Hardware Specifications Interfaces LAN 2 x 10/100/1000BASE-T RJ45 port Auto-negotiation and auto MDI/MDI-X Antennas Gain: 4 x Internal 4dBi antenna (2.4G x2, 5G x2) Reset Button Reset button on the rear side (Press over 5 seconds to reset the device to factory default) LED Indicators Power, SYS Dimensions (W x D x H) 186 x 186 x 35.8 mm Weight 380 ± 5g Power Requirements 48V DC IN, 0.5A, IEEE 802.3at PoE+ (WAN/PoE were changed port) 12V DC IN, 2.0A from DC Jack (5.5 x 2.1mm) Power Consumption < 15W Mounting Ceiling Mount Wireless Interface Specifications Standard IEEE 802.11ax IEEE 802.11ac IEEE 802.11n IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11i IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3x flow control IEEE 802.11k, 802.11v, and 802.11r Media Access Control CSMA/CA Data Modulation 802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM) 802.11ac: MIMO-OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM) 802.11b: DSSS (DBPSK / DQPSK / CCK) Band Mode 2.4GHz / 5GHz concurrent mode Frequency Range 2.4GHz: FCC: 2.412~2.462GHz ETSI: 2.412~2.472GHz 5GHz: FCC: 5.180~5.240GHz, 5.745~5.825GHz ETSI: 5.180~5.700GHz Operating Channels ETSI: 2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 (13 Channels) 5GHz: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,124,128,132, 136, 140 (19 Channels) FCC: 2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 (11 Channels) 5GHz: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,120,124,128,132, 136, 140, 149, 153, 157,161,165 (24Channels) 5GHz channel list may vary in different countries according to their regulations. Max. Transmit Power (dBm) FCC: up to 20 ± 1dBm ETSI: < 19dBm (EIRP) Receive Sensitivity Software Features LAN Static IP / *Dynamic IP WAN Static IP Dynamic IP PPPoE/PPTP/L2TP Wireless Mode Access Point Gateway Repeater Channel Width 20MHz, 40MHz, 80MHz Encryption Security WPA3 Personal, WPA2/WPA3 Personal, WPA2 Personal (AES), WPA2 Personal (TKIP), WPA2 Personal (TKIP+AES), WPA/WPA2 Personal (AES), WPA/WPA2 Personal (TKIP), WPA/WPA2 Personal (TKIP+AES), WPA2 Enterprise, WPA/WPA2 Enterprise Wireless Security Enable/Disable SSID Broadcast Wireless Max. 32 MAC address filtering User Isolation Max. SSIDs 8 (4 per radio) Max. Clients 150 (100 is suggested, depending on usage) Wireless QoS Supports Wi-Fi Multimedia (WMM) Wireless Advanced Auto Channel Selection 5-level Transmit Power Control Max (100%), Efficient (75%), Enhanced (50%), Standard (25%) or Min (15%) Client Limit Control, Coverage Threshold *Wi-Fi channel analysis chart Seamless Roaming Beamforming BSS Coloring Status Monitoring Device status, wireless client List PLANET Smart Discovery *DHCP client table System Log supports remote syslog server VLAN *IEEE 802.1Q VLAN (VID: 1~4094) *SSID-to-VLAN mapping to up to 4 SSIDs Self-healing Supports auto reboot settings per day/hour Management Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through Supports Captive Portal, RADIUS Server/Client Central Management Applicable controllers: NMS-500, NMS-1000V, *PLANET CloudViewer Environment & Certification Temperature Operating: -20~ 55 degrees C Storage: -40 ~ 70 degrees C Humidity Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) Regulatory CE, RoHS Remarks [*]: The feature will be supported through firmware/system upgrade. 1 Year Warranty manufacturer link
The Ruijie Reyee RG‑ES08G‑L 8‑Port 10/100/1000 Mbps Unmanaged Non‑PoE Switch upgrades your home or office network. It supports eight gigabit Ethernet ports for fast and stable connections. Moreover, the switch is fully plug‑and‑play, so setup takes no time. Also, its compact and sleek design fits any desk or shelf. In addition, the fanless build ensures whisper‑quiet operation. Besides that, energy‑efficient tech reduces power usage and saves money. Furthermore, it supports auto‑negotiation and auto MDI/MDIX to prevent cable mismatches. Therefore, the switch works with most Ethernet cables without fuss. It offers non‑blocking switching architecture for smooth and reliable data flow. Also, the 8 K MAC address table handles multiple devices easily. Plus, it uses an external 12 V DC adapter for simple power needs. Meanwhile, the metal case improves durability and helps with heat dispersion. Importantly, this switch runs quietly with no moving parts. Also, it operates from 0 °C to 45 °C for steady performance. Moreover, it weighs just around 200 g, making it easy to move or mount. Unlike managed switches, it needs no software or firmware updates. However, it can still show up in Ruijie Cloud with other managed switches. This feature gives basic monitoring and network visibility when desired. For example, small offices, media rooms, and classrooms benefit from speed. Then, users connect Ethernet cables and power to start instant networking. Moreover, its silent, low‑maintenance design ensures long‑term reliability. As a result, you get fast, easy network connections without hassle. Also, the sturdy housing resists wear and delivers dependable service. Finally, the Ruijie Reyee RG‑ES08G‑L switch brings powerful, simple networking value. Consequently, it gives users reliable gigabit connectivity in a plug‑and‑play package. Specifications: 8-Port 10/100/1000 Mbps Unmanaged Non-PoE Switch
Looking to enhance your printer’s capabilities? Consider the Original Brother WiFi Adapter NC-9110W for a seamless wireless printing experience. Firstly, installation is a breeze. Connect the NC-9110W to your Brother printer effortlessly, eliminating the hassle of cables and providing flexibility in printer placement. With this WiFi adapter, experience the convenience of printing from any device in your network. Whether it’s a laptop, tablet, or smartphone, the NC-9110W ensures a hassle-free and efficient printing process. Enjoy the benefits of enhanced mobility. Move freely within your home or office while sending print jobs wirelessly. The Original Brother WiFi Adapter NC-9110W simplifies your printing tasks, making it a valuable addition to your setup. Additionally, this WiFi adapter ensures a stable and reliable connection, preventing interruptions during crucial printing tasks. Say goodbye to the constraints of traditional wired connections and welcome a new era of printing convenience. The NC-9110W is designed to be user-friendly, making it accessible to both tech-savvy individuals and those less familiar with technology. Its straightforward setup and operation ensure a smooth transition to wireless printing. In summary, the Original Brother WiFi Adapter NC-9110W is a game-changer for your printer. Upgrade to wireless printing simplicity today and experience the efficiency and flexibility it brings to your home or office printing needs. Specifications: 2.4/5GHz Wi-Fi module IEEE 802.11b/g/n wireless network interface. Print wirelessly from a laptop, smartphone or tablet.
TP-Link EAP620 HD AX1800 Ceiling Mount Wi-Fi 6 Access Point is a high-density business access point designed for stable wireless coverage in offices, hotels, schools, and commercial spaces. It uses Wi-Fi 6 technology to improve speed, capacity, and efficiency for many connected devices. The access point supports dual-band Wi-Fi 6 with combined speeds up to 1775 Mbps, including 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. Therefore, it delivers fast and stable performance even in crowded network environments. In addition, OFDMA and MU-MIMO technologies improve multi-device handling. Moreover, it is designed for ceiling or wall mounting to provide wide and even signal distribution. As a result, it reduces dead zones and improves coverage across large indoor areas. The EAP620 HD supports PoE+ power, allowing both data and power through a single Ethernet cable. Therefore, installation is simpler and more flexible in different building setups. In addition, it integrates with Omada SDN for centralized network management and remote control. It also includes enterprise security features such as WPA3, guest networks, and access control. Moreover, it supports seamless roaming so users stay connected while moving between access points. Finally, the TP-Link EAP620 HD delivers reliable Wi-Fi 6 performance, high device capacity, and scalable business-grade network management. Specifications: Wi-Fi: AX1800 dual-band Wi-Fi 6 up to 1775 Mbps total speed Coverage: Ceiling mount design for wide indoor coverage Capacity: High-density support with OFDMA and MU-MIMO Power: PoE+ support for simple single-cable installation Management: Omada SDN centralized network control
Logitech Brio 500 is a Full HD 1080p webcam designed for video calls, streaming, and remote work. It delivers clear image quality with support for HDR, helping improve brightness and detail in different lighting conditions. In addition, it uses auto light correction to adjust exposure based on the environment. Therefore, it helps maintain a balanced image even in low-light or mixed lighting setups. The webcam supports 1080p resolution at 30fps for smooth video performance. Moreover, it includes a built-in microphone system with noise reduction for clearer voice capture during calls. It features Logitech Show Mode, which allows users to tilt the camera downward to share documents or objects on a desk. As a result, it is useful for presentations and hybrid meetings. Finally, it connects via USB-C and supports plug-and-play setup on most operating systems, making it easy to use without additional drivers. Specifications: Resolution : 1080p/30fps, 720p/60fps Camera : 4 Megapixels Hardware Zoom : Digital 4x Built-in microphone type : Stereo microphone USB Connectivity : USB-C Plug and Play
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
The NCTS HDMI 2.0 cable (3 meters) delivers high-speed and reliable audio/video transmission with support for 4K UHD resolution. Perfect for TVs, monitors, gaming consoles, and home theater systems, it provides a stable connection and clear visuals for everyday and entertainment use. The NCTS HDMI 2.0 Cable 3M is a dependable solution for connecting devices such as laptops, PCs, gaming consoles, and media players to TVs, monitors, and projectors. Supporting 4K UHD video, this cable ensures sharp image quality and smooth performance for movies, gaming, and presentations. Its 3-meter length offers flexible setup options, making it ideal for home, office, and entertainment environments. HDMI 2.0 Standard for high-quality video and audio Supports 4K UHD Resolution for sharp and detailed visuals High-Speed Performance for smooth playback and stable signal 3M Length perfect for flexible positioning and setups Compatible with TVs, Monitors, and Projectors Ideal for PS4 / Xbox / TV Boxes / PCs Durable Build Quality designed for long-term use Plug & Play no setup required Works with all HDMI-enabled devices, including TVs, monitors, projectors, PlayStation, Xbox, laptops, PCs, receivers, and streaming devices. Ideal for users who need a longer cable for home theater setups, gaming stations, or office installations.
The Logitech Brio 501 Webcam delivers clear video with Full HD resolution for meetings and streaming. It ensures a professional appearance in calls. Moreover, RightLight 4 adjusts lighting automatically. This helps you look clear in low or uneven light. The auto-framing feature keeps you centered during movement. This improves your presence during meetings. In addition, Show Mode lets you tilt the camera to present objects. This is useful for desk demonstrations. Dual noise-reducing microphones capture clear voice audio. Background noise is reduced during calls. It also includes a built-in privacy shutter for security. USB-C connectivity ensures easy setup and compatibility. The Logitech Brio 501 Webcam is a reliable choice for video calls, streaming, and daily communication. Specifications: Resolution : 1080p/30fps, 720p/60fps Camera : 4 Megapixels Hardware Zoom : Digital 4x Built-in microphone type : Stereo microphone USB Connectivity : USB-C Plug and Play Color : Graphite
UPS ONLINE 3KVA 2400W 1 YEAR WARRANTY ABSOLUTELY PURE SINUSWELLE – With this inverter / inverter you operate your 220V devices via a 24V battery and a continuous power of 2400W 3KVA. Inverter is a device that allows you to use electrical devices everywhere, even when you are not at the power source MULTIFUNCTION HYBRID UNIT – Thanks to the small LCD display, it is also possible to charge the batteries with AC / solar charge controllers, setting the input voltage range and charging current. MODERN PROTECTION FEATURES – The device has many modern safety features such as: overload protection, overheating protection, short-circuit protection, so it is also suitable for home appliances, as well as microwaves, air conditioners, refrigerator, fan and daylight lamp. HIGH QUALITY MATERIALS – Equipped with PWM control, the inverter generates a pleasing amount of waste heat.
The Razer Cobra Lightweight Wired Gaming Mouse is built for fast, precise, and reliable performance in competitive gaming. It delivers smooth tracking and responsive control for FPS and everyday use. Razer equips this mouse with an 8500 DPI optical sensor for accurate movement and consistent aiming. It features a lightweight design that improves speed and reduces fatigue during long sessions. The Razer Cobra Lightweight Wired Gaming Mouse includes Razer Chroma RGB lighting for customizable effects and game synchronization. Its ergonomic shape supports comfortable grip and stable control. The wired connection ensures zero latency and stable performance. It is designed for players who want precision, speed, and reliable gaming input. Specifications: 8500 DPI optical sensor for precision Lightweight design for fast movement Razer Chroma RGB lighting support Ergonomic shape for comfort Wired connection for zero latency
