The PROLINK PRO700 Line Interactive UPS is designed to provide reliable backup power and protection for computers, networking devices, and other electronic equipment. It helps maintain stable operation during power interruptions and voltage fluctuations. With a 650VA capacity and 360W output power, this UPS provides practical power support for home and office environments. Additionally, its line-interactive design with AVR technology helps regulate voltage and improve power stability. The PRO700 supports a wide input voltage range from 140V to 300V AC. Moreover, it automatically senses 50Hz or 60Hz input frequency, allowing compatibility with different power environments. The UPS provides simulated sine wave output during battery mode and sine wave output during AC mode. Furthermore, the fast transfer time helps reduce interruptions when switching to battery operation. The built-in 12V 8.2Ah battery provides backup power for connected devices during outages. Therefore, users can safely save work and shut down equipment during unexpected power failures. The PROLINK PRO700 includes protection features against short circuits, overloads, discharge, and overcharge conditions. In addition, its intelligent battery management helps improve battery protection and lifespan. The compact design makes the UPS suitable for desktops, network equipment, and small office setups. Also, its low noise operation allows comfortable use in different working environments. The PROLINK PRO700 Line Interactive UPS combines voltage regulation, backup power, and essential protection features in a compact solution. As a result, it provides dependable power support for everyday electronic devices. Specifications: Capacity: 650VA / 360W Input Voltage Range: 140V–300V AC ±5% Battery: 12V / 8.2Ah sealed lead-acid battery Output Waveform: Simulated sine wave (Battery Mode) Protection: Short circuit, overload, discharge, and overcharge protection
The Invo Line Interactive UPS INLI Series is a power protection solution designed to provide backup power and voltage regulation for computers, networking equipment, and other electronic devices. It helps protect connected equipment from power interruptions, voltage fluctuations, and electrical disturbances. Therefore, it is suitable for home, office, and professional environments. The line interactive technology provides automatic voltage regulation to maintain stable power output while reducing the impact of unstable electricity. In addition, the series includes multiple capacity options from 750VA to 3000VA, allowing users to select a suitable model for their power requirements. As a result, it supports different setups ranging from personal computers to larger equipment. The system includes models with LED or LCD displays, built-in batteries, and external battery support depending on the selected capacity. Moreover, higher-capacity models provide extended backup options with additional battery configurations. Therefore, the INLI Series offers flexible solutions for different power backup needs. The workflow compatibility makes this UPS series suitable for protecting PCs, workstations, networking devices, and other sensitive electronics. In addition, the compact tower design and protection features help provide reliable operation during power events. Specifications: Capacity options: 750VA to 3000VA Technology: Line Interactive UPS with AVR Display options: LED or LCD depending on model Battery options: Built-in or external batteries Models available: INLI85, INLI100, INLI150, INLI200, INLI300 and more
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
Specifications : Le grand ups keor spx 1500va fr _310303 UPS 1500va
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
Presentation High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. Lead time Usually in Stock General provided equipment Basic UPS signalling RS-232 cable CD with software Rack mounting brackets User manual USB cable Number of tare power 25 W Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size WS Physical number of rack unit 5U colour Black depth 61.5 cm height 21.95 cm net weight 78 kg USB compatible Yes width 43.8 cm Input network frequency 40…70 Hz number of input connectors 1 hard wire 3-wire (1P + N + E) input voltage limits 110…300 V adjustable (half load) 176…300 V inputvolt_other 220 V 240 V input voltage 230 V Output rated power in W 6000 W Maximum configurable power in W 6000 W output frequency 50/60 Hz +/- 3 Hz sync to mains outputvolt_other 220 V 240 V crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 bypass type Internal bypass (automatic and manual) curve equation Efficiency curve load maximum 100 % curve X-axis maximum 100 % curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage efficiency 94 % (full load) graph display 1 half load runtime 00:10:00 3000 W output voltage 230 V Maximum configurable power in VA 6000 VA rated power in VA 6000 VA Conformance product certifications CE standards IEC 62040-1-1 IEC 62040-1-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0…3000 m ambient air temperature for storage -15…60 °C Storage Relative Humidity Non-condensing 0…95 % storage altitude 0…15000 m acoustic level 55 dB show note OP temperature No IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery number of battery filled slots 0 number of battery free slots 0 Battery recharge time 3 h additional information Configurable for 220 : 230 or 240 nominal output voltage liquid value 0 battery curve D Battery power in VAH 1512 VAh runtime battery option SRV240RLBP-9A 1 3024 VAh SRV240RLBP-9A 2 4536 VAh SRV240RLBP-9A 3 6048 VAh SRV240RLBP-9A 4 7560 VAh SRV240RLBP-9A Communications & Management free slots 1 control panel Multifunction LCD status and control console alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency power off Yes manufacturer link 1 YEAR WARRANTY
PCE EX Online 3 KVA 2700W is a double-conversion online UPS designed for continuous and stable power protection. It is used for sensitive equipment such as servers, network systems, and critical office devices that require uninterrupted electricity. In addition, PCE EX Online 3 KVA 2700W uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers clean and stable pure sine wave output for safe operation of connected devices. Furthermore, PCE EX Online 3 KVA 2700W supports a 3000VA / 2700W capacity rating. As a result, it can handle high-load systems such as multiple PCs and networking equipment. It also maintains consistent voltage regulation for sensitive electronics during unstable power conditions. In addition, PCE EX Online 3 KVA 2700W includes advanced protection features. Therefore, it guards against overload, short circuits, voltage fluctuations, and power failures. Moreover, it is designed for long-duration reliability in professional environments. Overall, PCE EX Online 3 KVA 2700W delivers strong performance, zero-interruption switching, and high-level protection for critical power backup needs. Specifications: 3000VA / 2700W high-capacity output Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for sensitive devices Advanced protection against overload and faults
In the realm of uninterruptible power supplies (UPS), the Fanshine FSUPS 2000VA 900W stands out as a dependable solution, offering a robust and efficient power backup for your electronic devices. Transitioning to its key features, the UPS Fanshine FSUPS 2000VA 900W excels in providing a substantial power capacity, ensuring that your critical electronics remain powered during unexpected outages. This UPS is designed to safeguard your equipment and data. Moreover, this power supply solution impresses with its compact design, making it suitable for various settings, from home offices to small businesses. The Fanshine FSUPS seamlessly integrates into your space without compromising on performance. In addition to its functionality, the FSUPS 2000VA 900W offers versatile connectivity options, including multiple outlets for various devices. This ensures a flexible and efficient setup, protecting a range of electronics from power fluctuations. Furthermore, Fanshine’s commitment to user-friendly design is evident in the FSUPS 2000VA 900W’s easy setup and clear indicators. This ensures that users can monitor the status of their power supply effortlessly. In conclusion, the Fanshine FSUPS 2000VA 900W redefines reliability in power backup solutions, combining substantial capacity, compact design, and user-friendly features. Elevate your protection against power interruptions effortlessly with the FSUPS 2000VA 900W – your trusted solution for uninterrupted power! Specifications Model : FSUPS2000VA Input Voltage : 145VAC~290VAC Output Voltage : 195VAC~255VAC Output Wave Form : PWM/DC Output Frequency : 50Hz Backup Time : 10 to 15 minutes Noise Level : <45dB Operating Temperature : 0-45 Celsius
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
Description : The Professional Series (1P/1P) – Tower is an advanced, affordable on-line double-conversion technology single-phase UPS system. Tower versions are available with 1000VA to 10000VA models and these offer high reliability for workstations, server and network equipment. The Professional Series is designed with automatic voltage regulation (AVR) to protect against power outages, disturbances and spikes. High voltage battery chargers and battery extension assembly is available for the long run time application. Key Features and Benefits True Double-Conversion Online UPS Mircoprocessor control optimizes reliability Input power factor correction Output Power Factor 0.80. Wide input voltage (110V – 300V) Converter mode available ECO mode for enegry saving (Only available for 1 – 3 KVA) Generator compatible Adjustable battery number only available for 6K and up models Smart SNMP works well with either USB or RS-232 together Emergency power off function (EPO) only available for 6K / 10K models Optional isolation transformer available. 02 Years Warranty manufacturer link
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
UPS PCE VX / MXOnline 2KVA 1600W is a double-conversion online UPS designed for continuous protection of servers, PCs, and network systems. It delivers stable power during outages and voltage fluctuations. In addition, it uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers pure sine wave output for safe operation of sensitive equipment. Furthermore, it supports a 2KVA / 1600W load capacity. As a result, it can power multiple devices such as computers, routers, and small server setups. It also maintains stable voltage regulation under unstable input conditions. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and power instability. Moreover, it is designed for environments that require continuous uptime and reliability. Overall, UPS PCE VX / MXOnline 2KVA 1600W delivers stable backup performance, zero-interruption switching, and strong protection for critical systems. Specifications: 2KVA / 1600W capacity for professional equipment Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for stable devices Advanced protection against overload and faults
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR is designed to provide reliable backup power and voltage protection for computers, networking equipment, and home electronics. It helps keep connected devices running during short power interruptions. The UPS provides a 1200VA capacity and uses Automatic Voltage Regulation (AVR) technology. Additionally, it helps stabilize unstable voltage levels to protect connected equipment from power fluctuations. The PROLINK PRO1201 features super-fast charging technology that helps reduce battery recharge time. Moreover, it allows the UPS to recover power faster after an outage and prepares it for future use. The UPS includes multiple protection features to help protect connected devices. Furthermore, it provides protection against overload, short circuit, surge, and low battery conditions during operation. The PROLINK PRO1201 features LED indicators that display important operating status information. Therefore, users can easily check the UPS condition and power status. The compact design makes the UPS suitable for homes, offices, and small workspaces. In addition, it provides a practical backup solution for computers, routers, and other essential devices. The PROLINK PRO1201 1200VA Super-Fast Charging UPS AVR combines backup power, voltage regulation, fast charging, and safety features. As a result, it provides reliable power support for everyday electronic equipment. Specifications: Capacity: 1200VA / 720W Technology: Automatic Voltage Regulation (AVR) Charging: Super-Fast Charging Technology Protection: Overload, Short Circuit, Surge, Low Battery Protection Display: LED Status Indicators
The Prosonic 2000mAh MINI DC UPS | GS-1018 provides stable backup power for routers, modems, CCTV cameras, ONU devices, and other low-power networking equipment during electricity outages. Its compact design fits easily beside networking devices while maintaining reliable operation for home and office setups. This mini UPS supports multiple DC output options, making it suitable for different electronic devices that require continuous power. The built-in safety protections help prevent overheating, overload, overcharging, and short circuits, which improves long-term reliability and device safety. In addition, the lightweight body allows easy placement in small spaces without adding clutter to your setup. The unit delivers dependable backup support for internet connectivity during load shedding or sudden power interruptions. Users can connect routers and communication equipment directly to maintain stable online access for work, streaming, online classes, or security monitoring systems. Key operating features include efficient power conversion, portable dimensions, and compatibility with common DC-powered devices. The Prosonic GS-1018 also offers a practical solution for users who need uninterrupted networking performance without using a large traditional UPS system. Moreover, the compact battery backup system helps reduce downtime while protecting connected devices from sudden shutdowns. Its easy plug-and-play setup makes installation simple for both home and small business users. Specifications: 2000mAh backup battery capacity for networking devices Supports routers, CCTV cameras, modems, and ONU devices Multiple DC output options for wider compatibility Built-in overload, short circuit, and overcharge protection INPUT : 100-240Vac 50/60Hz OUTPUT : 5V/9V/12V/USB port/POE port
APC UPS Accessories VGL9901I Easy UPS Dry Contact Card/Relay I/O card, 1 – 10KVA (SRV models)
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
