Specifications : GENERAL UPS Type : Tower Phase : Single phase with ground Rating (VA) : 2000 Nominal Power (W) : 1600 Standard Model Dimension (mm) : 397x 145 x 220 (D x W x H) Weight (kg) : 17 Long-run Model Dimension (mm) : 397 x 145 x 220 (D x W x H) Weight (kg) : 6.8 INPUT Connection Type : IEC 320-C14 Nominal Voltage : 200/208/220/230/240 VAC Voltage Range : 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range : 45 ~ 70 Hz Power Factor : >= 0.99 OUTPUT Connection Type : 3 x Universal socket (PRO902WS) 2 x Universal socket (PRO902WL) Nominal Voltage : 200/208/220/230/240 VAC Voltage Regulation : ±1% Frequency Range (Synchronized Range) : 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) : 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio : 3:1 Harmonic Distortion ; ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode : Sounding every 4 seconds Low Battery : Sounding every second Overload : Sounding twice every second Fault : Continuously sounding LCD : Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel : Status LED, Function keys, LCD display Communication : Smart RS232* USB : Port BATTERY Standard Model Type : 12V / 9Ah Numbers : 4 Typical Recharge Time : 4 hours recover to 90% capacity Long-run Model Type : Depending on the capacity of external batteries Number : 4/6/8 Charging Current (max) : 1A / 2A / 4A / 6A Adjustable REAR PANEL 1. AC Input 2. Input circuit breaker 3. USB Communication port 4. RS-232 communication port 5. Intelligent slot 6. External battery connection (Only available for L model) 7. Output receptacles
APC UPS Accessories SRVRK1 APC Easy UPS RAIL KIT, 700MM, 1 – 10KVA (Rackable SRV models)
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
PCE MX Online 3KVA 2700W is a high-performance online double-conversion UPS designed for critical power protection. It provides continuous, clean, and stable electricity for servers, network systems, and sensitive electronic equipment. In addition, PCE MX Online 3KVA 2700W uses true online double-conversion technology. Therefore, it delivers zero transfer time between mains and battery mode. Moreover, it provides pure sine wave output to ensure safe operation of connected devices. Furthermore, PCE MX Online 3KVA 2700W supports a 3000VA / 2700W load capacity. As a result, it can handle demanding setups such as multiple PCs and networking equipment. It also maintains stable voltage regulation under fluctuating input conditions. In addition, PCE MX Online 3KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, and power instability. Moreover, it is designed for professional environments that require uninterrupted power availability. Overall, PCE MX Online 3KVA 2700W delivers strong backup performance, zero-interruption switching, and reliable protection for critical systems. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive equipment Overload and short-circuit protection system
The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a powerful and reliable power backup solution. It ensures uninterrupted power for critical devices, protecting them from outages and fluctuations. This UPS uses advanced double-conversion technology for maximum power reliability. It provides consistent and clean power, making it perfect for sensitive equipment like servers, medical devices, and data centers. The Eaton 9E UPS delivers 6000VA (4800W) of capacity, making it suitable for high-load environments. Its robust design ensures consistent performance even during extended power outages. This makes it ideal for businesses that cannot afford downtime. Setting up the UPS is simple, and it integrates seamlessly into existing systems. It comes with an intuitive LCD interface, making monitoring and management straightforward. You can easily view critical information, such as load levels, battery status, and alerts. The Eaton 9E UPS also features a scalable runtime. You can add additional battery modules to extend backup time as your needs grow. This flexibility ensures long-term usability and value. With its compact footprint, the UPS saves space in your office or server room. Its energy-efficient design reduces operating costs while ensuring reliable performance. This UPS is equipped with advanced features, such as remote monitoring capabilities. Using Eaton’s management software, you can monitor and control the UPS from anywhere. The Eaton 9E UPS Online Double Conversion 6000VA 4800W is a reliable investment for protecting your critical systems. Ensure uninterrupted power for your business with this advanced and efficient UPS solution. Specifications: Wattage : 4800W VA Rating : 6000 VA
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
The Beco GP1200 1200VA 720W UPS delivers reliable power backup for home and office electronics. It keeps key devices running during outages. This helps prevent data loss and sudden shutdowns. Users gain peace of mind knowing devices stay protected. Moreover, the Beco GP1200 1200VA 720W UPS features 1200 VA capacity and 720 W output power for strong support. It handles computers, routers, modems, and monitors easily. Large systems stay powered long enough to save work. Performance stays stable and secure. In addition, the UPS includes built-in surge protection for reliable defense against voltage spikes. It guards appliances from unstable power conditions and electrical surges. This adds extra safety during storms or fluctuations. Protection stays consistent over time. Furthermore, the Beco GP1200 1200VA 720W UPS offers automatic voltage regulation without manual settings. It smooths voltage drops and spikes quickly. This helps connected devices run smoothly. Reliability increases in daily use. Also, the UPS provides battery backup when power fails. You can finish tasks and save important files before turning off systems. This reduces the risk of data corruption. Backup power feels dependable. In addition, the Beco GP1200 1200VA 720W UPS includes clear LED indicators for power and battery status. You can check performance at a glance. This helps monitor conditions with ease. Users stay informed during operation. Moreover, the UPS includes multiple output sockets for connecting more devices at once. This improves flexibility for busy workstations and entertainment setups. You can protect multiple electronics with one unit. Furthermore, the Beco GP1200 1200VA 720W UPS supports easy installation and quick setup. Users can connect devices without complicated steps. Setup remains simple for all users. Also, the compact design fits neatly on desks, shelves, or cabinets without taking much room. It blends well into home and office spaces. Portability stays practical. Overall, the Beco GP1200 1200VA 720W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. It guards electronics and ensures uninterrupted use. This UPS is ideal for users seeking reliable, everyday power protection. Specifications: 1200VA, 720W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 7.5AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
The ProLink PRO910WL Professional II Series Online UPS is designed to provide stable and reliable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power interruptions and protects connected devices from unstable electricity. The UPS provides a 10000VA capacity with an 8000W power rating. Additionally, it uses online double conversion technology to deliver clean and consistent power output for sensitive equipment that requires reliable energy support. The ProLink PRO910WL supports pure sine wave output for improved compatibility with different electronic devices. Moreover, its advanced power management system helps maintain stable voltage and frequency during changing power conditions. The UPS includes an LCD display that allows users to monitor important system information. Furthermore, the display provides details about input voltage, output voltage, battery status, load level, and operating conditions. The PRO910WL supports external battery configurations for extended backup time. In addition, it includes protection features against overload, short circuit, over-temperature, and battery-related issues to help protect connected equipment. The UPS is suitable for data centers, offices, industrial environments, and other locations that require dependable power backup. Therefore, it provides a practical solution for users who need continuous power protection for important systems. The ProLink PRO910WL Professional II Series Online UPS combines high power capacity, online protection technology, monitoring features, and safety functions. As a result, it delivers reliable backup power for critical applications. Specifications: Capacity: 10000VA / 8000W UPS Type: Online Double Conversion Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Battery Protection
The APC UPS 600W 1000VA Line Interactive BV1000I-GR provides reliable backup power for home and office devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected devices against surges, spikes, and short outages. Moreover, the compact design allows easy placement on desks or near electronics. Finally, the UPS includes LED indicators to monitor battery and load status. The BV1000I-GR ensures uninterrupted operation and protects important electronics during power interruptions. Specifications: 600W / 1000VA line-interactive output protects devices Safeguards against power surges, spikes, and outages Compact design for easy placement on desks or near electronics LED indicators monitor battery and load status Ensures uninterrupted operation during short power interruptions
UPS PCE VX / MXOnline 2KVA 1600W is a double-conversion online UPS designed for continuous protection of servers, PCs, and network systems. It delivers stable power during outages and voltage fluctuations. In addition, it uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers pure sine wave output for safe operation of sensitive equipment. Furthermore, it supports a 2KVA / 1600W load capacity. As a result, it can power multiple devices such as computers, routers, and small server setups. It also maintains stable voltage regulation under unstable input conditions. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and power instability. Moreover, it is designed for environments that require continuous uptime and reliability. Overall, UPS PCE VX / MXOnline 2KVA 1600W delivers stable backup performance, zero-interruption switching, and strong protection for critical systems. Specifications: 2KVA / 1600W capacity for professional equipment Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for stable devices Advanced protection against overload and faults
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
The PROLINK Enerhome PRO2000 Line Interactive UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions and unstable power conditions. The UPS provides a 2KVA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps correct voltage fluctuations and provides stable power output to improve equipment protection. The PROLINK PRO2000 features a line interactive design that allows quick switching to battery mode during power failures. Moreover, it provides efficient backup support for essential devices while reducing power-related risks. The UPS includes protection features against overload, short circuit, surge, and low battery conditions. Furthermore, these safety functions help protect connected equipment during different operating situations. The PROLINK Enerhome PRO2000 is suitable for homes, offices, and small workspaces that need dependable power backup. Therefore, it provides a practical solution for protecting computers, routers, and other important electronic devices. The compact design makes the UPS easy to install in different environments. In addition, its reliable performance helps users maintain stable operation during unexpected power interruptions. The PROLINK Enerhome PRO2000 2KVA Line Interactive UPS combines backup power, AVR voltage regulation, and protection features. As a result, it provides a reliable power solution for everyday electronic equipment. Specifications: Capacity: 2000VA / 1200W Technology: Line Interactive with AVR Protection: Overload, Short Circuit, Surge, Low Battery Protection Input Voltage: 220VAC Output Voltage: 220VAC
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
The Beco GP2000 2000VA 1200W UPS delivers dependable power protection for home, office, and business systems. It supports high-demand devices like desktops, servers, and networking equipment. This UPS helps prevent data loss and sudden shutdowns during power interruptions. Users enjoy peace of mind with reliable backup. Moreover, the Beco GP2000 2000VA 1200W UPS features a 2000 VA capacity and 1200 W output power for strong performance. It maintains stable power for multiple connected devices. This helps keep critical systems running longer during outages. Reliability stays consistent. In addition, the UPS includes built-in surge protection for safe operation against voltage spikes. It guards your electronics from unpredictable power surges. This adds extra defense during storms or unstable conditions. Device safety remains a priority. Furthermore, the Beco GP2000 2000VA 1200W UPS offers automatic voltage regulation to smooth dips and spikes. It balances fluctuating power automatically. This strengthens system reliability and helps extend equipment life. Power stays steady without manual changes. Also, the UPS provides battery backup when electricity fails. You can save work and shut down systems properly before power runs out. This reduces risk of data corruption. Backup power feels dependable and secure. In addition, the Beco GP2000 2000VA 1200W UPS includes easy-to-read LED indicators for power and battery status. You can check conditions at a glance. This makes monitoring clear and simple. Users stay informed during operation. Moreover, the UPS supports multiple output sockets for connecting several devices simultaneously. This increases flexibility for desks, workstations, and server setups. You can protect many electronics at once. Furthermore, the Beco GP2000 2000VA 1200W UPS supports easy installation with plug-and-play setup. Connections are marked clearly for simple use. Setup remains quick and stress-free. Also, the compact and sturdy design fits neatly on desks or shelves. It blends into home and office spaces easily. Portability stays practical. Overall, the Beco GP2000 2000VA 1200W UPS delivers strong battery backup, surge protection, and smooth voltage regulation. This UPS is perfect for users needing powerful and reliable power protection every day. Specifications: 2000VA, 1200W, LCD, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
Powerology Portable Power Generator,140400mAh Powerology 140400mAh Power Generator 500W Pure Sine-Wave Output -45W USB-C Power Delivery -18W USB-A Quick Charge -3.1A Dual USB Optimal Charge -220V UK AC Output -750W Max Surge
Specifications : Le grand ups keor spx 1500va fr _310303 UPS 1500va
The Yuasa SW280 Industrial VRLA Battery delivers dependable backup power for industrial systems. It uses Valve Regulated Lead Acid (VRLA) technology for safety and maintenance-free use. Also, its sealed design prevents leaks and allows flexible installation. First, this battery is built to last in tough environments. Moreover, it resists vibrations and shocks in heavy machinery settings. Therefore, it works well in factories, security systems, and telecom units. Second, the Yuasa SW280 provides high capacity and consistent performance. It delivers stable output during power outages or load changes. In addition, it supports long discharge times when needed. Consequently, your critical system stays operational without interruption. Also, this battery is easy to install and service. It fits standard industrial racks and cabinets. Plus, it has clear terminal markings for safe connection. Thus, technicians can install it quickly and correctly. Moreover, the VRLA design means no water topping up is required. Therefore, you avoid extra maintenance and reduce downtime. Furthermore, the sealed casing minimizes acid exposure risk. Hence, it is safer for indoor installations. Another key feature is reliable thermal performance. It operates well in temperatures from 0°C to 40°C. Also, it handles variations in industrial climates. Thus, it maintains long service life and consistent power. Importantly, Yuasa provides strong quality assurance. Their factories follow strict ISO standards for production. Also, full warranty coverage gives peace of mind. Hence, you can trust the battery for critical workloads. In summary, the Yuasa SW280 Industrial VRLA Battery combines durability, safety, and dependable power. Furthermore, its maintenance-free and sealed design adds convenience and protection. If you need a trusted industrial battery, this is an excellent choice. Specifications: Length (mm) : 151 Width (mm) : 65 Height (mm) : 97.5 Weight (kg) : 2.6 Nominal Voltage : 12
Onduleur tour Keor LP avec batterie avec 2 prises de courant 2P+T + 6 prises IEC 10A – 3000VA 2700W – port USB et RS232 1 YEAR WARRANTY
The PROLINK PRO1501SFCU Super Fast Charging UPS is designed to provide reliable backup power and voltage protection for computers, networking equipment, gaming systems, and office electronics. It helps keep essential devices operating during power interruptions and unstable electrical conditions. The UPS provides a 1500VA capacity and uses line interactive technology with Automatic Voltage Regulation (AVR). Additionally, AVR helps stabilize input voltage fluctuations and delivers safer power to connected devices. The PROLINK PRO1501SFCU features super-fast charging technology that significantly reduces battery recharge time after a power outage. Moreover, this feature ensures the UPS becomes ready for the next interruption more quickly. The UPS includes multiple protection functions against overload, short circuit, surge, and battery discharge conditions. Furthermore, these protection features help improve the safety and reliability of connected equipment. The PROLINK PRO1501SFCU includes LED status indicators and audible alarms for easier system monitoring. Therefore, users can quickly check operating conditions and power status during daily use. The compact design makes the UPS suitable for homes, offices, and small business environments. In addition, it provides dependable backup support for desktop PCs, routers, NAS devices, and CCTV systems. The PROLINK PRO1501SFCU Super Fast Charging UPS combines backup power, rapid battery charging, AVR technology, and advanced protection features. As a result, it provides a practical and reliable power protection solution for everyday applications. Specifications: Capacity : 1500VA Input : 140-230VAC Output : 230VAC Transfer Time : 2ms Battery Type : 12V Backup Time : 40 Min (Depending on the load) Part Number : PRO1501SFCU
UPS ONLINE 2KVA 1600W PURE SINEWAVE 1 YEAR WARRANTY
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
PCE CASA 1KVA inverter is a compact off-grid power solution designed for home and small office backup use. It helps keep essential devices running during power cuts, such as routers, lights, and small electronics. In addition, it provides pure sine wave output. Therefore, it delivers clean and stable power for sensitive devices. Moreover, it supports AC mains and generator input, which makes it flexible in different power conditions. Furthermore, PCE CASA 1KVA inverter includes smart battery charging control. As a result, it improves charging efficiency and helps extend battery life. It also supports automatic restart after power recovery, ensuring continuous operation. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and overheating. Moreover, it supports a cold start function for direct battery operation when no grid power is available. Overall, PCE CASA 1KVA inverter delivers reliable backup performance, stable output, and essential protection for everyday home and office energy needs. Specifications: 1KVA capacity for home and small office loads Pure sine wave output for stable device operation AC mains and generator input support Smart battery charging control for efficiency Built-in protection against overload and short circuit
Specifications : Output Max Configurable Power (Watts) 6.0kWatts / 6.0kVA Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage Efficiency at Full Load 94.0 % Output Voltage Distortion 1 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3 : 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 40 – 70 Hz Auto sensing Input voltage range for main operations 110 – 300 Half load, 176 – 300 Full loadV Efficiency at Full Load 94.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Typical recharge time 7hour(s) Nominal Battery Voltage 192 V Expected Battery Life (years) 3 – 5 Battery Charge Power (Watts) 235 Watts Runtime View Runtime Graph Communications & Management Interface Port(s) DB-9 RS-232, USB Control panel Multifunction LCD status and control console Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 600Joules Physical Maximum Height 173MM, 17.3CM Maximum Width 438MM, 43.8CM Maximum Depth 710MM, 71.0CM Net Weight 61.0KG Shipping weight 71.0KG Shipping Height 1232MM, 123.19CM Shipping Width 600MM, 60.0CM Shipping Depth 836MM, 83.6CM Color Black Environmental Operating Temperature 0 – 40 °C Operating Relative Humidity 0 – 95 % Operating Elevation 0 – 3000meters Storage Temperature -15 – 60 °C Storage Relative Humidity 0 – 95 (Non-condensing) % Storage Elevation 0 – 15000meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 1172.0BTU/hr Protection Class IP20 Conformance Approvals CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI Standard warranty 2 years repair or replace Sustainable Offer Status RoHS Compliant Warranty : 1 year https://www.apc.com/shop/dk/en/products/APC-Easy-UPS-On-Line-SRV-6000VA-RM-230V-with-Rail-Kit/P-SRV6KRIRK
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
APC UPS Accessories SRVRK2 APC Easy UPS RAIL KIT, 900MM, 1 – 10KVA (Rackable SRV models)
