TP-Link Omada SX3016F 16-Port 10GE SFP+ L2+ Managed Switch is a high-performance aggregation switch designed for full-fiber 10G enterprise and data center networks. It delivers ultra-fast switching capacity and advanced Layer 2+ features for large-scale network deployments. The TP-Link Omada SX3016F includes 16× 10GbE SFP+ slots, providing full-fiber connectivity for high-bandwidth environments. Therefore, it supports fast aggregation and backbone connections across enterprise networks. In addition, it delivers a non-blocking switching capacity of 320 Gbps for maximum throughput. Moreover, the TP-Link Omada SX3016F supports Layer 2+ and Layer 3 features such as VLAN, QoS, ACL, IGMP Snooping, and static routing. As a result, the TP-Link Omada SX3016F improves traffic control, security, and internal routing efficiency. The TP-Link Omada SX3016F also integrates redundant power supply support, helping maintain network uptime in case of power failure. Therefore, the TP-Link Omada SX3016F ensures higher reliability in critical environments. In addition, it supports ERPS for fast ring protection and recovery. It works with the Omada SDN platform for centralized cloud or controller-based management. Moreover, administrators can monitor and configure the TP-Link Omada SX3016F remotely across multiple sites. The fan design and rack-mountable metal chassis make it suitable for professional server racks. Finally, the TP-Link Omada SX3016F delivers full 10G fiber switching power, high reliability, and advanced managed networking for enterprise use. Specifications: Ports: 16× 10G SFP+ fiber slots Performance: 320 Gbps non-blocking switching capacity Management: L2+/L3 features with Omada SDN control Reliability: Redundant power supply support for uptime Features: VLAN, QoS, ACL, IGMP Snooping, and ERPS support
Gigabit Ethernet,1x Combo port SFP or Gigabit Ethernet 1xSFP The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip – the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port – a single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support – this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput – because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput. This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
The TP‑Link TL‑SG1008MP V2 8‑Port Gigabit Desktop/Rackmount Switch with 8‑Port PoE delivers dependable wired connectivity and power distribution for small business and home networks. First, it offers eight Gigabit Ethernet ports with PoE support on all ports, supplying data and power to devices like IP cameras, access points, and VoIP phones through a single cable. Therefore, it simplifies installation and reduces cable clutter. In addition, the TL‑SG1008MP V2 features a desktop or rackmount design that fits offices and network closets alike. Moreover, plug‑and‑play setup means no configuration or drivers are needed, making installation fast and easy. Finally, this switch ensures stable and efficient data transfer across connected devices. For example, you can power and connect security cameras and wireless APs without separate power adapters. Specifications: Eight Gigabit Ethernet ports with PoE to power IP cameras, APs, and VoIP devices Desktop or rackmount design for flexible placement in offices and network closets Plug‑and‑play setup with no configuration required Stable and efficient data transfer for connected devices Simplified network setup with power and data over a single cable
D-Link Layer 2 Gigabit DGS-F1210-26PS-E Power Over Ethernet The D-Link Layer 2 Gigabit supports both IEEE 802.3at and IEEE 802.3af PoE protocol. With a total PoE budget of 250 watts. allowing users to attach an IEEE 802.3af-compliant device to the DGS-F1210-26PS-E without requiring additional power. PoE is especially suitable for devices that are far from power outlets or when users want to minimize the clutter. of extra cables as power is supplied via the Ethernet cables themselves. Extensive Management and Layer 2 Features The DGS-1210 Series comes equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers. The Series also supports advanced features such as static routing, which allows for communication between different user groups . in different VLAN segments in a network. The switch can directly handle inter VLAN routing using multiple interfaces. making the network run faster and more efficiently. And, because the switches can manage internal routing. the network router can be assigned to handle external traffic routing only. Comprehensive Security Features to Protect Your Network D-Link’s innovative Safeguard Engine protects switches against traffic flooding and virus attacks. 802.11X port-based authentication allows the network to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and helps to protect the internal IT network. PoE Support Five of the nine models in the DGS-1210 series family support Power-over-Ethernet capabilities. simplifying deployments with IP cameras, VoIP phones, wireless access points, and other powered devices. These models include the DGS-1210-10P, DGS-1210-10MP, DGS-1210-28P, DGS-1210-28MP and DGS-1210-52MP. . Using the switch’s management interface, an can control various PoE functions, such as cameras or access points. from anywhere on the network, including over the Internet. They also support time-based PoE, which allows administrators to set a time window that determines. when each port’s PoE power is turned on and off. All PoE models support the IEEE 802.3af and 802.3at standards. and each PoE power budget varies per model. Specifications: Specifications 24x 10/100/1000BASE-T PoE Ports (802.3af/at compliant) • 2x Gigabit SFP Ports • 250W PoE Power Budget • Extend mode transmission distance up to 250m • Simplified Web UI and CLI management • 6kV Surge Protection 1 year warranty Manufacturer Link
Canon EOS R5 Re-think what you know about hybrid mirrorless cameras. Whether you shoot photos, video or a mixture of both, the EOS R5’s uncompromising performance will revolutionise your creativity. Professional mirrorless redefined Whatever you shoot, however you shoot it, the EOS R5 will let you be creative in ways you simply couldn’t before. Capture sensational 45 megapixel photos at up to 20 frames per second, or flick a switch for cinematic 12 bit 8K RAW video using the entire width of the camera’s sensor. Advanced AF is programmed using deep-learning artificial intelligence, while in-body image stabilisation works in concert with a lens’s own IS to provide up to 8 stops* of protection against camera shake. See detail like never before A next-generation 45 megapixel full-frame CMOS sensor captures incredible clarity, low noise and wide dynamic range: the perfect partner for our advanced RF lenses. Stay sharp, stay focused Canon EOS R5 has a Dual Pixel CMOS AF II lightning-fast to focus and boasts 5940 AF selectable positions, covering virtually 100% of the frame. Fast-moving subjects are kept sharp, even when moving quickly and unpredictably, while Face/Eye detection is superb for shallow-depth-of-field portraits. Canon EOS R5 Ground-breaking intelligent AF The camera’s autofocus is programmed using a deep-learning AI – first developed for our ground-breaking EOS-1D X Mark III. This enables the EOS R5 to recognise and track a subject’s face and eyes with new levels of accuracy and precision, even when viewed from the side. This tracking ability is also available when photographing dogs, cats and birds, as well as motor vehicles – a first for EOS cameras. Canon EOS R5 Other Specifications : Image Sensor Type 36 x 24 mm CMOS Effective Pixels Approx. 45 megapixels Total Pixels Approx. 47.1 megapixels Aspect Ratio 3:2 Low-Pass Filter Built-in/Fixed Sensor Cleaning EOS integrated cleaning system Colour Filter Type Primary Colour Sensor Shift-IS Yes, up to 8-Stops when used with compatible lenses 1 Specifications: Specifications : 45 megapixel resolution Full Frame 4K/120P video 20 frames per second Full Frame internal 8K RAW video CFexpress and SD card slots Built in Wi-Fi & Bluetooth 1 year warranty Manufacturer Link
The MSI MAG X670E TOMAHAWK WIFI Motherboard is designed for gamers and tech enthusiasts seeking high performance. With its advanced features, it delivers an exceptional computing experience. Firstly equipped with the latest technologies, the MSI MAG TOMAHAWK WIFI Motherboard supports the newest processors, ensuring you get the best performance possible. Whether you’re gaming or multitasking, this motherboard can handle it all. Furthermore setting up the MSI MAG TOMAHAWK WIFI Motherboard is straightforward, thanks to its user-friendly design. The intuitive BIOS interface allows for easy configuration and optimization. Moreover enjoy blazing-fast connectivity with built-in WiFi 6, which provides a stable and fast internet connection. Say goodbye to lag and enjoy uninterrupted online gaming and streaming. The MSI MAG X670E TOMAHAWK WIFI Motherboard offers extensive connectivity options, including multiple USB ports, PCIe slots, and M.2 slots. This ensures compatibility with a wide range of peripherals and components. Built with durability in mind, the MSI MAG TOMAHAWK WIFI Motherboard features high-quality components that provide excellent stability and longevity. It’s designed to withstand the demands of high-performance computing. Experience immersive audio with the motherboard’s superior sound technology. Whether you’re gaming, watching movies, or listening to music, you’ll enjoy crystal-clear sound quality. In summary, the MSI MAG X670E TOMAHAWK WIFI Motherboard combines cutting-edge technology, robust features, and excellent connectivity. Upgrade your system with the MAG X670E TOMAHAWK WIFI and unlock its full potential for gaming and computing. Specifications: CPU Support : AM5 Memory : 4x DDR5 Storage : 4x SATA 6G, 4x M.2 USB : 8x USB 5Gbps , 4x USB 2.0, 2x USB 10Gbps, 2x USB-C 10Gbps, 1x USB-C 20Gbps Wireless : Wi-Fi 6E, Bluetooth 5.3
Brand Lenovo Compatible Devices Laptops Input Voltage 240 Volts Mounting Type Wall Mount Wattage 90 watts Output Voltage 20 Volts Current Rating 4.5 Amps Lenovo 90W Slim Tip Ac Adapter (Original)
The Logitech Rally Bar Mini is an all-in-one video conferencing system designed for small to medium meeting rooms. Logitech builds this device to combine camera, microphones, and speakers into a single video bar for simpler deployment and cleaner room setups. Additionally, it supports both appliance mode and USB mode for flexible conferencing integration. Moreover, the Logitech Rally Bar Mini delivers up to 4K-class video with motorized pan and tilt for better room coverage. It includes AI-powered features that help automatically frame participants during meetings. In addition, a wide field of view ensures full visibility of meeting participants in the room. Furthermore, the device includes multiple beamforming microphones and integrated speakers designed for clear voice pickup and balanced audio output. It also supports expansion microphones for larger room setups when needed. Therefore, it fits hybrid meetings where in-room and remote participants communicate clearly. Additionally, the Logitech Rally Bar Mini supports major conferencing platforms such as Microsoft Teams, Zoom, and Google Meet. It also allows remote management through Logitech Sync for monitoring and updates. Moreover, it is designed for fast setup in professional meeting environments with minimal wiring. Finally, the Logitech Rally Bar Mini is a compact all-in-one conferencing system that simplifies video meetings with integrated audio, video, and smart automation. The Logitech Rally Bar Mini combines intelligent framing, clear sound, and easy deployment for modern meeting spaces. Specifications: 4K-class video with motorized pan and tilt AI-powered automatic participant framing Built-in beamforming microphones Integrated speakers for clear room audio Supports Teams, Zoom, and Google Meet
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
WiWU ZM‑901 – Sturdy foldable aluminum stand with adjustable angles and silicone pads, weighing just 900 g.Enhances posture, airflow, and workspace ergonomics while staying compact and travel-friendly. Model: WiWU ZM‑901 Material: Metal (aluminum/carbon steel) frame with silicone pads for grip Dimensions (Folded): 260 × 225.5 × 53 mm Package Size: 290 × 250 × 50 mm Net Weight: Approx. 900 g Compatibility: Fits laptops, tablets, and smartphones up to ~17 ” (some listings note 15.6″ limit, but device capacity varies) Features: Adjustable angle configuration, detachable foldable design for portability, silicone surface pads for anti-slip and vibration reduction Build & Design: Durable yet lightweight, crafted to enhance airflow and promote ergonomic posture
