height 3.5 mm Weight 9.7 g Warranty Warranty 5 Years
Elevate your game with the Logitech G102, featuring a high-precision 8,000 DPI sensor and vibrant Lightsync RGB lighting. Designed with a classic six-button layout and gaming-grade performance, it offers incredible accuracy and responsiveness for both competitive play and daily productivity. The Logitech G102 is engineered for speed, consistency, and comfort. At its core is a gaming-grade sensor that provides adjustable sensitivity, allowing you to tailor your control to your specific playstyle. Whether you are navigating complex spreadsheets or hitting precise headshots, the G102 delivers a seamless experience with a classic design trusted by gamers worldwide. Gaming-Grade 8,000 DPI Sensor: Experience ultra-precise tracking and consistent responsiveness. The sensitivity is fully adjustable from 200 to 8,000 DPI. Lightsync RGB Color Wave: Choose from vibrant animations or customize your own from approximately 16.8 million colors to match your setup’s aesthetic. Mechanical Spring Button Tensioning: The primary left and right buttons feature a metal spring tensioning system, providing crisp, reliable clicks and a premium feel. Classic 6-Button Design: A familiar, comfortable shape that allows you to play or work for hours without fatigue. Each button can be customized via software for specific in-game actions. On-the-Fly DPI Shifting: Cycle through up to five sensitivity settings with the press of a button, allowing you to switch from precision sniping to rapid movement instantly. Resolution: 200 – 8,000 DPI Connection Type: USB 2.0 (Wired) USB Data Format: 16 bits/axis USB Report Rate: 1000Hz (1ms) Microprocessor: 32-bit ARM Cable Length: 2.1 meters Compatibility: Windows 7 or later, macOS 10.13 or later, ChromeOS Logitech G102 Gaming Mouse User Documentation
Logitech G403 HERO – Ergonomic wired gaming mouse with HERO 25K sensor and ultra-precise 25,600 DPI tracking.Delivers pro-grade performance with customizable RGB, 6 buttons, and optional weight tuning. ✅ Full Specifications: Model: Logitech G403 HERO Sensor: HERO 25K Optical Sensor DPI: 100 – 25,600 DPI (adjustable with no smoothing, acceleration, or filtering) Polling Rate: 1000 Hz (1ms response time) Tracking Speed: >400 IPS Acceleration: >40G Buttons: 6 programmable buttons (including 2 side buttons) Switches: Mechanical with metal spring button tensioning (rated for 20M+ clicks) Lighting: RGB Lighting (logo and scroll wheel, customizable via G HUB) Weight: Approx. 87g (mouse only) + 10g optional weight Grip Style: Palm and claw grip support Cable: 2.1 meters (standard rubber cable) Build: Ergonomic right-handed design with rubber side grips Software: Logitech G HUB (for DPI, lighting, macros, and profiles) Compatibility: Windows 7 or later, macOS 10.11 or later, Chrome OS Onboard Memory: Yes (save DPI and button settings directly to the mouse)
The Promate CM-1200 Ergonomic Design Wired Optical Mouse is built for smooth and precise performance. It offers comfort and accuracy for daily tasks. Whether for work or gaming, this wired mouse ensures seamless operation. Firstly its ergonomic design reduces hand fatigue, making it ideal for extended use. The comfortable grip allows for natural hand positioning. This helps prevent strain, even after long hours of use. Furthermore the Promate CM-1200 features a high-resolution optical sensor for accurate tracking. It provides smooth cursor movement on different surfaces. This makes it perfect for office work, graphic design, and casual gaming. Moreover with a plug-and-play USB connection, this wired mouse is easy to set up. Just connect it to a laptop or PC, and it works instantly. No additional software or drivers are needed. Also the durable buttons ensure long-lasting performance. They are tested for millions of clicks, providing reliability for daily use. The scroll wheel is responsive, making navigation smooth and effortless. This wired optical mouse is lightweight and compact. It fits easily in any workspace and is convenient for travel. Whether at home, in the office, or on the go, it delivers a hassle-free experience. Finally the Promate CM-1200 Ergonomic Design Wired Optical Mouse is compatible with Windows, Mac, and Linux systems. It works with most devices, making it a versatile choice for different users. In conclusion, this ergonomic wired mouse is designed for precision, durability, and comfort. It is a great choice for professionals, students, and everyday users. Specifications: Cable Length : 1.5m Mouse Sensor : 1200DPI
The Razer Cynosa Lite Keyboard and Abyssus Lite Mouse Bundle is the ultimate set for gamers looking for reliability and performance. This bundle combines a high-quality keyboard and mouse designed for seamless gameplay and comfort. Whether you’re a casual gamer or a competitive player, this combo is perfect for enhancing your gaming experience. Firstly the Razer Cynosa Lite Keyboard features membrane switches that provide a soft, quiet typing experience. With its customizable RGB Chroma backlighting, you can personalize the look of your setup. It also includes dedicated media controls, allowing you to adjust audio or pause music without interrupting your game. Furthermore the Abyssus Lite Mouse is equipped with a 2000 DPI optical sensor, offering precise and responsive tracking. This makes it ideal for both fast-paced games and precise movements. Its ergonomic design ensures a comfortable grip, allowing for hours of uninterrupted gaming without discomfort. Moreover setting up the Razer Cynosa Lite Keyboard and Abyssus Lite Mouse Bundle is easy. Simply plug in and start playing—no complex installation needed. The bundle is compatible with both PC and Mac, so you can use it with various devices. This combo is built to last, with durable materials designed to withstand intense gaming sessions. The keyboard features anti-ghosting technology, ensuring that multiple key presses are registered simultaneously. The mouse is designed for speed and accuracy, giving you the competitive edge. Elevate your gaming setup with the Razer Cynosa Lite Keyboard and Abyssus Lite Mouse Bundle. It’s the perfect balance of performance, style, and comfort. Specifications: Keyboard Gaming Grade Keys Fully Programmable Keys Single Zone Lighting Powered By Razer Chroma Mouse 6400 DPI Optical Sensor Ambidextrous Form Single Zone Lighting Powered By Razer Chroma
The HyperX Pulsefire Saga Gaming Mouse is a highly customizable device designed to enhance your gaming experience. Its ergonomic design and interchangeable components allow for up to 16 comfortable combinations, adapting seamlessly to various grip styles. Firstly weighing just 69 grams, the Pulsefire Saga ensures swift and precise movements during intense gaming sessions. It features a 26K optical sensor, offering a maximum DPI of 26,000 for exceptional accuracy. The mouse also boasts a maximum speed of 650 inches per second (IPS) and can handle up to 50Gs of acceleration, ensuring reliable tracking during rapid movements. Furthermore with an 8,000Hz polling rate, the Pulsefire Saga provides ultra-responsive performance, capturing every click and movement with precision. The magnetically mounted parts can be swapped out without tools, allowing users to find their perfect fit effortlessly. Moreover the mouse is compatible with PCs, Xbox Series X/S, and PS5, offering versatility across different gaming platforms. Its modular design not only caters to personal comfort but also enhances overall gameplay by providing tailored ergonomics. In summary, the HyperX Pulsefire Saga Gaming Mouse combines lightweight design, high precision, and extensive customization options, making it a valuable asset for gamers seeking performance and comfort. Specifications: Sensor : HyperX 26K Resolution : 26000DPI Buttons : 6 Lighting : LED RGB Lighting Connection : Wired USB Type-A Polling Rate : Up to 8000Hz
The HyperX Pulsefire Haste 2 Core Wireless Gaming Mouse 8R2E6AA is built for gamers who need speed, precision, and wireless freedom. It delivers responsive tracking and a lightweight design that supports fast movements in competitive gameplay. It features a wireless connection that reduces cable drag and improves movement control. Therefore, players can react faster during intense gaming sessions. In addition, the high-precision sensor ensures accurate tracking for FPS, MOBA, and general gaming use. Moreover, the lightweight shell design helps reduce hand fatigue during long gaming sessions. As a result, users can maintain better control and comfort over extended playtime. The ergonomic shape supports natural hand positioning for improved accuracy and reduced strain. The mouse includes customizable buttons that allow quick access to in-game actions or shortcuts. Furthermore, it improves efficiency for both casual and competitive players. The durable build quality ensures long-term reliability, even under heavy daily use. Finally, the HyperX Pulsefire Haste 2 Core Wireless Gaming Mouse combines speed, comfort, and wireless performance, making it a strong choice for gamers who want consistent accuracy and responsive control. Specifications: Connectivity: 2.4GHz wireless USB receiver Sensor: Pixart 12,000 DPI optical sensor Buttons: 6 programmable buttons Design: Lightweight shell with PTFE skates Power: Single AA battery support
