General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
Specifications : Le grand ups keor spx 1500va fr _310303 UPS 1500va
Specifications : Le grand ups keor spx 600va 310300 UPS 600va
The Beco GS3000 3000VA 1800W UPS delivers powerful backup power for demanding home, office, and business setups. It supports high-performance desktops, servers, and networking systems. This UPS helps prevent data loss and sudden shutdowns during power outages. Users enjoy dependable protection while working and gaming. Moreover, the Beco GS3000 3000VA 1800W UPS offers a strong 3000 VA capacity with 1800 W output power for heavy electrical loads. It keeps multiple devices powered longer during interruptions. This improves system stability and uptime. Reliability stays consistent under heavy use. In addition, the UPS features built-in surge protection for shielding electronics against voltage spikes. It guards your devices from electrical damage. This adds extra peace of mind during storms and unstable power. Protection remains strong and consistent. Furthermore, the Beco GS3000 3000VA 1800W UPS includes automatic voltage regulation to correct lows and highs. It balances voltage without manual input. As a result, connected systems receive steady power. This helps prolong device lifespan. Also, the UPS delivers reliable battery backup when electricity fails. You can save work and safely shut down devices before the battery runs out. This prevents data corruption and interruptions. Backup support feels dependable. In addition, the Beco GS3000 3000VA 1800W UPS includes clear LED indicators for easy status checks. You can monitor power and battery conditions at a glance. Monitoring becomes simple and intuitive. Users stay informed. Moreover, the UPS supports multiple output sockets for connecting many devices. This increases flexibility for busy workstations, servers, and media setups. You can protect key electronics with one unit. Furthermore, the Beco GS3000 3000VA 1800W UPS supports plug-and-play installation without complex steps. Setup is fast and stress-free for all users. Connections remain secure and organized. Also, the sturdy and compact design fits desks, shelves, and racks without taking much space. It blends well into office and home environments. Overall, the Beco GS3000 3000VA 1800W UPS delivers strong battery backup, surge protection, and steady voltage regulation. This UPS is ideal for users who need powerful and dependable power protection daily. Specifications: 3000VA, 1800W, LCD, Metal Case Input: 145-290 VAC Output: 230VAC 50/60HZ 12V 9AH *4pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
Specifications : High Reliability Advanced DSP (Digital signal processors) technology Variable speed fan Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Advanced digital parallel technology High Availability Wide input voltage range, 50 / 60 Hz frequency auto sensing Linear derating in low voltage input reducing battery discharging times, extending the service life of battery Dual-input design, supporting independent bypass Output power factor improved from 0.9 to 1, load capacity increased by 13% Flexible battery configuration (settable 16 – 20 pcs batteries) Charging voltage and current configured by demands Ability to switch on the UPS with batteries Settable delayed start time when mains power is restored, reducing the impact on power grid or generator Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output High Usability LCD+LED display, multi-functional keys operation, friendly human-machine interface Powerful background software for parameters configuration and online updating Compact internal layout, miniaturized the complete unit for small footprint High Intelligence Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% Energy Conservation and Environment Protection Active power factor correction (APFC), input power factor up to 0.99 High efficiency 95% (up to 98% in ECO mode) Automatic power On/Off according to the load capacity set by users Equipped with self-aging function
PCE UPS 2400VA Raad 1200W is a line-interactive UPS designed to protect computers, routers, and office equipment from power failures and unstable voltage. It provides stable backup power during outages and supports everyday device protection. In addition, it supports Automatic Voltage Regulation (AVR). Therefore, it stabilizes fluctuating input voltage without switching to battery mode. Moreover, it helps extend battery lifespan by reducing unnecessary discharge during minor voltage changes. It also delivers 1200W output capacity for connected loads. Furthermore, it uses simulated sine wave output. As a result, it ensures compatible backup performance for standard PCs and networking devices. It also supports external battery configurations, allowing extended backup time depending on setup. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and voltage irregularities. Moreover, it provides automatic switching between mains and battery mode for uninterrupted operation. Overall, PCE UPS 2400VA Raad 1200W delivers reliable backup power, stable voltage control, and essential protection for home and office environments. Specifications: 2400VA / 1200W capacity for PCs and office devices Line-interactive UPS with AVR voltage regulation Simulated sine wave output for stable operation External battery support for extended runtime Overload and voltage protection for connected devices
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Efficiency at Full Load 94.0 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Input voltage range for main operations 110 – 300 Adjustable (half load), 176 – 300V Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 3hour(s) Battery Charge Power (Watts) 373 Watts Runtime View Runtime Graph View Runtime Chart Communications & Management Interface Port(s) DB-9 RS-232, Intelligent Smart Slot, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 685MM, 68.5CM Maximum Width 190MM, 19.0CM Maximum Depth 374MM, 37.4CM Net Weight 54.0KG Shipping weight 66.0KG Shipping Height 910MM, 91.0CM Shipping Width 290MM, 29.0CM Shipping Depth 495MM, 49.5CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 (Non-condensing) % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Protection Class IP20 1 YEAR WARRANTY
Presentation High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. Lead time Usually in Stock General provided equipment Basic UPS signalling RS-232 cable CD with software Rack mounting brackets User manual USB cable Number of tare power 25 W Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size WS Physical number of rack unit 5U colour Black depth 61.5 cm height 21.95 cm net weight 78 kg USB compatible Yes width 43.8 cm Input network frequency 40…70 Hz number of input connectors 1 hard wire 3-wire (1P + N + E) input voltage limits 110…300 V adjustable (half load) 176…300 V inputvolt_other 220 V 240 V input voltage 230 V Output rated power in W 6000 W Maximum configurable power in W 6000 W output frequency 50/60 Hz +/- 3 Hz sync to mains outputvolt_other 220 V 240 V crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 bypass type Internal bypass (automatic and manual) curve equation Efficiency curve load maximum 100 % curve X-axis maximum 100 % curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage efficiency 94 % (full load) graph display 1 half load runtime 00:10:00 3000 W output voltage 230 V Maximum configurable power in VA 6000 VA rated power in VA 6000 VA Conformance product certifications CE standards IEC 62040-1-1 IEC 62040-1-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0…3000 m ambient air temperature for storage -15…60 °C Storage Relative Humidity Non-condensing 0…95 % storage altitude 0…15000 m acoustic level 55 dB show note OP temperature No IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery number of battery filled slots 0 number of battery free slots 0 Battery recharge time 3 h additional information Configurable for 220 : 230 or 240 nominal output voltage liquid value 0 battery curve D Battery power in VAH 1512 VAh runtime battery option SRV240RLBP-9A 1 3024 VAh SRV240RLBP-9A 2 4536 VAh SRV240RLBP-9A 3 6048 VAh SRV240RLBP-9A 4 7560 VAh SRV240RLBP-9A Communications & Management free slots 1 control panel Multifunction LCD status and control console alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency power off Yes manufacturer link 1 YEAR WARRANTY
The INVO INSR Stabilizer offers automatic voltage regulation for homes and offices. It supports single-phase input from 1000 VA to 5000 VA, covering multiple needs . Moreover, it features a clear LCD that shows input and output voltages. This stabilizer uses a sturdy metal cabinet to protect internal parts. Also, it adds a three-second power delay to protect connected devices . Therefore, your appliances start safely after power returns. It comes in models such as INSR1000, 1500, 2000, 3000, and 5000 VA. This range suits small PCs to mid-sized equipment and appliances . Additionally, installation is easy via wall mount or tabletop placement. Built-in protections include overvoltage, undervoltage, and overload safety. This helps prevent damage during electrical fluctuations. It also resists heat and short circuit events. Thus, it keeps both electronics and home safe. Thanks to its servo-controlled design, it delivers steady output within ±3%. Hence, your sensitive devices run smoothly and securely. It also operates quietly, ideal for offices and study rooms. Plus, it’s energy efficient and requires minimal maintenance. Furthermore, its LCD display and simple controls make setup fast. The stabilizer supports various uses like PCs, printers, routers, TVs, and appliances. In short, the INVO INSR Stabilizer combines solid performance, safety, and ease. Choose this device when you need dependable voltage control at home or office. Specifications: INSR300 INVO Automatic Voltage Regulator 3000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR200 INVO Automatic Voltage Regulator 2000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR150 INVO Automatic Voltage Regulator 1500VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR100 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR50 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
【2021 New 60W PD Version】This well-rececived large power bank is now back with 2 high-speed USB-C PD ports to refresh your portable charging experience. USB-C (1) port can transfer up to 60W power to your laptop while USB-C (2) port can keep your phones charged at a maximum speed of Max. 27W on the go. 【Massive Capacity】Packed with a enormous capacity of 72000mAh/266Wh as well as battery management system, this portable charger can pump out enough power to multiple devices simultaneously and securely at a high power conversion rate up to 90%. (Note: not TSA-approved, not allowed on a plane) 【Off-Grid Power for CPAP】The high-performing DC 12V/5A (150W max.) cigarette lighter port is ready to boost most CPAP machines on the market with a CPAP adapter (PURCHASED SEPARATELY), including Philips Dreamstation, Resmed Airsense/Aircurve 10, and Resmed S9. Please turn OFF the heater & the humidifier for extended runtime. 【Faster Recharging】Recharge the battery pack at full-speed via a solar panel with the two-way DC port in 3-4 hours, and the two-way USB-C (1) port in 5-6 hours. Please note that the USB-C (1) port and the DC port CANNOT be used at the same time. 【10W Wireless Charging】Align your smartphone to the charging pad to get rid of cords jumbled in your bag. The smart indicator allows you to keep taps on real-time charging status effortlessly. DOES NOT support wireless earbuds, smartwatches, and other low-power devices. https://www.renogy.com/content/files/Manuals/RC-P72000-01%202018.3.23.pdf
The Prosonic 2000mAh MINI DC UPS | GS-1018 provides stable backup power for routers, modems, CCTV cameras, ONU devices, and other low-power networking equipment during electricity outages. Its compact design fits easily beside networking devices while maintaining reliable operation for home and office setups. This mini UPS supports multiple DC output options, making it suitable for different electronic devices that require continuous power. The built-in safety protections help prevent overheating, overload, overcharging, and short circuits, which improves long-term reliability and device safety. In addition, the lightweight body allows easy placement in small spaces without adding clutter to your setup. The unit delivers dependable backup support for internet connectivity during load shedding or sudden power interruptions. Users can connect routers and communication equipment directly to maintain stable online access for work, streaming, online classes, or security monitoring systems. Key operating features include efficient power conversion, portable dimensions, and compatibility with common DC-powered devices. The Prosonic GS-1018 also offers a practical solution for users who need uninterrupted networking performance without using a large traditional UPS system. Moreover, the compact battery backup system helps reduce downtime while protecting connected devices from sudden shutdowns. Its easy plug-and-play setup makes installation simple for both home and small business users. Specifications: 2000mAh backup battery capacity for networking devices Supports routers, CCTV cameras, modems, and ONU devices Multiple DC output options for wider compatibility Built-in overload, short circuit, and overcharge protection INPUT : 100-240Vac 50/60Hz OUTPUT : 5V/9V/12V/USB port/POE port
The Invo Line Interactive UPS INLI Series is a power protection solution designed to provide backup power and voltage regulation for computers, networking equipment, and other electronic devices. It helps protect connected equipment from power interruptions, voltage fluctuations, and electrical disturbances. Therefore, it is suitable for home, office, and professional environments. The line interactive technology provides automatic voltage regulation to maintain stable power output while reducing the impact of unstable electricity. In addition, the series includes multiple capacity options from 750VA to 3000VA, allowing users to select a suitable model for their power requirements. As a result, it supports different setups ranging from personal computers to larger equipment. The system includes models with LED or LCD displays, built-in batteries, and external battery support depending on the selected capacity. Moreover, higher-capacity models provide extended backup options with additional battery configurations. Therefore, the INLI Series offers flexible solutions for different power backup needs. The workflow compatibility makes this UPS series suitable for protecting PCs, workstations, networking devices, and other sensitive electronics. In addition, the compact tower design and protection features help provide reliable operation during power events. Specifications: Capacity options: 750VA to 3000VA Technology: Line Interactive UPS with AVR Display options: LED or LCD depending on model Battery options: Built-in or external batteries Models available: INLI85, INLI100, INLI150, INLI200, INLI300 and more
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
MGE Eaton 5E Essential Plus 5E2000iUSB 2000VA UPS w/ Power Management USB Port
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
