PCE UPS 2400VA Raad 1200W is a line-interactive UPS designed to protect computers, routers, and office equipment from power failures and unstable voltage. It provides stable backup power during outages and supports everyday device protection. In addition, it supports Automatic Voltage Regulation (AVR). Therefore, it stabilizes fluctuating input voltage without switching to battery mode. Moreover, it helps extend battery lifespan by reducing unnecessary discharge during minor voltage changes. It also delivers 1200W output capacity for connected loads. Furthermore, it uses simulated sine wave output. As a result, it ensures compatible backup performance for standard PCs and networking devices. It also supports external battery configurations, allowing extended backup time depending on setup. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and voltage irregularities. Moreover, it provides automatic switching between mains and battery mode for uninterrupted operation. Overall, PCE UPS 2400VA Raad 1200W delivers reliable backup power, stable voltage control, and essential protection for home and office environments. Specifications: 2400VA / 1200W capacity for PCs and office devices Line-interactive UPS with AVR voltage regulation Simulated sine wave output for stable operation External battery support for extended runtime Overload and voltage protection for connected devices
INVO Online INH600 INVO Online UPS High Frequency 6000 VA, LCD Display Inbuilt Battery 16 x 12V/7Ah online ups system high frequency and high load management. Full Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 6 KVA/4200W Half -Load 120 -300VAC, Full -Load 165V -300VAC 176V`~276VAC Frequency 45.5Hz ~ 54.5Hz Power Factor 0.95 Output Voltage 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm Battery Model 12V Sealed Lead -Acid Voltage 36DC 96DC 240C Configuration Recharge 90% Capacity after 8 Hours charging RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : AC Input Bypass AC Output Battery Fault Screen LCD AC Input Bypass AC Output Battery Fault Screen LCD 1 year warranty Manufacturer Link
The APC UPS 600W 1000VA Line Interactive BV1000I-GR provides reliable backup power for home and office devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected devices against surges, spikes, and short outages. Moreover, the compact design allows easy placement on desks or near electronics. Finally, the UPS includes LED indicators to monitor battery and load status. The BV1000I-GR ensures uninterrupted operation and protects important electronics during power interruptions. Specifications: 600W / 1000VA line-interactive output protects devices Safeguards against power surges, spikes, and outages Compact design for easy placement on desks or near electronics LED indicators monitor battery and load status Ensures uninterrupted operation during short power interruptions
The Twist Line Interactive UPS 1500VA TWUP1500/LI provides backup power protection for computers, networking devices, and office equipment. It uses line interactive technology with automatic voltage regulation for stable output performance. Additionally, the built-in dual 12V/7Ah batteries support continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear power monitoring and system alerts. It also supports overload and short-circuit protection for safer daily operation. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits home and office environments easily. The system also supports cold start functionality and simulated sine wave output for common electronic devices. Additionally, the automatic battery charging system improves operational reliability. Specifications: 1500VA line interactive UPS technology Built-in 2x12V/7Ah rechargeable batteries LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
The Yuasa SW280 Industrial VRLA Battery delivers dependable backup power for industrial systems. It uses Valve Regulated Lead Acid (VRLA) technology for safety and maintenance-free use. Also, its sealed design prevents leaks and allows flexible installation. First, this battery is built to last in tough environments. Moreover, it resists vibrations and shocks in heavy machinery settings. Therefore, it works well in factories, security systems, and telecom units. Second, the Yuasa SW280 provides high capacity and consistent performance. It delivers stable output during power outages or load changes. In addition, it supports long discharge times when needed. Consequently, your critical system stays operational without interruption. Also, this battery is easy to install and service. It fits standard industrial racks and cabinets. Plus, it has clear terminal markings for safe connection. Thus, technicians can install it quickly and correctly. Moreover, the VRLA design means no water topping up is required. Therefore, you avoid extra maintenance and reduce downtime. Furthermore, the sealed casing minimizes acid exposure risk. Hence, it is safer for indoor installations. Another key feature is reliable thermal performance. It operates well in temperatures from 0°C to 40°C. Also, it handles variations in industrial climates. Thus, it maintains long service life and consistent power. Importantly, Yuasa provides strong quality assurance. Their factories follow strict ISO standards for production. Also, full warranty coverage gives peace of mind. Hence, you can trust the battery for critical workloads. In summary, the Yuasa SW280 Industrial VRLA Battery combines durability, safety, and dependable power. Furthermore, its maintenance-free and sealed design adds convenience and protection. If you need a trusted industrial battery, this is an excellent choice. Specifications: Length (mm) : 151 Width (mm) : 65 Height (mm) : 97.5 Weight (kg) : 2.6 Nominal Voltage : 12
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
The INVO INSR Stabilizer offers automatic voltage regulation for homes and offices. It supports single-phase input from 1000 VA to 5000 VA, covering multiple needs . Moreover, it features a clear LCD that shows input and output voltages. This stabilizer uses a sturdy metal cabinet to protect internal parts. Also, it adds a three-second power delay to protect connected devices . Therefore, your appliances start safely after power returns. It comes in models such as INSR1000, 1500, 2000, 3000, and 5000 VA. This range suits small PCs to mid-sized equipment and appliances . Additionally, installation is easy via wall mount or tabletop placement. Built-in protections include overvoltage, undervoltage, and overload safety. This helps prevent damage during electrical fluctuations. It also resists heat and short circuit events. Thus, it keeps both electronics and home safe. Thanks to its servo-controlled design, it delivers steady output within ±3%. Hence, your sensitive devices run smoothly and securely. It also operates quietly, ideal for offices and study rooms. Plus, it’s energy efficient and requires minimal maintenance. Furthermore, its LCD display and simple controls make setup fast. The stabilizer supports various uses like PCs, printers, routers, TVs, and appliances. In short, the INVO INSR Stabilizer combines solid performance, safety, and ease. Choose this device when you need dependable voltage control at home or office. Specifications: INSR300 INVO Automatic Voltage Regulator 3000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR200 INVO Automatic Voltage Regulator 2000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR150 INVO Automatic Voltage Regulator 1500VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR100 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR50 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs
Specifications : GENERAL Rated Power 5000VA / 5000W Communication Interface Removable USB / RS232 / RS485 / Bluetooth / Dry-contact Dimension D x W x H (mm) 115 x 300 x 400 Net Weight (kgs) 13 INPUT Voltage 230VAC Selectable Voltage Range 170 ~ 280 VAC (For Personal Computers)90 ~ 280 VAC (For Home Appliances) Frequency Range 50Hz / 60Hz (Auto sensing) OUTPUT AC Voltage Regulation (Batt. Mode) 230VAC ± 5% Surge Power 10000VA Efficiency (Peak) 90% ~ 93% Transfer Time 15 ms (For Personal Computers)20 ms (For Home Appliances) Waveform Pure sine wave BATTERY Battery Voltage 48VDC Floating Charge Voltage 54VDC Overcharge Protection 63VDC SOLAR & AC CHARGER Solar Charger Type MPPT Maximum PV Array Open Circuit Voltage 500VDC Maximum PV Array Power 5000W MPP Range @ Operating Voltage 120VDC~450VDC Maxmum Solar Charge Current 100A Maximum AC Charge Current 100A manufacturer link
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
The Beco GP800 800VA 480W UPS delivers dependable power protection for home and office electronics. It keeps devices running during short power cuts. This helps prevent data loss and sudden shutdowns. Users enjoy peace of mind with reliable backup power. Moreover, the Beco GP800 UPS features 800 VA capacity and 480 W output power for stronger protection. It supports desktops, routers, modems, and monitors easily. Devices stay powered long enough to save work. Performance remains stable. In addition, the UPS includes built-in surge protection for safety against spikes. It guards appliances from voltage surges and unstable power conditions. This adds extra defense during storms or power fluctuations. Protection stays consistent. Furthermore, the Beco GP800 800VA 480W UPS offers automatic voltage regulation without manual adjustment. It corrects voltage dips and spikes smoothly. This helps maintain steady performance for connected devices. Reliability improves everyday use. Also, the unit provides battery backup during outages to keep systems running. You can finish tasks and save files before shutdown. This reduces the risk of data corruption. Battery backup feels dependable. In addition, the Beco GP800 UPS includes clear LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring simple and fast. Users stay informed. Furthermore, the Beco GP800 UPS supports easy installation and setup. Users can plug in devices quickly without complicated steps. Setup remains stress-free for beginners and experts. Overall, the Beco GP800 800VA 480W UPS delivers reliable battery backup, surge protection, and stable power output. It protects electronics and supports uninterrupted use. This UPS is ideal for users seeking strong, everyday power protection. Specifications: 800VA, 480W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
UPS battery 12V 7A Battery for UPS 7A 12v
PCE MX Online 6KVA 5400W Internal Batteries Double Conversion Online- Pure Sine Wave
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
PCE EX Online 3 KVA 2700W is a double-conversion online UPS designed for continuous and stable power protection. It is used for sensitive equipment such as servers, network systems, and critical office devices that require uninterrupted electricity. In addition, PCE EX Online 3 KVA 2700W uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers clean and stable pure sine wave output for safe operation of connected devices. Furthermore, PCE EX Online 3 KVA 2700W supports a 3000VA / 2700W capacity rating. As a result, it can handle high-load systems such as multiple PCs and networking equipment. It also maintains consistent voltage regulation for sensitive electronics during unstable power conditions. In addition, PCE EX Online 3 KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, voltage fluctuations, and power failures. Moreover, it is designed for long-duration reliability in professional environments. Overall, PCE EX Online 3 KVA 2700W delivers strong performance, zero-interruption switching, and high-level protection for critical power backup needs. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive devices Advanced protection against overload and faults
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
APC UPS Accessories SURT48XLBP APC Smart-UPS RT 48V 1/2KVA SURT models Battery Pack
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
