The TP‑Link AC2300 Wireless MU‑MIMO Gigabit Router Archer C2300 gives reliable dual‑band Wi‑Fi for home 4K streaming, gaming, and many connected devices. It delivers speeds of up to 1625 Mbps on 5 GHz and 600 Mbps on 2.4 GHz. The router also uses MU‑MIMO so it can serve multiple devices at once without slowdowns. Smart Connect places devices on the best band automatically for smooth use. Archer C2300 has three high‑performance antennas and beamforming to spread Wi‑Fi signals farther across your space. In addition, RangeBoost improves signal detection for devices that are far from the router. The device also includes USB 3.0 and USB 2.0 ports for media sharing across your network. This router includes HomeCare security tools to help protect your network. HomeCare offers antivirus, parental controls, and quality of service (QoS) to keep your Wi‑Fi safe and responsive. Setup and management are easy with the TP‑Link Tether app for phones. Specifications: • Dual‑band AC2300 Wi‑Fi with up to 1625 Mbps (5 GHz) and 600 Mbps (2.4 GHz)• MU‑MIMO connects multiple devices at once without delay• Three high‑performance antennas with beamforming and RangeBoost• USB 3.0 and USB 2.0 ports for media sharing• HomeCare security with antivirus, parental controls, and QoS
Looking to enhance your network coverage and reliability? Meet the TP-Link AC1750 Wireless Ceiling Mount Access Point. This device is designed to provide exceptional Wi-Fi performance in various environments. Firstly, let’s talk about coverage. With its powerful antennas and high-gain antennas, the AC1750 ensures extensive coverage throughout your space. Say goodbye to dead zones and hello to uninterrupted connectivity. Moreover, installation is a breeze with its sleek ceiling mount design. Seamlessly blend the access point into your environment while optimizing signal strength and coverage. Transitioning to performance, experience blazing-fast Wi-Fi speeds with support for the latest wireless standards. Stream HD videos, play online games, and connect multiple devices simultaneously without any lag or buffering. Furthermore, the AC1750’s advanced management features allow for easy network customization and optimization. From bandwidth control to guest network management, take full control of your network with intuitive settings. In addition, with its PoE (Power over Ethernet) support, powering the access point is hassle-free. Simply connect it to your PoE-enabled switch or injector for convenient and clutter-free installation. In conclusion, the TP-Link AC1750 Wireless Ceiling Mount Access Point is the perfect solution for businesses, schools, and large homes seeking reliable and high-performance Wi-Fi coverage. Upgrade your network today and enjoy seamless connectivity throughout your space. Specifications: Interface : 2 × Gigabit Ethernet (RJ-45) Ports Frequency : 2.4GHz and 5GHz Security : 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA-PSK2
The TP-Link Deco X60 3-pack AX5400 Mesh Wi-Fi 6 System delivers fast and stable wireless coverage across large homes. First, this mesh system uses Wi-Fi 6 technology to provide speeds up to 5400 Mbps. Therefore, users can enjoy smooth streaming, fast downloads, and stable online gaming on many devices. In addition, the three Deco units create one unified wireless network. Devices automatically connect to the strongest signal as you move through your home. Moreover, OFDMA and MU-MIMO technologies improve efficiency and allow multiple devices to connect without reducing performance. Finally, the system offers strong network security and easy setup through the Deco mobile app. For example, users can manage devices, create guest networks, and control parental settings easily. The TP-Link Deco X60 3-pack AX5400 Mesh Wi-Fi 6 System helps maintain reliable and secure connectivity for modern smart homes. manufacturer link Specifications: AX5400 dual-band Wi-Fi 6 speeds up to 5400 Mbps for fast networking Mesh technology creates one seamless network across the entire home Coverage up to about 7,000 sq ft with the 3-pack system OFDMA and MU-MIMO support more connected devices efficiently WPA3 security and HomeShield features help protect the network
Struggling with dead zones and slow internet speeds in your home? Say goodbye to connectivity issues with the Cudy AX1800 Whole Home Mesh WiFi System. This innovative solution blankets your entire home with strong, reliable WiFi signals. With its advanced mesh technology, the Cudy AX1800 ensures seamless roaming capabilities. Move from room to room without experiencing any drops in signal strength or interruptions in your connection. Stay connected whether you’re streaming, gaming, or working from home. Setting up the Cudy AX1800 is quick and easy. Simply plug in the units, follow the intuitive setup instructions, and you’ll be up and running in no time. No technical expertise required! Experience lightning-fast speeds with WiFi 6 technology. The Cudy AX1800 delivers speeds of up to 1800Mbps, ensuring smooth and lag-free performance for all your devices. Stream in 4K, video chat with friends and family, and download large files with ease. Forget about buffering and slow loading times. With the Cudy AX1800, you can enjoy buffer-free streaming and lag-free online gaming experiences. Say hello to uninterrupted entertainment and productivity. Expand your WiFi coverage effortlessly by adding additional nodes to your network. Whether you have a small apartment or a large house, the Cudy AX1800 can be customized to meet your specific needs. Say goodbye to dead zones once and for all. In conclusion, the Cudy AX1800 Whole Home Mesh WiFi System offers a reliable, high-speed, and easy-to-use solution for improving your home connectivity. Say goodbye to WiFi dead zones and hello to seamless, uninterrupted internet access throughout your entire home. Specifications: Wi-Fi Speed : Up to 5Ghz 1201Mbps Antenna : 4 × Internal Omni-Directional Antennas Wireless Security : WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPA3 Interfaces : 1 × 1000/100/10Mbps WAN, 1 × 1000/100/10Mbps LAN
D-Link DGS-F1016 The D-Link DGS-F1016 16-Port Unmanaged Gigabit Switch series offer an economical way . for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds while reducing energy consumption and minimising noise output. The D-Link DGS-1016D 16-Port Unmanaged Gigabit Switch series offer an economical way for SOHO and Small-to-Medium Businesses. (SMB) to take advantage of Gigabit Ethernet speeds while reducing energy consumption and minimising noise output. Gigabit Connectivity The DGS-1016D switches bring the speed of Gigabit Ethernet to all ports for a truly high-speed network. If your network has a mix of legacy and modern connection interfaces, each port allows for standard Ethernet. Fast Ethernet, or Gigabit Ethernet connections. You have the latest technology available to every computer and device connected to your network. Improved Network Efficiency The DGS-1016D switches incorporate several advanced features to help simplify and improve network management and efficiency . Flow Control throttles connections to ensure reliability during heavy usage periods by reducing packet loss and wasteful data re-transmission. In addition, Storm Control and Port Isolation mitigate the effects of broadcast storms caused by rogue software and malware. which can propagate across the network and bring communication to a standstill. D-Link DGS-F1016 Innovative Design The DGS-1016D feature a durable, compact metal case alongside a fanless design allowing for improved heat dissipation while maintaining silent operation. The 16-Port Gigabit Unmanaged Switch series is small, lightweight, wall-mountable, and is ideal for any business with demanding requirements and a small budget. Green Technology D-Link DGS-F1016 The 16-Port Gigabit Unmanaged Switch series helps you conserve energy automatically through several methods. Link status detection automatically powers down ports that have no link, allowing the switches to save substantial amounts of power . by cutting power usage for unused ports or any ports connected to computers that have been shut down. Meanwhile, Energy-Efficient Ethernet (EEE) conserves energy by dynamically reducing power consumption when data activity is low. These environmentally friendly switches are also RoHS compliant, use recyclable packaging, and minimise the use of harmful substances. These green features combined, provide more energy savings and a longer product life, without sacrificing operational performance or functionality. Specifications: Specifications Type Unmanaged Number of ports 16 to 30 ports Main type of ports 1000BASE-T Gigabit Ethernet Switching capacity 48 Gbps Fanless D-Link Green 802.3az Energy-Efficient Ethernet support Form Factor Desktop Rackmountable Housing Metal 1 year warranty Manufacturer Link
Say goodbye to buffering and lag with the TP-Link AX1500 Wi-Fi 6 Router. This cutting-edge device is designed to supercharge your internet connection, delivering lightning-fast speeds and unparalleled reliability. With Wi-Fi 6 technology, experience a significant boost in performance compared to previous generations. Enjoy smoother streaming, faster downloads, and lag-free gaming for all your devices. Furthermore, the AX1500 Router’s advanced Beamforming technology ensures a more stable and efficient connection, even in crowded environments. Say farewell to dead zones and weak signals – every corner of your home will be covered. Transitioning to setup, enjoy hassle-free installation and management with the TP-Link Tether app. Set up your network in minutes, customize settings, and monitor device activity with ease, right from your smartphone. Moreover, with support for OFDMA and MU-MIMO technology, the AX1500 Router can handle multiple devices simultaneously, without sacrificing speed or performance. Stream, game, work, and browse without missing a beat. In addition, robust security features safeguard your network from online threats and intruders, giving you peace of mind while browsing the web. Protect your sensitive information and keep your family safe online. In summary, the TP-Link AX1500 Wi-Fi 6 Router is a game-changer for home networking. With its blazing-fast speeds, extensive coverage, and advanced features, it’s the perfect solution for modern households. Upgrade your internet experience today and enjoy seamless connectivity for all your devices. Specifications: Wi-Fi 6 WiFi Speeds : Up to 5GHz 1201Mbps WiFi Encryption : WPA2-PSK, WPA-PSK, WPA3- Personal, WPA2- Enterprise
The Cudy BE3600 Gigabit Wi-Fi 7 Router is a high-speed, next-generation router designed for seamless connectivity and ultra-fast performance. With Wi-Fi 7 technology, it delivers blazing-fast speeds, reduced latency, and enhanced stability, making it perfect for gaming, streaming, and smart home devices. Lightning-Fast Wi-Fi 7 Performance The Cudy BE3600 Router features the latest Wi-Fi 7 standard, providing faster speeds, improved efficiency, and lower interference than previous generations. With speeds of up to 3600 Mbps, you can enjoy smooth 4K/8K streaming, online gaming, and high-speed downloads without interruptions. Reliable Gigabit Connectivity Equipped with Gigabit Ethernet ports, this router ensures lightning-fast wired connections for gaming consoles, PCs, and smart TVs. Whether you prefer a stable wired connection or ultra-fast Wi-Fi, the Cudy BE3600 delivers consistent and reliable performance. Advanced Dual-Band Technology The dual-band Wi-Fi setup offers separate 2.4GHz and 5GHz channels, optimizing performance for all connected devices. The 2.4GHz band provides long-range coverage, while the 5GHz band offers high-speed data transfer for bandwidth-intensive tasks. Enhanced Security & Smart Features With advanced WPA3 encryption, the Cudy BE3600 protects your network from cyber threats. It also includes parental controls, guest network access, and QoS (Quality of Service) to prioritize bandwidth for essential devices. Why Choose the Cudy BE3600 Wi-Fi 7 Router? The Cudy BE3600 Gigabit Wi-Fi 7 Router is the perfect choice for fast, reliable, and secure internet. Whether you need lag-free gaming, smooth video streaming, or smart home connectivity, this router provides the ultimate wireless experience. Specifications: Chipset : BCM6764 CPU : 2.0 GHz Quad-Core, ARM Cortex-A7 ROM : 128MB RAM : 512MB Wireless : 5GHz (2882Mbps), 2.4GHz (688Mbps) Wi-Fi Streams : 2T2R (2×2 MIMO) Antennas : 5GHz (7.8dBi), 2.4GHz (5.2dBi)
Specifications : Plug Type EU, UK, US Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Interface 1 * 10/100Mbps LAN Port 1 * 10/100Mbps LAN/WAN Port Button WPS Button, Reset Button Antenna 4 * external Dimensions ( W x D x H ) 95.0 x 61.5 x 35.2mm WIRELESS FEATURES Frequency 2.4~2.4835GHz Signal Rate Up to 300Mbps (dynamic) Reception Sensitivity 270M: -69dBm@10% PER Transmit Power < 20 dBm (EIRP) Wireless Modes Repeater/WISP/Router/AP Wireless Security 64/128/152-bit WEP WPA-PSK / WPA2-PSK OTHERS Package Contents 1xWireless-N Repeater/Router/AP 1xRJ-45 Ethernet Cable 1xQuick Installation Guide Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing manufacturer link
The HPE Aruba Networking 2930F 24G PoE+ 4SFP+ Switch is a high-performance network solution for modern businesses. It’s built to handle demanding workloads with reliability and efficiency. This switch features 24 Gigabit Ethernet ports with Power over Ethernet Plus (PoE+). It can deliver power and data through a single cable, reducing clutter and simplifying your setup. Additionally, the 4 SFP+ uplink ports provide fast connectivity options for advanced networking needs. Setting up the HPE Aruba 2930F Switch is quick and easy. With Zero-Touch Provisioning, you can configure the switch without complex processes. It integrates seamlessly with existing Aruba solutions, ensuring smooth network management. The switch is designed to support smart businesses. It offers Layer 3 features, making it ideal for handling routing between different networks. This capability enhances network performance and ensures efficient data flow. Built for scalability, this switch is perfect for growing businesses. Its modular design allows you to expand your network as needed. With robust security features, you can protect sensitive data from potential threats. Energy efficiency is another standout feature of the HPE Aruba 2930F Switch. It uses advanced technologies to reduce power consumption, saving energy while maintaining top performance. Whether you need to power IP cameras, VoIP phones, or wireless access points, this switch is a dependable choice. Its PoE+ capability makes it versatile for various applications. Upgrade your network today with the HPE Aruba Networking 2930F 24G PoE+ 4SFP+ Switch. It’s reliable, scalable, and designed to meet modern business needs. Specifications: Power Consumption : 445W Max Ports : 24x Gigabit PoE+ RJ45, 4x SFP+ 1/10GbE Ports Latency : 1000 Mb Latency: < 3.8 µs, 10 Gbps Latency: < 1.6 µs Switching Capacity : 128 Gbps Throughput : Up to 95.2 Mpps PoE Capability : 370W PoE+
Specifications : Plug Type EU, UK, US Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Interface 1 * 10/100Mbps LAN/WAN Port Button WPS Button, Reset Button Antenna 2 * Internal external Dimensions ( W x D x H ) 80.2 x 52.5 x 57.3.0mm WIRELESS FEATURES Frequency 2.4~2.4835GHz Signal Rate Up to 300Mbps (dynamic) Reception Sensitivity 270M: -69dBm@10% PER Transmit Power < 20 dBm (EIRP) Wireless Modes Repeater/AP Wireless Security 64/128/152-bit WEP WPA-PSK / WPA2-PSK OTHERS Package Contents 1xWireless-N Repeater/AP 1xRJ-45 Ethernet Cable 1xQuick Installation Guide Environment Operating Temperature: 0°C~40°C (32°F~104°F) Storage Temperature: -40°C~70°C (-40°F~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing manufacturer link
Introducing the ASUS Z790-P PRIME WiFi Intel LGA 1700 ATX Motherboard – a powerful and user-friendly choice for your PC setup. Simple Setup: Installing the ASUS Z790-P PRIME WiFi motherboard is easy, even for beginners. Key Features: This motherboard supports Intel’s 12th Gen processors, offers WiFi connectivity, and has ample USB ports. Room for Expansion: With several slots and ports, there’s space for additional components and upgrades. Stay Connected: This motherboard ensures seamless connectivity with USB 3.2 Gen 2 and built-in WiFi. Steadfast Performance: ASUS’s commitment to quality ensures a stable and efficient computing experience. In conclusion, the ASUS Z790-P PRIME WiFi Intel LGA 1700 ATX motherboard is a reliable and efficient choice for your PC. Its straightforward installation, key features, expansion options, and connectivity make it an excellent choice. This motherboard guarantees stable and efficient computing, thanks to ASUS’s commitment to quality. Upgrade your PC with the ASUS Z790-P PRIME WiFi motherboard for a powerful yet straightforward computing experience. you can always check here and if you like to see other options you can check here ! Specifications: Enhance your PC with the ASUS Z790-P PRIME WiFi motherboard for powerful performance and easy setup. 1 year warranty
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
PCE UPS 2400VA Raad 1200W is a line-interactive UPS designed to protect computers, routers, and office equipment from power failures and unstable voltage. It provides stable backup power during outages and supports everyday device protection. In addition, it supports Automatic Voltage Regulation (AVR). Therefore, it stabilizes fluctuating input voltage without switching to battery mode. Moreover, it helps extend battery lifespan by reducing unnecessary discharge during minor voltage changes. It also delivers 1200W output capacity for connected loads. Furthermore, it uses simulated sine wave output. As a result, it ensures compatible backup performance for standard PCs and networking devices. It also supports external battery configurations, allowing extended backup time depending on setup. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and voltage irregularities. Moreover, it provides automatic switching between mains and battery mode for uninterrupted operation. Overall, PCE UPS 2400VA Raad 1200W delivers reliable backup power, stable voltage control, and essential protection for home and office environments. Specifications: 2400VA / 1200W capacity for PCs and office devices Line-interactive UPS with AVR voltage regulation Simulated sine wave output for stable operation External battery support for extended runtime Overload and voltage protection for connected devices
The PROLINK PRO1501SFC Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and office electronics. It helps maintain device operation during power interruptions and unstable electrical conditions. The UPS provides a 1500VA capacity and uses line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps correct voltage fluctuations and provides stable power for connected equipment. The PROLINK PRO1501SFC features super-fast charging technology that reduces battery recharge time after power outages. Moreover, this allows the UPS to recover faster and become ready for future power interruptions. The UPS includes protection features against overload, short circuit, surge, and battery discharge. Furthermore, these safety functions help protect connected devices from common electrical issues. The PROLINK PRO1501SFC provides reliable backup support for homes, offices, and small work environments. Therefore, it is suitable for computers, routers, CCTV systems, and other essential electronic devices. The UPS features a practical design for easy installation and daily use. In addition, its line interactive operation provides efficient power management while maintaining equipment protection. The PROLINK PRO1501SFC Super Fast Charging UPS combines 1500VA backup capacity, AVR technology, fast charging, and protection features. As a result, it provides a dependable power solution for everyday electronic equipment. manufacturer link Specifications: Capacity: 1500VA / 900W Technology: Line Interactive UPS with AVR Charging: Super Fast Charging Technology Protection: Overload, Surge, Short Circuit, Battery Protection Application: Computer, Network, and Office Equipment Backup
APC UPS Accessories SURT48XLBP APC Smart-UPS RT 48V 1/2KVA SURT models Battery Pack
Are you looking for a reliable power backup solution for your devices? The VSUN 10KVA 9000W Online UPS is here to meet your needs. This uninterruptible power supply ensures your equipment stays powered, even during outages. First and foremost, the VSUN 10KVA Online UPS provides robust power protection. It keeps your devices running smoothly by preventing data loss and hardware damage. Whether you are using it for home or office, it guarantees continuous power supply. Moreover, this UPS boasts high efficiency. With its 9000W capacity, it can handle multiple devices simultaneously. This feature makes it an ideal choice for computers, servers, and other critical equipment. Another advantage is its online double conversion technology. This ensures a stable and clean power output, free from fluctuations. Your devices receive constant voltage and frequency, which extends their lifespan. Additionally, the VSUN 10KVA 9000W Online UPS comes with an intuitive LCD display. This screen provides real-time information about the UPS status. You can easily monitor input and output voltage, battery level, and load capacity. Furthermore, this UPS features a compact and sleek design. It fits seamlessly into any environment without taking up much space. Its user-friendly interface makes it easy to install and operate. In terms of safety, the VSUN 10KVA Online UPS is top-notch. It includes multiple protection features, such as overload, short circuit, and over-temperature protection. These safeguards ensure your devices are always protected. In conclusion, the VSUN 10KVA 9000W Online UPS is a dependable and efficient power backup solution. It offers robust protection, high efficiency, and user-friendly features. Invest in the VSUN 10KVA Online UPS to keep your devices safe and operational at all times. Specifications: Rating : 10KVA Power Output : 9000W
V-Link VL13500 is a compact mini UPS designed to keep routers, modems, and small electronics running during power cuts. It provides automatic backup power switching to prevent device shutdown when electricity drops. Additionally, it uses a built-in lithium battery with around 13500mAh capacity depending on the variant. It supports multiple DC output voltages such as 5V, 9V, and 12V for different devices. Moreover, it includes protection features like overcharge, over-discharge, and short-circuit protection. These safety functions help protect both the UPS and connected devices. Furthermore, it is commonly used for WiFi routers, CCTV cameras, and network equipment where stable power is required. The V-Link 13500mAh Mini UPS VL13500 provides reliable backup power for small network and electronic devices during outages. Specifications: 13500mAh lithium battery backup Supports 5V / 9V / 12V output Automatic power switching during outages Built-in safety protection system Designed for routers and CCTV devices
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
The Eaton 5E Gen2 UPS 1200VA 660W provides reliable power backup for your electronic devices. It’s designed to protect your equipment from unexpected power outages, surges, and voltage fluctuations, ensuring uninterrupted performance. With a 1200VA /660W capacity, the Eaton 5E UPS is perfect for safeguarding your home office devices, including computers, routers, and modems. It ensures that your critical systems stay operational when you need them the most. The compact design of the Eaton 5E UPS makes it a great fit for small spaces. Its lightweight and slim profile allows it to be easily placed under a desk or on a shelf, providing protection without taking up much space. This UPS features automatic voltage regulation (AVR), which stabilizes power levels to protect your equipment from voltage spikes. This ensures your devices run smoothly, even when power conditions are unstable. Setting up the Eaton 5E Gen2 UPS is simple and hassle-free. It comes with multiple outlets to connect your essential devices, giving you peace of mind during power interruptions. With an efficient battery backup system, the Eaton 5E UPS offers enough time to safely shut down your devices or switch to an alternative power source. This minimizes the risk of data loss or equipment damage. In conclusion, the Eaton 5E Gen2 UPS 1200VA 660W is a cost-effective and reliable solution for protecting your electronic devices from power disruptions. Invest in the Eaton 5E Gen2 today and ensure continuous power for your essential equipment. Specifications: Rating : 1200VA 660W Technology : Line Interactive Connection : 2 Outlets
Msi PRO B760M-A WIFI DDR4 CHIPSET INTEL B760 CPU SUPPORT Supports 12th/13th Gen Intel® Core™ Processors, Pentium® Gold and Celeron® Processors LGA 1700 MEMORY 4x DDR4, Maximum Memory Capacity 128GB Memory Support 5333(OC)/ 5200(OC)/ 5066(OC)/ 5000(OC)/ 4800(OC)/ 4600(OC)/ 4400(OC)/ 4266(OC)/ 4200(OC)/ 4000(OC)/ 3800(OC)/ 3733(OC)/ 3600(OC)/ 3466(OC)/ 3400(OC)/ 3333(OC)/ 3200(JEDEC)/ 2933(JEDEC)/ 2666(JEDEC)/ 2400(JEDEC)/ 2133(JEDEC) Max. overclocking frequency: • 1DPC 1R Max speed up to 5333+ MHz • 1DPC 2R Max speed up to 4800+ MHz • 2DPC 1R Max speed up to 4400+ MHz • 2DPC 2R Max speed up to 4000+ MHz Supports Dual-Channel mode Supports non-ECC, un-buffered memory Supports Intel® Extreme Memory Profile (XMP) ONBOARD GRAPHICS 2x HDMI™ 2x DisplayPort Support HDMI™ 2.1, maximum resolution of 4K 60Hz* Support DP 1.4, maximum resolution of 4K 60Hz* *Available only on processors featuring integrated graphics. Graphics specifications may vary depending on the CPU installed. EXPANSION SLOT 2x PCI-E x16 slot 1x PCI-E x1 slot PCI_E1 PCIe 4.0 supports up to x16 (From CPU) PCI_E2 PCIe 3.0 supports up to x1 (From Chipset) PCI_E3 PCIe 4.0 supports up to x4 (From Chipset) STORAGE 2x M.2 slot M.2_1 (From CPU) supports up to PCIe 4.0 x4 , supports 2280/2260/2242 devices M.2_2 (From Chipset) supports up to PCIe 4.0 x4 / SATA mode, supports 2280/2260/2242 devices 4x SATA 6G port * SATA8 will be unavailable when installing M.2 SATA SSD in the M2_2 slot. RAID Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA storage devices USB 2x USB 2.0 (Rear) 4x USB 2.0 (Front) 2x USB 3.2 Gen1 Type A (Rear) 4x USB 3.2 Gen1 Type A (Front) 1x USB 3.2 Gen1 Type C (Front) 2x USB 3.2 Gen2 Type A (Rear) LAN Realtek® RTL8125BG 2.5G LAN WIRELESS / BLUETOOTH Intel® Wi-Fi 6E The Wireless module is pre-installed in the M.2 (Key-E) slot Supports MU-MIMO TX/RX, 2.4GHz / 5GHz / 6GHz* (160MHz) up to 2.4Gbps Supports 802.11 a/ b/ g/ n/ ac/ ax Supports Bluetooth® 5.3, FIPS, FISMA * Wi-Fi 6E 6GHz may depend on every country’s regulations and will be ready in Windows 10 build 21H1 and Windows 11. AUDIO Realtek® ALC897 Codec 7.1-Channel High Definition Audio INTERNAL I/O 1x Power Connector(ATX_PWR) 2x Power Connector(CPU_PWR) 1x CPU Fan 1x Pump Fan 2x System Fan 2x Front Panel (JFP) 1x Chassis Intrusion (JCI) 1x Front Audio (JAUD) 1x Com Port (JCOM) 2x Addressable V2 RGB LED connector (JARGB_V2) 1x RGB LED connector(JRGB) 1x TPM pin header(Support TPM 2.0) 4x USB 2.0 4x USB 3.2 Gen1 Type A 1x USB 3.2 Gen1 Type C Specifications: Msi PRO B760M-A WIFI DDR4 Chipset INTEL B760 Cpu Support Supports 12th/13th Gen Intel® Core™ Processors, Pentium® Gold and Celeron® ProcessorsLGA 1700 Memory 4x DDR4, Maximum Memory Capacity 128GB 1 year warranty
The PANPOWER UPS 1800 VA is designed to provide reliable backup power and protection for computers, networking devices, office equipment, and other sensitive electronics. It helps maintain stable operation during power interruptions and voltage fluctuations. With an 1800VA capacity and 720W power output, this UPS provides dependable backup support for home and professional environments. Additionally, it delivers pure sine wave output to provide clean and stable power for compatible devices. The UPS supports 220/230/240 VAC input and output voltage, making it suitable for standard electrical environments. Moreover, its fast transfer time helps reduce interruptions when switching to battery power during outages. The PANPOWER UPS 1800 VA includes two internal 12V 9Ah batteries for backup operation. Furthermore, the sealed lead-acid battery design provides a practical solution for maintaining power availability during short interruptions. Protection features help safeguard connected equipment from unstable power conditions. Therefore, the UPS is suitable for devices such as desktop computers, routers, surveillance systems, and other electronics that require reliable power support. The compact design allows easy installation in different workspaces. In addition, the pure sine wave output makes it compatible with equipment that requires consistent and clean electrical power. The PANPOWER UPS 1800 VA combines backup capability, stable output performance, and protection features in a practical power solution. As a result, it helps users maintain equipment operation and reduce the risk of power-related interruptions. Manufacturer link Specifications: Capacity: 1800VA / 720W Input Voltage: 220/230/240 VAC Battery: 2 x 12V 9Ah sealed lead-acid batteries Output Waveform: Pure Sine Wave Transfer Time: 0.4 milliseconds
The ProLink PRO851SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep essential devices operating during short power interruptions and unstable electrical conditions. The UPS provides an 850VA capacity and features line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize voltage fluctuations and protects connected devices from overvoltage and undervoltage conditions. The ProLink PRO851SFCU features super-fast charging technology that significantly reduces battery recharge time after power outages. Moreover, this feature helps ensure the UPS is ready for future interruptions more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PRO851SFCU includes LED status indicators that allow users to monitor operating conditions easily. Therefore, users can quickly check power status, battery mode, and system operation. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides dependable backup support for desktop computers, routers, CCTV systems, and other important electronic devices. The ProLink PRO851SFCU Super Fast Charging UPS combines backup power, fast battery charging, AVR technology, and safety features. As a result, it provides a practical and reliable power protection solution for everyday use. Specifications: Capacity : 850VA Input : 230VAC Output : 230VAC Input Voltage : 510W Transfer Time : 2ms Battery Type : 12V/10Ah x1 Backup Time : 10-30 Min Part Number : PRO851SCFU
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The PANPOWER UPS GS 10 KVA is designed to provide reliable power protection for critical equipment in commercial, industrial, and professional environments. It delivers stable backup power for servers, networking systems, industrial equipment, and other sensitive electronics. With a 10000VA capacity and 8000W output power, this UPS provides high-capacity power support for demanding applications. Additionally, it uses a true online double-conversion design to continuously regulate and filter incoming power before delivering it to connected devices. The UPS provides pure sine wave output to ensure clean and stable power delivery. Moreover, its wide input voltage range and compatibility with generator power help maintain reliable operation in different electrical environments. The PANPOWER UPS GS 10 KVA supports external battery configurations for extended backup duration. Furthermore, the flexible battery design allows users to adjust backup capacity according to installation requirements. Protection features include safeguards against overload, short circuits, input voltage issues, and battery-related problems. Therefore, the UPS helps protect important equipment from unstable power conditions and unexpected interruptions. The system includes monitoring and communication options for easier management. In addition, available interfaces such as RS232, USB, and optional SNMP support allow users to monitor UPS status and operating information. The PANPOWER UPS GS 10 KVA combines high-capacity power backup, stable output performance, and advanced protection features. As a result, it is suitable for organizations that require dependable power continuity for essential systems. Manufacturer link Specifications: Capacity: 10000VA / 8000W UPS Type: True Online Double Conversion UPS Output Waveform: Pure Sine Wave Battery Support: External lead-acid or gel battery configuration Communication: RS232, USB, optional SNMP support
