Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
APC Easy UPS On-Line SRV 10000VA 230V SRV10KI is a high-capacity online uninterruptible power supply designed for critical business infrastructure, servers, and data center environments. It provides continuous, clean, and stable power using true double-conversion technology. It delivers 10000VA / 10000W (approx.) power capacity for heavy-duty applications. Therefore, it can support multiple servers, networking equipment, and sensitive electronics during power failures or voltage fluctuations. In addition, it ensures uninterrupted operation for mission-critical systems. The UPS uses online double-conversion technology to fully isolate connected equipment from utility power disturbances. As a result, it provides consistent, regulated pure sine wave output at all times. It includes an LCD interface for real-time monitoring of system status, load, and battery conditions. Meanwhile, built-in protection features enhance system safety and operational reliability. APC designs the Easy UPS SRV series for enterprise-grade power protection. Therefore, this model is ideal for data centers, IT infrastructure, and critical business applications requiring maximum uptime. Manufacturer link Specifications: 10000VA high-capacity output Online double-conversion UPS system Pure sine wave power output LCD monitoring display Enterprise-grade power protection
APC UPS Accessories SURTRK APC Smart-UPS RT 19″ Rail Kit 1 – 2.2KVA
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
PCE EX Online 2 KVA 1800W is a double-conversion online UPS designed to deliver continuous and stable power protection for computers, servers, and sensitive electronic equipment. It ensures uninterrupted operation during outages and unstable voltage conditions. In addition, PCE EX Online 2 KVA 1800W uses true online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers a pure sine wave output for safe and stable power to connected devices. Furthermore, PCE EX Online 2 KVA 1800W supports a 2kVA / 1800W load capacity. As a result, it can handle multiple devices such as PCs, routers, and small servers. It also maintains stable voltage regulation for sensitive workloads. In addition, PCE EX Online 2 KVA 1800W includes advanced protection features. Therefore, it helps protect against overload, short circuits, and power fluctuations. Moreover, it is designed for consistent performance in professional and office environments. Overall, PCE EX Online 2 KVA 1800W delivers reliable, uninterrupted, and high-quality backup power for critical systems. Specifications: 2kVA / 1800W power capacity for multiple devices Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for safe device operation Protection against overload and voltage fluctuations
PCE UPS 2400VA Raad 1200W is a line-interactive UPS designed to protect computers, routers, and office equipment from power failures and unstable voltage. It provides stable backup power during outages and supports everyday device protection. In addition, it supports Automatic Voltage Regulation (AVR). Therefore, it stabilizes fluctuating input voltage without switching to battery mode. Moreover, it helps extend battery lifespan by reducing unnecessary discharge during minor voltage changes. It also delivers 1200W output capacity for connected loads. Furthermore, it uses simulated sine wave output. As a result, it ensures compatible backup performance for standard PCs and networking devices. It also supports external battery configurations, allowing extended backup time depending on setup. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and voltage irregularities. Moreover, it provides automatic switching between mains and battery mode for uninterrupted operation. Overall, PCE UPS 2400VA Raad 1200W delivers reliable backup power, stable voltage control, and essential protection for home and office environments. Specifications: 2400VA / 1200W capacity for PCs and office devices Line-interactive UPS with AVR voltage regulation Simulated sine wave output for stable operation External battery support for extended runtime Overload and voltage protection for connected devices
UPS PCE EXDC-2 MAX UPS Adapter for Cameras & Modems
The PCE PCD 12V 100Ah Deep Cycle Battery delivers strong and reliable power for many applications. It offers a larger 100Ah capacity for extended use. This helps engines, systems, and devices run longer between charges. Users experience dependable energy when needed most. Moreover, the PCE PCD Deep Cycle Battery uses a deep cycle design built for repeated discharge and recharge. It supports long-term use without damage. This increases the battery’s lifespan and reduces replacements. Performance remains consistent over time. In addition, the battery provides a stable 12 V output for balanced power delivery. It suits solar systems, RVs, marine setups, and backup power solutions. Power stays steady for lights and appliances. Daily use becomes more efficient. Furthermore, the PCE PCD 12V 100Ah Deep Cycle Battery features a rugged casing that protects internal cells. The strong build resists wear and harsh conditions. This helps maintain performance in many environments. Durability feels reassuring. Also, the battery supports deep discharge recovery for long service life. It recovers well after heavy use cycles. This improves energy storage and reliability. Users rely on strong power anytime. In addition, the PCE PCD Deep Cycle Battery is easy to install in compatible racks and holders. Connections stay secure and simple. Setup feels user-friendly for both beginners and professionals. Installation remains smooth. Furthermore, the PCE PCD Deep Cycle Battery performs steadily across varying temperatures. It stays reliable in moderate heat and cold. This makes it ideal for outdoor and mobile use. Overall, the PCE PCD 12V 100Ah Deep Cycle Battery delivers dependable power, long life, and robust performance. It fits homes, boats, RVs, and solar systems. This battery is perfect for users who want strong, lasting deep cycle energy every day. Specifications: Voltage : 12V Capacity : 100Ah
The Twist Line Interactive UPS 1500VA TWUP1500/LI provides backup power protection for computers, networking devices, and office equipment. It uses line interactive technology with automatic voltage regulation for stable output performance. Additionally, the built-in dual 12V/7Ah batteries support continued operation during power interruptions. Moreover, the UPS includes LED status indicators for clear power monitoring and system alerts. It also supports overload and short-circuit protection for safer daily operation. Therefore, it helps protect connected devices from voltage fluctuations and sudden outages. Furthermore, the compact tower design fits home and office environments easily. The system also supports cold start functionality and simulated sine wave output for common electronic devices. Additionally, the automatic battery charging system improves operational reliability. Specifications: 1500VA line interactive UPS technology Built-in 2x12V/7Ah rechargeable batteries LED indicators for power status monitoring Automatic voltage regulation for stable output Overload and short-circuit protection system
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 1000 Nominal Power (W) 800 Standard Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 9.8 Long-run Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 4.1 INPUT Connection Type IEC 320-C14 Nominal Voltage 200/208/220/230/240 VAC Voltage Range 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range 45 ~ 70 Hz Power Factor >= 0.99 OUTPUT Connection Type 3 x Universal socket (PRO901WS) 2 x Universal socket (PRO901WL) Nominal Voltage 200/208/220/230/240 VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232* USB Port BATTERY Standard Model Type 12V / 9Ah Numbers 2 Typical Recharge Time 4 hours recover to 90% capacity Long-run Model Type Depending on the capacity of external batteries Number 2 or 3 Charging Current (max) 1A / 2A / 4A / 6A Adjustable manufacturer link
The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
Specifications : Le grand ups keor spx 600va 310300 UPS 600va
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
The Yuasa SWL2500T Industrial VRLA Battery delivers reliable power for industrial and backup applications. First, it provides consistent energy output for critical equipment and systems. In addition, the valve-regulated lead-acid (VRLA) technology ensures maintenance-free operation and extended service life. Moreover, the battery features durable construction, vibration resistance, and high discharge efficiency for demanding environments. The compact design allows easy installation in various setups. Finally, its dependable performance, safety features, and long-term reliability make it ideal for industrial, UPS, and emergency power systems. Specifications: VRLA Technology: Maintenance-free operation with long service life High Discharge Efficiency: Reliable power for critical equipment Durable Construction: Resistant to vibration and harsh environments Compact Design: Easy installation in various industrial setups Industrial Reliability: Ideal for UPS, backup, and emergency power
APC Easy UPS On-Line SRV 3000VA 230V SRV3KI is a high-performance uninterruptible power supply designed to provide continuous power protection for servers, network equipment, data centers, and critical business systems. It uses true online double-conversion technology to deliver clean and stable power in demanding environments. The UPS provides 3000VA / 2400W power capacity. Therefore, it can support critical equipment during power outages, voltage fluctuations, and electrical disturbances. In addition, it helps maintain business continuity and equipment reliability. It features online double-conversion technology that continuously conditions incoming power. As a result, connected devices receive consistent and clean power regardless of utility power quality. The unit includes an LCD display for real-time monitoring and system management. Meanwhile, automatic bypass functionality helps maintain power delivery during specific operating conditions and maintenance events. APC designs the Easy UPS On-Line series for dependable power protection and efficient operation. Therefore, this model is ideal for servers, network infrastructure, security systems, and mission-critical applications. manufacturer link Specifications: 3000VA / 2400W power capacity Online double-conversion technology Pure sine wave output LCD status and monitoring display Reliable backup for critical systems
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
Specifications : Le grand ups keor spx 2kva 2000va 1200w ups 2kva 1 year warranty
In the realm of uninterruptible power supplies (UPS), the Fanshine FSUPS 2000VA 900W stands out as a dependable solution, offering a robust and efficient power backup for your electronic devices. Transitioning to its key features, the UPS Fanshine FSUPS 2000VA 900W excels in providing a substantial power capacity, ensuring that your critical electronics remain powered during unexpected outages. This UPS is designed to safeguard your equipment and data. Moreover, this power supply solution impresses with its compact design, making it suitable for various settings, from home offices to small businesses. The Fanshine FSUPS seamlessly integrates into your space without compromising on performance. In addition to its functionality, the FSUPS 2000VA 900W offers versatile connectivity options, including multiple outlets for various devices. This ensures a flexible and efficient setup, protecting a range of electronics from power fluctuations. Furthermore, Fanshine’s commitment to user-friendly design is evident in the FSUPS 2000VA 900W’s easy setup and clear indicators. This ensures that users can monitor the status of their power supply effortlessly. In conclusion, the Fanshine FSUPS 2000VA 900W redefines reliability in power backup solutions, combining substantial capacity, compact design, and user-friendly features. Elevate your protection against power interruptions effortlessly with the FSUPS 2000VA 900W – your trusted solution for uninterrupted power! Specifications Model : FSUPS2000VA Input Voltage : 145VAC~290VAC Output Voltage : 195VAC~255VAC Output Wave Form : PWM/DC Output Frequency : 50Hz Backup Time : 10 to 15 minutes Noise Level : <45dB Operating Temperature : 0-45 Celsius
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
The ProLink PRO851SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep essential devices operating during short power interruptions and unstable electrical conditions. The UPS provides an 850VA capacity and features line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize voltage fluctuations and protects connected devices from overvoltage and undervoltage conditions. The ProLink PRO851SFCU features super-fast charging technology that significantly reduces battery recharge time after power outages. Moreover, this feature helps ensure the UPS is ready for future interruptions more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PRO851SFCU includes LED status indicators that allow users to monitor operating conditions easily. Therefore, users can quickly check power status, battery mode, and system operation. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides dependable backup support for desktop computers, routers, CCTV systems, and other important electronic devices. The ProLink PRO851SFCU Super Fast Charging UPS combines backup power, fast battery charging, AVR technology, and safety features. As a result, it provides a practical and reliable power protection solution for everyday use. Specifications: Capacity : 850VA Input : 230VAC Output : 230VAC Input Voltage : 510W Transfer Time : 2ms Battery Type : 12V/10Ah x1 Backup Time : 10-30 Min Part Number : PRO851SCFU
Professional II Series (1P/1P) PROLiNK Professional II Series (1P/1P) is a single-phase UPS system using microprocessor controlled true online double conversion technology and it can be used to provide protection for critical loads especially on IT applications. High input power factor correction in the system improves efficiency and reduces overall losses.
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
