The TP-Link Deco X50-PoE AX3000 Whole Home Mesh WiFi 6 System is a mesh networking solution designed to deliver seamless wireless coverage for homes and businesses. It supports Wi-Fi 6 technology, Power over Ethernet (PoE), and multi-gig wired networking, making it suitable for high-speed internet, streaming, gaming, and smart home devices. The system provides combined AX3000 dual-band wireless speeds of up to 2402Mbps on the 5GHz band and 574Mbps on the 2.4GHz band. Therefore, it handles multiple connected devices with stable performance. In addition, Wi-Fi 6 technologies such as OFDMA, MU-MIMO, and 1024-QAM improve network efficiency and reduce congestion. Moreover, each Deco unit supports both PoE and DC power, allowing flexible ceiling, wall, or desktop installation. As a result, network deployment becomes easier in homes, offices, retail stores, and commercial environments. The integrated AI-Driven Mesh technology automatically selects the best connection as devices move throughout the coverage area. Each unit includes one 2.5 Gigabit WAN/LAN port and one Gigabit WAN/LAN port for high-speed wired networking. Furthermore, the system supports TP-Link HomeShield security, WPA3 encryption, IPv6, guest networks, and management through the Deco mobile app. Finally, the TP-Link Deco X50-PoE AX3000 Whole Home Mesh WiFi 6 System combines Wi-Fi 6 performance, flexible PoE installation, and fast wired connectivity for reliable whole-home networking. Specifications: AX3000 Dual-Band Wi-Fi: Fast speeds for 4K streaming and gaming. PoE Support: One cable handles both power and data. Seamless Mesh: Eliminates dead zones throughout the entire home. High-Speed Ports: Features a 2.5 Gbps port for fast wired connections. HomeShield: Advanced security to protect all your connected devices.
The PROLINK HAUS V III 3KM-24 Inverter provides reliable backup power for homes, offices, and essential devices. It helps users maintain power during outages and supports daily electrical needs with stable output. The inverter delivers 3000W of power and uses a 24V battery system. Additionally, it provides pure sine wave output for compatible appliances, computers, and sensitive equipment. The PROLINK HAUS V III 3KM-24 features an LCD display for easy monitoring. Users can check important information such as battery status, input voltage, output voltage, and system conditions. Moreover, the display helps simplify daily operation. The inverter supports adjustable charging settings for different battery requirements. Furthermore, it includes protection features against overload, short circuit, over-temperature, and low battery conditions. These features help keep connected devices safer during operation. The PROLINK HAUS V III 3KM-24 supports solar charging with compatible solar panels. Therefore, users can include it in a backup power system for homes and small offices. It also offers flexible installation options for different power setups. The PROLINK HAUS V III 3KM-24 Inverter combines strong power output, battery support, monitoring options, and protection features. As a result, it provides a dependable solution for users who need stable backup power. Specifications: Rated Power: 3000W Battery Voltage: 24VDC Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Low Battery Protection
D-Link Layer 2 Smart DGS-F1100-10PS-E/E The D-Link Layer 2 Smart is a 10 port Smart Managed Gigabit Switch with 8/10/100/1000 Mbps PoE ports, 2 Gigabit SFP uplink. This Switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs), IP cameras. Power Over Ethernet The DGS-F1100-10PS-E/E supports both IEEE 802.3at and IEEE 802.3af PoE protocol. With a total PoE budget of 96 was ,allowing users to each an IEEE device to the DGS-F1100-10PS-E/E without power. PoE is especially suitable for devices that are far from power outlets or when users want to minimize the of extra cables as power is supplied via the Ethernet cables themselves Features Superior connectivity Standards • 802.3 10BASE-T Ethernet (twist-pair copper) • 802.3u 100BASE-TX Fast Ethernet (twisted pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper) • .3z 1000 BASE-X (fiber-optic) • .3af Power over Ethernet • 802.3at Power over Ethernet Easy to Use • 802.3x Flow Control Technical Specificatons Functionality Physical Network Interface 8 10/100/1000 Mbps PoE RJ45 port 2Gigabit SFP Ports Switching Capacity Packet Forwarding LED’s Indicator Budget MAC Address Table Power Lightning protecon Physical Characteristics Environmental Parameter Dimensions (LxWxH): 228 x 121 x 37mm Weight: 1.25kg Operating Temperature: O to 40°C (32 to 104°F) Storage Temperature: -40° to 70°C Operating Humidity: 10% to 90% non-condensing Storage Humidity: 5% to 95% non-condensing 20 Gbps 14.88 Mpps Power, SYS, LINK/ACT, PoE 96W 8K Entries External Power Adapter: 100-240~50/60Hz, 52V/1.85A 6KV DIP Switches VLAN, Extend, PoE, QoS Transmission Rate 10/100/1000Mbps Each port supports MDI / MDIX auto-flip and Network interface: 10BASE-T or 100BASE-TX, 1000 BASE-T Ethernet RJ-45 port Protocols and Standards IEEE802.3 10BASE-T IEEE 802.3u 100BASE-TX ANSI/IEEE 802.3 NWay IEEE802.3ab 1000 BASE-T IEEE802.3z 1000 BASE-X IEEE802.3x Flow Control IEEE 802.3af/at standard Specifications: Specifications 8 x 10/100/1000BASE-T PoE ports 2 x SFP ports Supports IEEE 802.3at PoE Innovative D-Link Green energy saving features Complete web interface for comprehensive switch management 1 Year warranty Manufacturer Link
The Ruijie Reyee RG-ES210GS-P 10‑Port Gigabit Smart Cloud Managed PoE Switch combines powerful Gigabit networking and smart cloud control. It features eight PoE+ Gigabit ports and two Gigabit uplink ports for high-speed connections. Moreover, it supports 802.3af/at standards to power cameras, access points, and VoIP phones. Also, it offers a generous PoE budget of 130 W to handle multiple devices. In addition, this switch is cloud managed via Ruijie’s Reyee Cloud platform for easy control. Besides that, it uses a plug‑and‑play design for simple installation. Furthermore, auto‑negotiation and auto MDI/MDIX simplify cable compatibility. Therefore, you avoid wiring issues and speed setup. It provides non‑blocking switching to ensure smooth data flow even under heavy use. Also, the switch includes VLAN, QoS, and PoE scheduling features for flexible network management. Plus, built‑in surge protection safeguards your devices from electrical spikes. Meanwhile, the sturdy metal casing boosts durability and helps with heat dissipation. Importantly, intelligent fan control keeps the device quiet and efficient. Also, the switch operates reliably between 0 °C and 45 °C in typical environments. Moreover, rack and desktop placement options make it versatile for many setups. Unlike unmanaged switches, it supports remote management through the Reyee Cloud app. However, it requires no on‑site software installation to manage features. For example, offices, retail stores, and campuses benefit from centralized control and PoE power. Then, users simply configure devices via web or mobile app. Moreover, combining data and power over one cable reduces cable clutter. As a result, deployment is cleaner and faster compared to separate wiring. Also, the intuitive cloud interface lets users monitor devices and traffic easily. Furthermore, firmware updates can be scheduled remotely for security and stability. In conclusion, the Ruijie Reyee RG-ES210GS-P switch delivers smart, powerful, cloud‑managed PoE networking. Finally, it offers excellent flexibility, scalability, and simplicity in modern network environments. Specifications: 10-Port Gigabit Smart Cloud Managed PoE Switch
The TP-Link TL-WR820N Router is a compact wireless router that provides fast and reliable Wi-Fi for home use. High-Speed Wireless It delivers stable Wi-Fi on the 2.4GHz band for browsing, streaming, and light gaming. Moreover, multiple devices can connect without interruptions. Easy Setup and Management Setup is simple using the web interface or the TP-Link Tether app. In addition, users can manage Wi-Fi settings and parental controls remotely. Stable Coverage Advanced antennas extend coverage to eliminate dead zones. Meanwhile, the router maintains a steady connection for all devices in the home. Secure Network Built-in security protects connected devices. Furthermore, encryption and parental controls help keep your network safe from unauthorized access. Compact and Modern Design The small design fits easily on a desk or shelf. As a result, it provides strong Wi-Fi while blending into home décor. Summary Overall, the TP-Link TL-WR820N Router delivers fast, secure, and reliable Wi-Fi for small homes or apartments. manufacturer link Specifications: Fast wireless Wi-Fi on 2.4GHz band Easy setup and remote management via app Stable coverage for small homes or apartments Built-in security and parental controls Compact design fits any space
TP-Link TL-PA4010 KIT AV600 Powerline Starter Kit is a simple networking solution that extends your internet connection through your home’s existing electrical wiring. It is designed for users who need stable wired connectivity without installing new Ethernet cables. The TL-PA4010 KIT uses HomePlug AV technology. Therefore, it can deliver powerline data speeds of up to 600 Mbps under ideal conditions. In addition, it supports transmission over distances up to 300 meters through existing electrical circuits. Moreover, the kit includes two adapters that work together in a plug-and-play setup. As a result, you only need to connect one adapter to your router and plug the second one into any room where you need internet access. In addition, no configuration is required for basic operation. The TL-PA4010 KIT also includes 128-bit AES encryption. Therefore, it helps secure the powerline connection between adapters. In addition, its built-in power-saving mode automatically reduces energy usage when traffic is low. Furthermore, its ultra-compact design allows it to fit discreetly into any power outlet without blocking nearby sockets. As a result, it is convenient for home or office use. Finally, the TP-Link TL-PA4010 KIT provides stable wired internet extension, easy installation, and efficient powerline performance for everyday networking needs. Specifications: Speed: Up to 600 Mbps AV600 powerline transmission Range: Supports up to 300 meters over electrical wiring Setup: Plug-and-play installation with no configuration required Security: 128-bit AES encryption for secure connection Efficiency: Built-in power-saving mode reduces energy usage
TPLink TL-WR902AC AC750 Wireless Travel Router for Portable Connectivity The TPLink TL-WR902AC AC750 Wireless Travel Router provides portable internet access for travelers and remote workers. It connects quickly in hotels, homes, or offices, therefore users stay online wherever networks are available. Moreover, compact size allows easy transport inside bags, making it ideal for frequent travelers and business users. Dual-band Wi-Fi delivers stable performance, so browsing and streaming remain smooth during daily use. In addition, the router supports multiple operating modes, allowing flexible connection options in different networking situations. Users can create private Wi-Fi networks, improving security when using shared hotel or public connections. Meanwhile, simple setup helps users connect devices quickly without complicated installation steps or technical knowledge. USB power support allows operation through laptops or power banks, therefore mobility becomes even more convenient during travel. Furthermore, reliable wireless performance supports phones, tablets, and laptops simultaneously while maintaining stable network speed indoors. Consequently, families and professionals can enjoy internet access across multiple devices during trips or temporary stays. The TPLink TL-WR902AC AC750 Wireless Travel Router offers a practical solution for mobile networking needs in many environments. Overall, it combines portability, flexibility, and reliable performance suitable for travel, home backup, or small workspace networking. manufacturer link Specifications: Compact design ideal for travel and portable use Dual-band Wi-Fi provides stable wireless connectivity Supports multiple operating modes for flexible networking USB powered operation improves mobility and convenience Quick setup allows fast connection in hotels or offices
The TP-Link POE150S PoE Injector lets you power PoE-compatible devices through an Ethernet cable. It delivers both power and data over a single network line, reducing wiring clutter. This injector supports IEEE 802.3af standard, providing reliable power to devices such as IP cameras or access points. Setup is simple — connect the injector between your router and the PoE device for instant power delivery. Moreover, the TP-Link POE150S PoE Injector features a compact design that fits neatly near network equipment. The unit includes clear LED indicators to show power and network activity at a glance. Its durable build ensures stable performance for everyday use in home or office networks. Because power travels over the same cable as data, installation costs and complexity are reduced. In addition, this injector supports safe operation with built-in safeguards against overload and short circuits. It works with many PoE devices, making it a flexible solution for expanding connected systems. Overall, the TP-Link POE150S PoE Injector combines convenience, compatibility, and easy setup for powering network gear. Specifications: Supplies power and data over one Ethernet cable Compliant with IEEE 802.3af PoE standard Easy plug-and-play setup LED indicators for power and network status Compact design for flexible placement
The Linksys 8-Port Managed Gigabit Ethernet Switch LGS310C delivers reliable high-speed networking for small businesses. First, it provides fast connections for multiple devices with Gigabit performance on all ports. In addition, the switch offers advanced management features such as VLAN, QoS, and traffic monitoring. Users can optimize network performance, secure data, and prioritize critical applications. Moreover, plug-and-play setup and durable design make installation simple and dependable. Finally, this compact switch supports energy-efficient operation while maintaining stable connectivity. Specifications: 8 Gigabit ports for high-speed device connections Advanced management with VLAN, QoS, and traffic monitoring Optimizes network performance and prioritizes critical applications Easy plug-and-play setup with durable design Energy-efficient operation for stable and reliable networking
The TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is designed for high-performance networking. This switch provides an effective solution for businesses needing reliable network management. With 24 gigabit ports, it offers fast and stable connections for multiple devices. This managed switch supports Layer 3 routing, allowing for efficient traffic management. This feature enhances your network’s performance by reducing latency and improving data transfer speeds. Additionally, the switch includes advanced security features. These features protect your network from unauthorized access and cyber threats. Setting up the TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is simple. The user-friendly web interface makes configuration easy, even for beginners. With features like VLAN support, you can segment your network for better management. This improves overall efficiency by organizing traffic effectively. Moreover, the switch is stackable. This means you can combine multiple switches into a single unit. Stacking increases port capacity and simplifies management. This flexibility is essential for growing networks, allowing for easy expansion without major disruptions. The switch also supports advanced QoS (Quality of Service). This feature prioritizes critical applications, ensuring your most important tasks receive the necessary bandwidth. This is especially beneficial for businesses that rely on voice and video communications. Additionally, the TP-Link Omada 24-Port Gigabit Stackable L3 Managed Switch is designed for durability and performance. Its robust construction ensures longevity, making it a great investment for your network. Upgrade your business network today with the TP-Link Omada switch. Experience the benefits of a powerful, flexible, and secure networking solution. Specifications: Interface : 24× 10/100/1000 Mbps RJ45 Ports, 4× 10G SFP+ Slots, 2× USB 2.0 Ports, 1× RJ45 Console Port, 1× USB Type-C Console Port, 1× RJ45 Management Port Switching Capacity : 128Gbps
The ASRock Phantom Gaming X870E Nova WiFi motherboard is built for high-end gaming and performance systems. It supports AMD Ryzen 9000, 8000, and 7000 Series processors on the AM5 socket. As a result, it provides strong compatibility for modern and future builds. In addition, it supports DDR5 memory with high speeds, which helps improve multitasking and system responsiveness. Moreover, this motherboard includes PCIe 5.0 support for both graphics cards and storage devices, so it ensures fast data transfer and future-ready expansion. It also features Wi-Fi 7 and high-speed LAN for reliable networking. Advanced thermal design with large heatsinks helps maintain stable performance during heavy workloads and long gaming sessions. manufacturer link Specifications: Supports AMD Ryzen 9000, 8000, and 7000 Series processors on AM5 socket DDR5 memory support with high speed and improved performance PCIe 5.0 slot and Gen5 M.2 support for fast graphics and storage Wi-Fi 7 and high-speed LAN for stable networking Advanced cooling design with large heatsinks for stable operation
SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB provides expanded storage for Nintendo Switch systems. It allows users to store downloaded games, updates, screenshots, and gameplay videos in one compact card. It supports reliable performance for everyday gaming use. In addition, SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB delivers fast transfer speeds of up to 100MB/s in compatible devices. Therefore, it helps reduce loading and transfer time when used with a UHS-I card reader. Moreover, it ensures stable performance for game data storage and access. Furthermore, this card is designed and tested for Nintendo Switch compatibility. As a result, it works smoothly with Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch OLED models. It also supports UHS-I standards for consistent read performance. Overall, SanDisk microSDXC UHS-I Card for Nintendo Switch 128GB offers dependable storage expansion for gaming libraries and digital content management. Specifications: 128GB storage capacity for games, saves, and media Up to 100MB/s read speed in compatible devices UHS-I interface for stable performance Designed and tested for Nintendo Switch systems Supports Nintendo Switch, Switch Lite, and OLED models
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
Are power outages disrupting your work or daily activities? Legrand Niky 1000 UPS provides a reliable solution for uninterrupted power supply, ensuring your devices stay powered when you need them most. To begin with, the Legrand Niky UPS offers a user-friendly design suitable for both home and office use. Its straightforward setup makes it an ideal choice for individuals seeking a hassle-free power backup solution. Transitioning to the features, this UPS comes equipped with automatic voltage regulation (AVR), safeguarding your electronic devices from voltage fluctuations. Enjoy peace of mind as Niky 1000 maintains a stable power output. Additionally, the compact size of the Legrand Niky 1000 UPS makes it easy to integrate into any space, whether it’s your home office or a small business environment. Its sleek design ensures it won’t be an eyesore in your setup. Investing in this UPS means you can keep your essential devices running during power interruptions. With a capacity of 1000VA, it provides ample power for computers, routers, and other sensitive electronic equipment. Moreover, the Legrand Niky UPS is energy-efficient, helping you save on electricity costs. Its automatic shutdown feature prevents battery depletion during prolonged outages, extending the lifespan of the UPS. In conclusion, Legrand Niky 1000 UPS is a cost-effective and dependable solution for uninterrupted power supply. Explore its features and benefits to ensure your devices stay powered up, no matter the circumstances. Upgrade to reliable power today! Specifications: Nominal power : 1000VA Active power : 600W Technology : Line-interactive VI Input Voltage : 230V
WiWU Durable USB C to Type C PD 60W Fast Charging Cable for Mobile Phone Laptop Tablet
Vertiv Emerson Liebert itON LI32121CT00 800VA
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Input voltage range for main operations 110 – 300 Adjustable (half load), 176 – 300V Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 373 Watts Runtime View Runtime Graph View Runtime Chart Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 685MM, 68.5CM Maximum Width 190MM, 19.0CM Maximum Depth 374MM, 37.4CM Net Weight 54.0KG Shipping weight 66.0KG Shipping Height 910MM, 91.0CM Shipping Width 290MM, 29.0CM Shipping Depth 495MM, 49.5CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 (Non-condensing) % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Protection Class IP20 1 YEAR WARRANTY
The PCE PCD 12V 100Ah Deep Cycle Battery delivers strong and reliable power for many applications. It offers a larger 100Ah capacity for extended use. This helps engines, systems, and devices run longer between charges. Users experience dependable energy when needed most. Moreover, the PCE PCD Deep Cycle Battery uses a deep cycle design built for repeated discharge and recharge. It supports long-term use without damage. This increases the battery’s lifespan and reduces replacements. Performance remains consistent over time. In addition, the battery provides a stable 12 V output for balanced power delivery. It suits solar systems, RVs, marine setups, and backup power solutions. Power stays steady for lights and appliances. Daily use becomes more efficient. Furthermore, the PCE PCD 12V 100Ah Deep Cycle Battery features a rugged casing that protects internal cells. The strong build resists wear and harsh conditions. This helps maintain performance in many environments. Durability feels reassuring. Also, the battery supports deep discharge recovery for long service life. It recovers well after heavy use cycles. This improves energy storage and reliability. Users rely on strong power anytime. In addition, the PCE PCD Deep Cycle Battery is easy to install in compatible racks and holders. Connections stay secure and simple. Setup feels user-friendly for both beginners and professionals. Installation remains smooth. Furthermore, the PCE PCD Deep Cycle Battery performs steadily across varying temperatures. It stays reliable in moderate heat and cold. This makes it ideal for outdoor and mobile use. Overall, the PCE PCD 12V 100Ah Deep Cycle Battery delivers dependable power, long life, and robust performance. It fits homes, boats, RVs, and solar systems. This battery is perfect for users who want strong, lasting deep cycle energy every day. Specifications: Voltage : 12V Capacity : 100Ah
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
The MSI MAG B860 Tomahawk WiFi ATX motherboard provides a high‑performance foundation for gaming and productivity systems. It supports Intel Core Ultra Series 2 processors on the LGA 1851 socket and uses the Intel B860 chipset to deliver reliable performance. This board also supports fast DDR5 memory with high overclocking speeds, which helps improve system responsiveness and multitasking. Moreover, this motherboard includes PCIe 5.0 and PCIe 4.0 expansion slots for modern graphics cards and storage devices. It also provides three M.2 slots and four SATA 6G ports for a wide range of storage options. Built‑in Wi‑Fi 7 and Intel Killer E5000 5Gbps LAN ensure fast wireless and wired networking. Thunderbolt 4 support adds high‑speed connectivity for external devices. Specifications: Supports Intel Core Ultra Series 2 processors on LGA 1851 socket for strong compatibility and performance. Four DDR5 memory slots with high‑speed overclocking support for responsive multitasking. PCIe 5.0 x16 and PCIe 4.0 slots with three M.2 and four SATA 6G storage interfaces. Intel Killer BE1750x Wi‑Fi 7 and 5Gbps LAN for fast wireless and wired networking. Thunderbolt 4 support for high‑speed external device connectivity.
MSI MPG Z890 CARBON WIFI Motherboard is a high-end ATX motherboard designed for Intel Core Ultra processors on the LGA 1851 platform. It focuses on strong performance, fast connectivity, and advanced cooling features. MSI MPG Z890 CARBON WIFI delivers a premium foundation for gaming and high-performance PC builds. In addition, it supports Intel Core Ultra Series 2 processors with the Z890 chipset. It also supports up to 256GB DDR5 memory with speeds reaching 9200+ MT/s (OC). Moreover, it includes PCIe 5.0 support for graphics cards and next-generation SSDs. Furthermore, it features up to five M.2 slots for high-speed NVMe storage expansion. It also supports Thunderbolt 4 ports for fast data transfer and external display output. In addition, it includes dual LAN with 5G and 2.5G plus Wi-Fi 7 for advanced networking performance. In addition, it is built with an advanced VRM power design and reinforced thermal solutions for stable performance under load. It also includes multiple heatsinks and M.2 cooling covers for better temperature control during heavy workloads. Finally, it uses a premium layout with strong expandability, making it suitable for gaming, content creation, and AI-ready systems. MSI MPG Z890 CARBON WIFI Motherboard delivers top-tier performance, connectivity, and stability for modern Intel builds. Specifications: Intel Z890 chipset for Core Ultra processors Up to 256GB DDR5 with 9200+ MT/s overclocking PCIe 5.0 support for GPU and storage Wi-Fi 7 with dual 5G and 2.5G LAN Thunderbolt 4 and up to 5x M.2 slots
The Royal Kludge RK61 is an ultra-compact 60% mechanical gaming keyboard featuring brilliant RGB backlighting and smooth, linear RK Red switches. Equipped with versatile triple-mode connectivity (Bluetooth, 2.4GHz wireless, and USB-C wired), it offers maximum flexibility and a clean, cable-free desktop layout optimized for both competitive gaming and office productivity. ✅ Full Specifications: Model: Royal Kludge RK61 (61 Keys) — Black Edition Interface / Connection: Triple Mode Connection (3C): Wireless 2.4GHz (via included USB dongle) Bluetooth 5.1 (Pairs with up to 3 devices simultaneously) Wired USB Type-C (Detachable cable included) Interface / Connection: Triple Mode Connection (3C): Wireless 2.4GHz (via included USB dongle) Bluetooth 5.1 (Pairs with up to 3 devices simultaneously) Wired USB Type-C (Detachable cable included) Switch Type: RK Red Mechanical Switches (Linear feel, smooth and quiet keystrokes, ideal for fast-paced gaming and quiet office typing) Hot-Swappable PCB: Yes (Supports easy replacement of 3-pin or 5-pin switches without soldering) Layout: Compact 60% Minimalism Layout, 61 Keys (US QWERTY / Arabic-English dual print variants supported) Backlighting: Full dynamic RGB Backlight with 18 customizable lighting modes, 8 monochrome modes, and adjustable brightness/speed Material & Build: Durable ABS polymer housing with high-quality ergonomically curved keycaps to reduce hand fatigue Design & Form Factor: Compact, space-saving design with a built-in 8° ergonomic typing angle for optimal comfort Battery Capacity: 1450mAh rechargeable battery built-in (Up to 13 hours of continuous use with backlighting active, high standby efficiency) Compatibility: Windows, macOS, Android, iOS, Linux, and major gaming consoles Dimensions: Approx. 289 x 103 x 39 mm (11.4 x 4 x 1.6 inches) Weight: Approx. 0.50 kg (1.1 lbs)
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
This 1.8-meter DisplayPort to HDMI cable lets you connect a DisplayPort-enabled PC or laptop to an HDMI monitor, TV, or projector. It delivers clear high-definition video and reliable signal transmission, making it perfect for office work, presentations, and home entertainment. The DisplayPort to HDMI cable (1.8M) is a simple and reliable solution for connecting modern computers and laptops with a DisplayPort output to HDMI displays. Ideal for upgrading your setup, it supports high-quality video output for monitors, HDTVs, and projectors. With plug-and-play functionality and a durable build, it ensures stable performance for both professional and home use. DisplayPort to HDMI Connection for easy compatibility with HDMI screens 1.8M Cable Length ideal for desk and office setups High-Definition Video Output for clear and sharp visuals Plug & Play no drivers required Durable Connectors & Cable Build for long-term reliability Perfect for Work & Entertainment supports monitors, TVs, and projectors Works with devices that have a DisplayPort output and displays with an HDMI input, including monitors, TVs, projectors, and display systems. Ideal for workstations, presentations, and dual-screen setups.
