PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
The Beco GP1500 1500VA 900W UPS delivers strong and reliable power protection for home and office electronics. It keeps computers, routers, and monitors running during outages. This helps prevent data loss and sudden shutdowns. Peace of mind increases with reliable backup power. Moreover, the Beco GP1500 1500VA 900W UPS offers 1500 VA capacity and 900 W output for high-demand systems. It supports larger desktops and entertainment setups easily. Backup power stays strong during interruptions. This improves system stability every day. In addition, the UPS features built-in surge protection to guard appliances from spikes and unstable power. This adds important defense against electrical damage. Devices remain safe during storms and fluctuations. Safety stays consistent. Furthermore, the Beco GP1500 1500VA 900W UPS includes automatic voltage regulation to smooth dips and spikes. It balances voltage without manual adjustment. This helps extend device lifespan. Consistent power improves performance. Also, the UPS delivers dependable battery backup when electricity fails. You can save files and shut down properly before power runs out. This reduces the risk of data loss. Backup support feels reassuring. In addition, the Beco GP1500 1500VA 900W UPS has clear LED indicators for power and battery status. You can check conditions easily at a glance. This makes monitoring simple and fast. Moreover, the UPS includes multiple output sockets for connecting several devices at once. This increases flexibility for busy workstations and entertainment centers. You can protect all critical electronics with one unit. Furthermore, the Beco GP1500 1500VA 900W UPS supports quick plug-and-play setup with no complex steps. Installation feels easy for any user. Setup remains fast and hassle-free. Also, the compact and sturdy design fits neatly into workspaces or shelves. It blends well into home and office environments. Portability stays practical. Overall, the Beco GP1500 1500VA 900W UPS delivers strong battery backup, surge protection, and voltage regulation. It ensures steady power and protects electronics effectively. This UPS is ideal for users needing reliable, high-capacity power protection every day. Specifications: 1500VA, 900W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The INVO INSR Stabilizer offers automatic voltage regulation for homes and offices. It supports single-phase input from 1000 VA to 5000 VA, covering multiple needs . Moreover, it features a clear LCD that shows input and output voltages. This stabilizer uses a sturdy metal cabinet to protect internal parts. Also, it adds a three-second power delay to protect connected devices . Therefore, your appliances start safely after power returns. It comes in models such as INSR1000, 1500, 2000, 3000, and 5000 VA. This range suits small PCs to mid-sized equipment and appliances . Additionally, installation is easy via wall mount or tabletop placement. Built-in protections include overvoltage, undervoltage, and overload safety. This helps prevent damage during electrical fluctuations. It also resists heat and short circuit events. Thus, it keeps both electronics and home safe. Thanks to its servo-controlled design, it delivers steady output within ±3%. Hence, your sensitive devices run smoothly and securely. It also operates quietly, ideal for offices and study rooms. Plus, it’s energy efficient and requires minimal maintenance. Furthermore, its LCD display and simple controls make setup fast. The stabilizer supports various uses like PCs, printers, routers, TVs, and appliances. In short, the INVO INSR Stabilizer combines solid performance, safety, and ease. Choose this device when you need dependable voltage control at home or office. Specifications: INSR300 INVO Automatic Voltage Regulator 3000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR200 INVO Automatic Voltage Regulator 2000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR150 INVO Automatic Voltage Regulator 1500VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR100 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs INSR50 INVO Automatic Voltage Regulator 1000VA, LCD Display ,Single Phase, Metal Cabinet, Delay 3 secs
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
The Twist Online High Frequency UPS 3KVA TWUP3000/HF delivers reliable backup power for servers, networking systems, and professional equipment. It uses online double conversion technology for continuous clean power output. Additionally, the high-frequency design improves efficiency and reduces power interruption risks. Moreover, the UPS includes an LCD display for real-time system monitoring and status alerts. It features internal 6x12V/9Ah batteries for backup operation during outages. Therefore, it helps protect sensitive devices from voltage fluctuations and sudden power loss. Furthermore, the TWUP3000/HF supports pure sine wave output for stable performance with critical equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 3KVA online double conversion UPS technology Internal 6x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
INVO Online INH300 Centralized server center, mainframe, network control center, computing center Full Specifications : 3KVA 2100 W Half -Load 120 -300VAC, Full -Load 165V -300VAC 45.5Hz ~ 54.5Hz 220/230/240V ± 3% Waveform True Sine wave Frequency 50/60Hz ± 0.5 Distortion <3%(linear Load); <5%(Non -linear Load) Crest Factor 3:1 Efficiency 85% Overload Capacity 110%-150%:Switch to Bypass after 1min; >150%:Shutdown afte r 200ms Short Circuit UPS output turn off and alarm RS232 ;SNMP (Optional) LCD & LED Utility, Inverter, Bypass, Battery, Load ,Battery Mode ,Frequency , UPS Fault Indicator Audible Alarm -Battery Discharge Utility Failure, Beep/4s;Battery Low, Beep/1s UPS Abnornmal Continuous Beep and Red Led On Noise <55db (1Meter) Temperature 0°C~40°C Humidity 10%~90% Optional 19 inch Rack -mount Dimension (W * D * H) mm 357 x 144 x 215 439x190x341 514X262X455 (Long Time Mode) 514x262x710 (Standard Model) Specifications: Specifications : INVO Online UPS High Frequency 3000 VA, LCD Display Inbuilt Battery 6 x 12V/7Ah AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1. AC Input 2. Bypass 3. AC Output 4. Battery 5. Fault 6. Screen 9. LCD 1 year warranty Manufacturer Link
The APC UPS Online Easy SRV 800W / 1 KVA SRV1KI delivers continuous, reliable power for critical equipment. First, it provides pure sine wave output suitable for sensitive electronics. In addition, it protects devices from phttps://mojitech.net/shop/peripherals/ups-battery-backup/apc-smart-ups-rc-800w-1kva-sine-wave-lebanon/ower surges, spikes, and outages. Moreover, the UPS features a compact design for easy installation in offices or server rooms. Finally, the intuitive LCD interface allows real-time monitoring of battery status and load. The SRV1KI ensures uninterrupted operation and safeguards essential systems during power disruptions. Specifications: 800W / 1 KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design suitable for offices and server rooms LCD interface for monitoring battery and load status Ensures uninterrupted operation during power disruptions
The Twist Online High Frequency UPS 6KVA TWUP6000/HF provides continuous backup power for servers, networking systems, and critical equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It features internal 16x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and sudden power loss. Furthermore, the TWUP6000/HF supports pure sine wave output for sensitive electronic equipment. It also includes overload, short-circuit, and overheating protection for safer operation. Additionally, the tower design fits office, server room, and IT environments easily. Specifications: 6KVA online double conversion UPS technology Internal 16x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
The Twist Online High Frequency UPS 2KVA TWUP2000/HF provides continuous backup power for servers, workstations, and networking equipment. It uses online double conversion technology for stable and clean power delivery. Additionally, the high-frequency design improves efficiency and reduces transfer interruptions. Moreover, the UPS includes an LCD display for real-time monitoring and system alerts. It also features internal 4x12V/9Ah batteries for backup operation during outages. Therefore, it protects connected devices from voltage fluctuations, overloads, and power failures. Furthermore, the TWUP2000/HF supports pure sine wave output for sensitive electronics and professional equipment. It also includes overload, short-circuit, and surge protection for safer operation. Additionally, the compact tower design fits office, server room, and IT environments easily. Specifications: 2KVA online double conversion UPS technology Internal 4x12V/9Ah rechargeable batteries LCD display for real-time monitoring Pure sine wave output for stable power delivery Overload and short-circuit protection system
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
APC Easy UPS SRV, 1600 Watts / 2 KVA, Online double conversion, Sine wave, 230V, Multi-function LCD status and control console, Surge Protection and Filtering, Generator compatible, Management Software, USB, 2 years warranty Electronics and Battery
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
UPS HAWK 2000VA 2kva 1 year warranty
Specifications : Le grand ups keor spx 800va 310301 1year warranty ups 800va
The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
Eaton 5S UPS, 1500 VA, 900 W, Input: C14, Outputs: (4) C13, (4) C13 surge only, Tower General Topology Line-Interactive (AVR with Booster + Fader) Configuration Tower or under monitor Part Number 5S1500i Color Black Rating (VA/Watts) 1500/900 Dimensions (H x W x D, mm) 250 x 87 x 382 Weight (kg) 11.08 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 175V-275 V Nominal Voltage 230 V Operating Frequency 50-60 Hz autoselect Electrical Output Nominal Voltage 230 VAC Output voltage regulation 230 V +/- 10% Outlets (4) IEC-320-C13 (4) IEC-320-C13 surge only Communications Communication Ports HID-compliant USB port for automatic integration with most common operating systems (Windows Vista, 7 & 8, Linux, Mac OS X), cable supplied Environmental & Standards Audible Noise < 40 dB at 1 Meter Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1, IEC/EN 62040 -5 Markings CB Report, CE mark Data Line Protection Tel/Fax/Modem/Internet and Ethernet 2 Years Warranty manufacturer link
The APC Easy UPS 1200W / 2200VA BX2200MI-MS provides reliable backup power for critical devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected electronics against surges, spikes, and short outages. Moreover, the UPS features a compact design for easy installation in offices or home setups. Finally, the LCD panel allows real-time monitoring of battery and load status. The BX2200MI-MS ensures uninterrupted operation and protects essential systems during power interruptions. manufacturer link Specifications: 1200W / 2200VA line-interactive output for reliable device protection Protects electronics from surges, spikes, and outages Compact design suitable for office or home setups LCD panel for monitoring battery and load status Ensures uninterrupted operation during power interruptions
MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: Black. Specifications: MARSRIVA SMART MINI DC UPS 10000MAH Capacity: 10000mAh / 37Wh. Output Interface: USB-A Output: 5V at 2.4A, DC Output: 5V / 9V / 12V (selectable) at 1.5A, POE Output: 5V at 2.4A. Dimensions: 104.5 x 170 x 30.8 mm. Net Weight: 360g. Color: White.
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
