APC UPS Accessories SURT48XLBP APC Smart-UPS RT 48V 1/2KVA SURT models Battery Pack
Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
The PCE PCD 12V 100Ah Deep Cycle Battery delivers strong and reliable power for many applications. It offers a larger 100Ah capacity for extended use. This helps engines, systems, and devices run longer between charges. Users experience dependable energy when needed most. Moreover, the PCE PCD Deep Cycle Battery uses a deep cycle design built for repeated discharge and recharge. It supports long-term use without damage. This increases the battery’s lifespan and reduces replacements. Performance remains consistent over time. In addition, the battery provides a stable 12 V output for balanced power delivery. It suits solar systems, RVs, marine setups, and backup power solutions. Power stays steady for lights and appliances. Daily use becomes more efficient. Furthermore, the PCE PCD 12V 100Ah Deep Cycle Battery features a rugged casing that protects internal cells. The strong build resists wear and harsh conditions. This helps maintain performance in many environments. Durability feels reassuring. Also, the battery supports deep discharge recovery for long service life. It recovers well after heavy use cycles. This improves energy storage and reliability. Users rely on strong power anytime. In addition, the PCE PCD Deep Cycle Battery is easy to install in compatible racks and holders. Connections stay secure and simple. Setup feels user-friendly for both beginners and professionals. Installation remains smooth. Furthermore, the PCE PCD Deep Cycle Battery performs steadily across varying temperatures. It stays reliable in moderate heat and cold. This makes it ideal for outdoor and mobile use. Overall, the PCE PCD 12V 100Ah Deep Cycle Battery delivers dependable power, long life, and robust performance. It fits homes, boats, RVs, and solar systems. This battery is perfect for users who want strong, lasting deep cycle energy every day. Specifications: Voltage : 12V Capacity : 100Ah
The Beco GP600 600VA 360W UPS delivers reliable power protection for home and office devices. It keeps your electronics safe during outages and voltage drops. This UPS helps prevent data loss and sudden shutdowns, providing peace of mind every day. Moreover, the Beco GP600 600VA 360W UPS features 600 VA capacity with up to 360 W output power. It supports computers, routers, modems, and monitors effortlessly. Devices continue running smoothly during short power interruptions. This improves system stability. In addition, the UPS includes built-in surge protection for safe operation. It guards connected devices against spikes and surges. This adds an extra layer of defense during storms or unstable power conditions. Safety remains a priority. Furthermore, the Beco GP600 600VA 360W UPS offers battery backup that keeps equipment running long enough to save work. This prevents data corruption during sudden outages. Users can shut down systems properly. Protection feels dependable. Also, the unit delivers stable voltage regulation without manual adjustment. It corrects fluctuations automatically. This improves device performance and lifespan. Steady power enhances everyday use. In addition, the Beco GP600 600VA 360W UPS includes easy-to-read LED indicators. They show power and battery status at a glance. Users stay informed without confusion. Monitoring becomes simple and quick. Moreover, the UPS features multiple outlets for connecting several devices at once. This increases flexibility for workstations and entertainment setups. You can protect more devices with one unit. Furthermore, the Beco GP600 600VA 360W UPS supports simple installation without complicated steps. Setup is quick with clearly marked connections. This helps both beginners and experienced users. Also, the compact design fits well on desks or shelves without taking much space. It blends into home and office environments easily. Portability stays practical. Overall, the Beco GP600 600VA 360W UPS delivers dependable battery backup, surge protection, and steady power. It protects vital electronics and supports uninterrupted use. This UPS is ideal for users seeking reliable power protection every day. Specifications: 600VA, 360W, LED, Plastic Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 7AH *1pc, Universal Socket *2 + EU Plug With AVR, Bypass output Overload and short circuit protection
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
PCE MX Online 6KVA 5400W Internal Batteries Double Conversion Online- Pure Sine Wave
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
Vertiv Emerson Liebert itON LI32121CT00 800VA
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
