APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
Key Features Output Connections (1) IEC 60320 C19 Input Connections Schuko CEE 7 / EU1-16P Cord Length 8.2ft (2.5meters) Power Cord, C19 to CEE/7 Schuko, 2.5m Wide selection of Rack PDU power cords for a variety of IT equipment. Specifications : Output Overload Protection No Maximum Total Current Draw 16 Input Input frequency 50/60 Hz Acceptable Input Voltage 90 – 250VAC Number of Power Cords 1 Maximum Input Current 16A Maximum Line Current 16A Physical Net Weight 0.49lbs. (0.22KG) Shipping weight 0.66lbs. (0.3KG) Shipping Height 2.01inches (51MM, 5.1CM) Shipping Width 4.02inches (102MM, 10.2CM) Shipping Depth 7.99inches (203MM, 20.3CM) Color Black Environmental Operating Temperature 32 – 113 °F (0 – 45 °C) Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 10000ft (0 – 3048meters) Storage Temperature -25 – 65 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0 – 50000ft (0 – 15240meters) manufacturer link
Specifications : -True Double-Conversion Online UPS – Mircoprocessor control optimizes reliability – Input power factor correction – Output Power Factor 0.80. – Wide input voltage (110V – 300V) – Converter mode available – ECO mode for enegry saving (Only available for 1 – 3 KVA) – Generator compatible – Adjustable battery number only available for 6K and up models – Smart SNMP works well with either USB or RS-232 together – Emergency power off function (EPO) only available for 6K / 10K models – Optional isolation transformer available. manufacturer link
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
Description : The Professional Series (1P/1P) – Tower is an advanced, affordable on-line double-conversion technology single-phase UPS system. Tower versions are available with 1000VA to 10000VA models and these offer high reliability for workstations, server and network equipment. The Professional Series is designed with automatic voltage regulation (AVR) to protect against power outages, disturbances and spikes. High voltage battery chargers and battery extension assembly is available for the long run time application. Key Features and Benefits True Double-Conversion Online UPS Mircoprocessor control optimizes reliability Input power factor correction Output Power Factor 0.80. Wide input voltage (110V – 300V) Converter mode available ECO mode for enegry saving (Only available for 1 – 3 KVA) Generator compatible Adjustable battery number only available for 6K and up models Smart SNMP works well with either USB or RS-232 together Emergency power off function (EPO) only available for 6K / 10K models Optional isolation transformer available. 02 Years Warranty manufacturer link
Specifications : Le grand ups keor spx 800va 310301 1year warranty ups 800va
PCE EX Online 3 KVA 2700W is a double-conversion online UPS designed for continuous and stable power protection. It is used for sensitive equipment such as servers, network systems, and critical office devices that require uninterrupted electricity. In addition, PCE EX Online 3 KVA 2700W uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers clean and stable pure sine wave output for safe operation of connected devices. Furthermore, PCE EX Online 3 KVA 2700W supports a 3000VA / 2700W capacity rating. As a result, it can handle high-load systems such as multiple PCs and networking equipment. It also maintains consistent voltage regulation for sensitive electronics during unstable power conditions. In addition, PCE EX Online 3 KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, voltage fluctuations, and power failures. Moreover, it is designed for long-duration reliability in professional environments. Overall, PCE EX Online 3 KVA 2700W delivers strong performance, zero-interruption switching, and high-level protection for critical power backup needs. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive devices Advanced protection against overload and faults
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
The Yuasa SWL2500T Industrial VRLA Battery delivers reliable power for industrial and backup applications. First, it provides consistent energy output for critical equipment and systems. In addition, the valve-regulated lead-acid (VRLA) technology ensures maintenance-free operation and extended service life. Moreover, the battery features durable construction, vibration resistance, and high discharge efficiency for demanding environments. The compact design allows easy installation in various setups. Finally, its dependable performance, safety features, and long-term reliability make it ideal for industrial, UPS, and emergency power systems. Specifications: VRLA Technology: Maintenance-free operation with long service life High Discharge Efficiency: Reliable power for critical equipment Durable Construction: Resistant to vibration and harsh environments Compact Design: Easy installation in various industrial setups Industrial Reliability: Ideal for UPS, backup, and emergency power
The Twist Line Interactive UPS 1500VA TWUP1500/LI provides backup power protection for computers, networking devices, and office equipment. It uses line interactive technology with automatic voltage regulation for stable output performance. Additionally, the built-in dual 12V/7Ah batteries support continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear power monitoring and system alerts. It also supports overload and short-circuit protection for safer daily operation. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits home and office environments easily. The system also supports cold start functionality and simulated sine wave output for common electronic devices. Additionally, the automatic battery charging system improves operational reliability. Specifications: 1500VA line interactive UPS technology Built-in 2x12V/7Ah rechargeable batteries LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 1000 Nominal Power (W) 800 Standard Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 9.8 Long-run Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 4.1 INPUT Connection Type IEC 320-C14 Nominal Voltage 200/208/220/230/240 VAC Voltage Range 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range 45 ~ 70 Hz Power Factor >= 0.99 OUTPUT Connection Type 3 x Universal socket (PRO901WS) 2 x Universal socket (PRO901WL) Nominal Voltage 200/208/220/230/240 VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232* USB Port BATTERY Standard Model Type 12V / 9Ah Numbers 2 Typical Recharge Time 4 hours recover to 90% capacity Long-run Model Type Depending on the capacity of external batteries Number 2 or 3 Charging Current (max) 1A / 2A / 4A / 6A Adjustable manufacturer link
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
【2021 New 60W PD Version】This well-rececived large power bank is now back with 2 high-speed USB-C PD ports to refresh your portable charging experience. USB-C (1) port can transfer up to 60W power to your laptop while USB-C (2) port can keep your phones charged at a maximum speed of Max. 27W on the go. 【Massive Capacity】Packed with a enormous capacity of 72000mAh/266Wh as well as battery management system, this portable charger can pump out enough power to multiple devices simultaneously and securely at a high power conversion rate up to 90%. (Note: not TSA-approved, not allowed on a plane) 【Off-Grid Power for CPAP】The high-performing DC 12V/5A (150W max.) cigarette lighter port is ready to boost most CPAP machines on the market with a CPAP adapter (PURCHASED SEPARATELY), including Philips Dreamstation, Resmed Airsense/Aircurve 10, and Resmed S9. Please turn OFF the heater & the humidifier for extended runtime. 【Faster Recharging】Recharge the battery pack at full-speed via a solar panel with the two-way DC port in 3-4 hours, and the two-way USB-C (1) port in 5-6 hours. Please note that the USB-C (1) port and the DC port CANNOT be used at the same time. 【10W Wireless Charging】Align your smartphone to the charging pad to get rid of cords jumbled in your bag. The smart indicator allows you to keep taps on real-time charging status effortlessly. DOES NOT support wireless earbuds, smartwatches, and other low-power devices. https://www.renogy.com/content/files/Manuals/RC-P72000-01%202018.3.23.pdf
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
The Prosonic 2000mAh MINI DC UPS | GS-1018 provides stable backup power for routers, modems, CCTV cameras, ONU devices, and other low-power networking equipment during electricity outages. Its compact design fits easily beside networking devices while maintaining reliable operation for home and office setups. This mini UPS supports multiple DC output options, making it suitable for different electronic devices that require continuous power. The built-in safety protections help prevent overheating, overload, overcharging, and short circuits, which improves long-term reliability and device safety. In addition, the lightweight body allows easy placement in small spaces without adding clutter to your setup. The unit delivers dependable backup support for internet connectivity during load shedding or sudden power interruptions. Users can connect routers and communication equipment directly to maintain stable online access for work, streaming, online classes, or security monitoring systems. Key operating features include efficient power conversion, portable dimensions, and compatibility with common DC-powered devices. The Prosonic GS-1018 also offers a practical solution for users who need uninterrupted networking performance without using a large traditional UPS system. Moreover, the compact battery backup system helps reduce downtime while protecting connected devices from sudden shutdowns. Its easy plug-and-play setup makes installation simple for both home and small business users. Specifications: 2000mAh backup battery capacity for networking devices Supports routers, CCTV cameras, modems, and ONU devices Multiple DC output options for wider compatibility Built-in overload, short circuit, and overcharge protection INPUT : 100-240Vac 50/60Hz OUTPUT : 5V/9V/12V/USB port/POE port
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
