Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
The PCE PCD 12V 100Ah Deep Cycle Battery delivers strong and reliable power for many applications. It offers a larger 100Ah capacity for extended use. This helps engines, systems, and devices run longer between charges. Users experience dependable energy when needed most. Moreover, the PCE PCD Deep Cycle Battery uses a deep cycle design built for repeated discharge and recharge. It supports long-term use without damage. This increases the battery’s lifespan and reduces replacements. Performance remains consistent over time. In addition, the battery provides a stable 12 V output for balanced power delivery. It suits solar systems, RVs, marine setups, and backup power solutions. Power stays steady for lights and appliances. Daily use becomes more efficient. Furthermore, the PCE PCD 12V 100Ah Deep Cycle Battery features a rugged casing that protects internal cells. The strong build resists wear and harsh conditions. This helps maintain performance in many environments. Durability feels reassuring. Also, the battery supports deep discharge recovery for long service life. It recovers well after heavy use cycles. This improves energy storage and reliability. Users rely on strong power anytime. In addition, the PCE PCD Deep Cycle Battery is easy to install in compatible racks and holders. Connections stay secure and simple. Setup feels user-friendly for both beginners and professionals. Installation remains smooth. Furthermore, the PCE PCD Deep Cycle Battery performs steadily across varying temperatures. It stays reliable in moderate heat and cold. This makes it ideal for outdoor and mobile use. Overall, the PCE PCD 12V 100Ah Deep Cycle Battery delivers dependable power, long life, and robust performance. It fits homes, boats, RVs, and solar systems. This battery is perfect for users who want strong, lasting deep cycle energy every day. Specifications: Voltage : 12V Capacity : 100Ah
The APC Smart-UPS RC 800W 1KVA Sine Wave SRC1KI provides reliable backup power for critical devices. First, it delivers pure sine wave output, ideal for sensitive electronics. In addition, the UPS protects connected equipment from power surges, spikes, and outages. Moreover, it features a compact design for easy placement in offices or server rooms. Finally, the unit includes an intuitive LCD interface for monitoring battery status and load. The SRC1KI ensures continuous operation and safeguards important systems during power interruptions. Specifications: 800W / 1KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design for office or server room placement LCD interface for monitoring battery and load status Ensures continuous operation during power interruptions
Specifications : High Reliability Advanced DSP (Digital signal processors) technology Variable speed fan Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Advanced digital parallel technology High Availability Wide input voltage range, 50 / 60 Hz frequency auto sensing Linear derating in low voltage input reducing battery discharging times, extending the service life of battery Dual-input design, supporting independent bypass Output power factor improved from 0.9 to 1, load capacity increased by 13% Flexible battery configuration (settable 16 – 20 pcs batteries) Charging voltage and current configured by demands Ability to switch on the UPS with batteries Settable delayed start time when mains power is restored, reducing the impact on power grid or generator Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output High Usability LCD+LED display, multi-functional keys operation, friendly human-machine interface Powerful background software for parameters configuration and online updating Compact internal layout, miniaturized the complete unit for small footprint High Intelligence Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% Energy Conservation and Environment Protection Active power factor correction (APFC), input power factor up to 0.99 High efficiency 95% (up to 98% in ECO mode) Automatic power On/Off according to the load capacity set by users Equipped with self-aging function
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 1000 Nominal Power (W) 800 Standard Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 9.8 Long-run Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 4.1 INPUT Connection Type IEC 320-C14 Nominal Voltage 200/208/220/230/240 VAC Voltage Range 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range 45 ~ 70 Hz Power Factor >= 0.99 OUTPUT Connection Type 3 x Universal socket (PRO901WS) 2 x Universal socket (PRO901WL) Nominal Voltage 200/208/220/230/240 VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232* USB Port BATTERY Standard Model Type 12V / 9Ah Numbers 2 Typical Recharge Time 4 hours recover to 90% capacity Long-run Model Type Depending on the capacity of external batteries Number 2 or 3 Charging Current (max) 1A / 2A / 4A / 6A Adjustable manufacturer link
PCE EX Online 3 KVA 2700W is a double-conversion online UPS designed for continuous and stable power protection. It is used for sensitive equipment such as servers, network systems, and critical office devices that require uninterrupted electricity. In addition, PCE EX Online 3 KVA 2700W uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers clean and stable pure sine wave output for safe operation of connected devices. Furthermore, PCE EX Online 3 KVA 2700W supports a 3000VA / 2700W capacity rating. As a result, it can handle high-load systems such as multiple PCs and networking equipment. It also maintains consistent voltage regulation for sensitive electronics during unstable power conditions. In addition, PCE EX Online 3 KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, voltage fluctuations, and power failures. Moreover, it is designed for long-duration reliability in professional environments. Overall, PCE EX Online 3 KVA 2700W delivers strong performance, zero-interruption switching, and high-level protection for critical power backup needs. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive devices Advanced protection against overload and faults
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
【2021 New 60W PD Version】This well-rececived large power bank is now back with 2 high-speed USB-C PD ports to refresh your portable charging experience. USB-C (1) port can transfer up to 60W power to your laptop while USB-C (2) port can keep your phones charged at a maximum speed of Max. 27W on the go. 【Massive Capacity】Packed with a enormous capacity of 72000mAh/266Wh as well as battery management system, this portable charger can pump out enough power to multiple devices simultaneously and securely at a high power conversion rate up to 90%. (Note: not TSA-approved, not allowed on a plane) 【Off-Grid Power for CPAP】The high-performing DC 12V/5A (150W max.) cigarette lighter port is ready to boost most CPAP machines on the market with a CPAP adapter (PURCHASED SEPARATELY), including Philips Dreamstation, Resmed Airsense/Aircurve 10, and Resmed S9. Please turn OFF the heater & the humidifier for extended runtime. 【Faster Recharging】Recharge the battery pack at full-speed via a solar panel with the two-way DC port in 3-4 hours, and the two-way USB-C (1) port in 5-6 hours. Please note that the USB-C (1) port and the DC port CANNOT be used at the same time. 【10W Wireless Charging】Align your smartphone to the charging pad to get rid of cords jumbled in your bag. The smart indicator allows you to keep taps on real-time charging status effortlessly. DOES NOT support wireless earbuds, smartwatches, and other low-power devices. https://www.renogy.com/content/files/Manuals/RC-P72000-01%202018.3.23.pdf
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
Prolink PRO906WS 6KVA / 4800W Online UPS with AVR is a high-performance power backup solution designed for critical devices, servers, and sensitive electronics. It provides stable and continuous power protection against outages and voltage fluctuations. It features a 6000VA (4800W) capacity with pure sine wave output. Therefore, it ensures clean and reliable power delivery for computers, networking equipment, and industrial systems. In addition, it protects devices from sudden power loss and electrical damage. The UPS uses online double-conversion technology with built-in AVR (Automatic Voltage Regulation). As a result, it delivers consistent voltage output and improves equipment safety during unstable power conditions. It supports heavy-duty usage and long backup operation depending on load. Meanwhile, its robust design makes it suitable for business, IT infrastructure, and professional environments. Prolink designs its UPS systems for reliability and protection. Therefore, this model is an ideal choice for users who need uninterrupted and stable power supply for critical operations. manufacturer link Specifications: 6000VA / 4800W high capacity Pure sine wave output Online double-conversion UPS Built-in AVR voltage regulation Ideal for servers and critical systems
INVO Online INH100 INVO Online INH100 Centralized server center, mainframe, network control center, computing center max efficiency UPS System . AC Input Bypass AC Output . Battery Fault Screen OFF ON LCD AC Input Bypass AC Output Battery Fault Screen OFF ON LCD INVO Online INH100 Full Specifications : INVO Online INH100 Centralized server center, mainframe, network control center, computing center INVO Online INH100 UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH Specifications: Specifications : Centralized server center, mainframe, network control center, computing center INVO Online UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH 1 year warranty Manufacturer Link
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
The ProLink PRO851SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep essential devices operating during short power interruptions and unstable electrical conditions. The UPS provides an 850VA capacity and features line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize voltage fluctuations and protects connected devices from overvoltage and undervoltage conditions. The ProLink PRO851SFCU features super-fast charging technology that significantly reduces battery recharge time after power outages. Moreover, this feature helps ensure the UPS is ready for future interruptions more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PRO851SFCU includes LED status indicators that allow users to monitor operating conditions easily. Therefore, users can quickly check power status, battery mode, and system operation. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides dependable backup support for desktop computers, routers, CCTV systems, and other important electronic devices. The ProLink PRO851SFCU Super Fast Charging UPS combines backup power, fast battery charging, AVR technology, and safety features. As a result, it provides a practical and reliable power protection solution for everyday use. Specifications: Capacity : 850VA Input : 230VAC Output : 230VAC Input Voltage : 510W Transfer Time : 2ms Battery Type : 12V/10Ah x1 Backup Time : 10-30 Min Part Number : PRO851SCFU
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
