UPS ONLINE 3KVA 2400W 1 YEAR WARRANTY ABSOLUTELY PURE SINUSWELLE – With this inverter / inverter you operate your 220V devices via a 24V battery and a continuous power of 2400W 3KVA. Inverter is a device that allows you to use electrical devices everywhere, even when you are not at the power source MULTIFUNCTION HYBRID UNIT – Thanks to the small LCD display, it is also possible to charge the batteries with AC / solar charge controllers, setting the input voltage range and charging current. MODERN PROTECTION FEATURES – The device has many modern safety features such as: overload protection, overheating protection, short-circuit protection, so it is also suitable for home appliances, as well as microwaves, air conditioners, refrigerator, fan and daylight lamp. HIGH QUALITY MATERIALS – Equipped with PWM control, the inverter generates a pleasing amount of waste heat.
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 10000 Nominal Power (W) 8000 Standard ModelDimension (mm) 442 x 190 x 688 (D x W x H) Weight (kg) 66 Long-run ModelDimestions (mm) 442 x 190 x 318 (D x W x H) Weight (kg) 16 INPUT Connection Type Terminal Nominal Voltage 208/220/230/240VAC Voltage Range 110-300 VAC (Load at 50%)176-300 VAC (Load at 100%) Frequency Range 46~54 Hz or 56~64 Hz Power Factor >= 0.99 OUTPUT Connection Type Terminal Output Voltage 208/220/230/240VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 46~54 Hz or 56~64 Hz Frequency Range (Batt. Mode) 50Hz or 60Hz +/-0.1Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load)≤5% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232*USB Port Emergency Power Off (EPO) BATTERY Standard ModelType 12V / 9Ah Numbers 16 Typical Recharge Time 9 hours recover to 90% capacity Long-run ModelType Depending on the capacity of external batteries Number 16 ~ 20 (Adjustable) Charging Current (max) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries) manufacturer link
The APC UPS Online Easy SRV 800W / 1 KVA SRV1KI delivers continuous, reliable power for critical equipment. First, it provides pure sine wave output suitable for sensitive electronics. In addition, it protects devices from phttps://mojitech.net/shop/peripherals/ups-battery-backup/apc-smart-ups-rc-800w-1kva-sine-wave-lebanon/ower surges, spikes, and outages. Moreover, the UPS features a compact design for easy installation in offices or server rooms. Finally, the intuitive LCD interface allows real-time monitoring of battery status and load. The SRV1KI ensures uninterrupted operation and safeguards essential systems during power disruptions. Specifications: 800W / 1 KVA pure sine wave output for sensitive devices Protects against power surges, spikes, and outages Compact design suitable for offices and server rooms LCD interface for monitoring battery and load status Ensures uninterrupted operation during power disruptions
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
The Beco Mini DC UPS 8800mAh delivers compact and reliable power backup for small DC devices. It offers emergency power without bulky hardware. This helps protect devices during brief outages or unstable power. Users enjoy continuous operation with confidence. Moreover, the Beco Mini DC UPS features an 8800mAh battery for extended backup time. It supports devices like routers, cameras, and small electronics. This ensures continuous functionality when mains power fails. Backup power stays dependable. In addition, the DC UPS supports automatic switching when power cuts occur. It detects outages instantly and activates backup power without delay. This keeps your devices running smoothly. Protection remains seamless and reliable. Furthermore, the Beco Mini DC UPS includes stable DC output for sensitive electronics. Power delivery stays steady even under load. This helps reduce risk of damage. Devices operate without sudden stops. Also, the UPS delivers a compact and portable design for easy placement anywhere. You can install it near devices without taking much space. This adds convenience for small homes and offices. In addition, the Beco Mini DC UPS 8800mAh supports multiple connection options for flexible use. It works with DC devices requiring uninterrupted power. Also, the compact and sturdy casing improves durability for daily use. The build feels reliable and long‑lasting. Users can trust the UPS for regular backup needs. Overall, the Beco Mini DC UPS 8800mAh delivers dependable backup power, seamless switching, and flexible use in a compact form. It is ideal for small DC devices needing continuous power and stable operation. Specifications: MINI DC UPS POE 8800mah, 17W Built-in Lithium Battery 2200mAh*4 5VDC USB output, 3*Sockets DC output Interface 5V/9V/12V Over charge, Over discharge, Overload, & Short circuit protection Microprocessor controller guaranties high reliability Multi-LED Status Indicator For: Routers, CCTVs, Modem, Wireless Phones, Monitors, PSP, and others
UPS PCE VX / MXOnline 2KVA 1600W is a double-conversion online UPS designed for continuous protection of servers, PCs, and network systems. It delivers stable power during outages and voltage fluctuations. In addition, it uses online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers pure sine wave output for safe operation of sensitive equipment. Furthermore, it supports a 2KVA / 1600W load capacity. As a result, it can power multiple devices such as computers, routers, and small server setups. It also maintains stable voltage regulation under unstable input conditions. In addition, it includes built-in protection features. Therefore, it helps protect against overload, short circuit, and power instability. Moreover, it is designed for environments that require continuous uptime and reliability. Overall, UPS PCE VX / MXOnline 2KVA 1600W delivers stable backup performance, zero-interruption switching, and strong protection for critical systems. Specifications: 2KVA / 1600W capacity for professional equipment Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for stable devices Advanced protection against overload and faults
PROLINK 2KVA AUTO VOLTAGE REGULATOR W/LCD PVR2000D PROLiNK PVR Series is designed to automatically maintain a constant voltage level to protect sensitive electronics from brownouts, under voltages and over voltages. The PROLiNK PVR takes efficiency to a new level with its microprocessor controller tailored to allow extremely fast response for detecting and regulating voltage. Equipped with a time-delay function, the PVR is able to protect connected devices from power-back surges.
The PCE PCD 12V 65Ah Deep Cycle Battery delivers dependable power for a wide range of applications. It provides stable energy over long discharge cycles. This battery supports regular use in marine, RV, solar, and backup power systems. It fits well where lasting performance matters. Moreover, the PCE PCD Deep Cycle Battery features a deep cycle design for long life and strong reliability. It tolerates repeated charging and discharging without damage. This increases uptime and reduces maintenance needs. Users enjoy continuous power without frequent replacements. In addition, the battery delivers 12 V and 65 Ah capacity for steady power delivery. This suits medium and high demand systems. Appliances, lights, and electronics receive reliable current. It helps systems stay stable in everyday use. Furthermore, the PCE PCD 12V 65Ah Deep Cycle Battery includes sturdy construction for long-lasting durability. The strong casing protects internal cells against wear and tear. This adds confidence in heavy use environments. Performance remains consistent over time. Also, the battery supports deep discharge recovery for extended service life. It recovers well even after heavy drain cycles. In addition, the PCE PCD Deep Cycle Battery is easy to install in many setups. It fits most battery holders and racks without fuss. Connections remain secure and simple. Furthermore, the PCE PCD Deep Cycle Battery supports stable performance in varying temperatures. It remains reliable in moderate heat and cold. This helps outdoor and mobile applications. Overall, the PCE PCD 12V 65Ah Deep Cycle Battery delivers strong power, lasting durability, and smooth performance. It fits home, marine, solar, and backup use. This battery is ideal for users who want dependable deep cycle energy every day. Specifications: Voltage : 12V Capacity : 65Ah
APC UPS Accessories SMX48RMBP2U APC Smart-UPS X-Series 48V External Battery Pack Rack/Tower for SMX1000, SMX1500, SMX750
The Yuasa SWL2500T Industrial VRLA Battery delivers reliable power for industrial and backup applications. First, it provides consistent energy output for critical equipment and systems. In addition, the valve-regulated lead-acid (VRLA) technology ensures maintenance-free operation and extended service life. Moreover, the battery features durable construction, vibration resistance, and high discharge efficiency for demanding environments. The compact design allows easy installation in various setups. Finally, its dependable performance, safety features, and long-term reliability make it ideal for industrial, UPS, and emergency power systems. Specifications: VRLA Technology: Maintenance-free operation with long service life High Discharge Efficiency: Reliable power for critical equipment Durable Construction: Resistant to vibration and harsh environments Compact Design: Easy installation in various industrial setups Industrial Reliability: Ideal for UPS, backup, and emergency power
Specifications : UPS Type Tower Phase Single phase with ground Rating (VA) 1000 Nominal Power (W) 800 Standard Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 9.8 Long-run Model Dimension (mm) 282 x 145 x 220 (D x W x H) Weight (kg) 4.1 INPUT Connection Type IEC 320-C14 Nominal Voltage 200/208/220/230/240 VAC Voltage Range 110-300 VAC (Load at 50%) 160-280 VAC (Load at 100%) Frequency Range 45 ~ 70 Hz Power Factor >= 0.99 OUTPUT Connection Type 3 x Universal socket (PRO901WS) 2 x Universal socket (PRO901WL) Nominal Voltage 200/208/220/230/240 VAC Voltage Regulation ±1% Frequency Range (Synchronized Range) 47 ~ 53 Hz or 57 ~ 63 Hz Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz Current Crest Ratio 3:1 Harmonic Distortion ≤3% THD (Linear load) ≤6% THD (Non-linear load) ALARM & INDICATORS Battery Mode Sounding every 4 seconds Low Battery Sounding every second Overload Sounding twice every second Fault Continuously sounding LCD Load level, Battery Level, AC mode, Battery mode, Bypass mode and Fault CONNECTIVITY, CONTROL & MONITORING Front panel Status LED, Function keys, LCD display Communication Smart RS232* USB Port BATTERY Standard Model Type 12V / 9Ah Numbers 2 Typical Recharge Time 4 hours recover to 90% capacity Long-run Model Type Depending on the capacity of external batteries Number 2 or 3 Charging Current (max) 1A / 2A / 4A / 6A Adjustable manufacturer link
The APC Easy UPS 1200W / 2200VA BX2200MI-MS provides reliable backup power for critical devices. First, it delivers line-interactive output to protect equipment from voltage fluctuations. In addition, it safeguards connected electronics against surges, spikes, and short outages. Moreover, the UPS features a compact design for easy installation in offices or home setups. Finally, the LCD panel allows real-time monitoring of battery and load status. The BX2200MI-MS ensures uninterrupted operation and protects essential systems during power interruptions. manufacturer link Specifications: 1200W / 2200VA line-interactive output for reliable device protection Protects electronics from surges, spikes, and outages Compact design suitable for office or home setups LCD panel for monitoring battery and load status Ensures uninterrupted operation during power interruptions
Original product name: UPS 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection | 2 Years Warranty 5E1100iUSB Eaton Line Interactive UPS 1100VA / 660W, AVR, 6 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery)
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
Presentation High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. Lead time Usually in Stock General provided equipment Basic UPS signalling RS-232 cable CD with software Rack mounting brackets User manual USB cable Number of tare power 25 W Number of power module free slots 0 Number of power module filled slots 0 redundant No UPS size WS Physical number of rack unit 5U colour Black depth 61.5 cm height 21.95 cm net weight 78 kg USB compatible Yes width 43.8 cm Input network frequency 40…70 Hz number of input connectors 1 hard wire 3-wire (1P + N + E) input voltage limits 110…300 V adjustable (half load) 176…300 V inputvolt_other 220 V 240 V input voltage 230 V Output rated power in W 6000 W Maximum configurable power in W 6000 W output frequency 50/60 Hz +/- 3 Hz sync to mains outputvolt_other 220 V 240 V crest factor 3 : 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 bypass type Internal bypass (automatic and manual) curve equation Efficiency curve load maximum 100 % curve X-axis maximum 100 % curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage efficiency 94 % (full load) graph display 1 half load runtime 00:10:00 3000 W output voltage 230 V Maximum configurable power in VA 6000 VA rated power in VA 6000 VA Conformance product certifications CE standards IEC 62040-1-1 IEC 62040-1-2 Environmental ambient air temperature for operation 0…40 °C relative humidity 0…95 % non-condensing operating altitude 0…3000 m ambient air temperature for storage -15…60 °C Storage Relative Humidity Non-condensing 0…95 % storage altitude 0…15000 m acoustic level 55 dB show note OP temperature No IP degree of protection IP20 Batteries & Runtime battery type Lead-acid battery number of battery filled slots 0 number of battery free slots 0 Battery recharge time 3 h additional information Configurable for 220 : 230 or 240 nominal output voltage liquid value 0 battery curve D Battery power in VAH 1512 VAh runtime battery option SRV240RLBP-9A 1 3024 VAh SRV240RLBP-9A 2 4536 VAh SRV240RLBP-9A 3 6048 VAh SRV240RLBP-9A 4 7560 VAh SRV240RLBP-9A Communications & Management free slots 1 control panel Multifunction LCD status and control console alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm Emergency power off Yes manufacturer link 1 YEAR WARRANTY
Legrand Ups Keor SPX Line Interactive 1KVA/600W- 310302 Specifications : Le grand ups keor spx 1kva 310302 UPS 1KVA 1000VA
Specifications : Le grand ups keor spx 1500va fr _310303 UPS 1500va
FANTECH NS11 Portable Aluminum Laptop Stand is designed to improve comfort, posture, and airflow while using a laptop. It is suitable for office work, study, and remote setups. It features an adjustable height and angle design that allows users to position their laptop at a more ergonomic viewing level. Therefore, it helps reduce neck and back strain during long working sessions. The stand is made from durable aluminum alloy for strong support and long-lasting use. In addition, it provides stable holding for laptops up to 15.6 inches. Its foldable and lightweight design makes it easy to carry and store. Moreover, the included free pouch adds convenience for travel and portability. The open structure improves ventilation and helps prevent laptop overheating. As a result, it offers a practical solution for comfortable and efficient laptop use. Specifications: Adjustable height and viewing angle Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Includes free carrying pouch
FANTECH NC30 Laptop Cooling Stand is designed to improve laptop cooling, comfort, and usability during long gaming or working sessions. It supports laptops up to 17.3 inches, making it suitable for both gaming laptops and professional setups. It features a detachable RGB fan that provides active cooling to reduce heat buildup. Therefore, it helps maintain stable performance during heavy workloads and extended use. The stand offers adjustable height and a 360° swivel design for flexible positioning. In addition, it improves ergonomic comfort by allowing users to find the best viewing angle. Its strong structure ensures stable support for large laptops. Moreover, the open design enhances airflow for better passive cooling efficiency. The RGB lighting adds a stylish gaming aesthetic to any setup. As a result, it combines performance, comfort, and visual appeal in one cooling solution. Specifications: Detachable RGB cooling fan Adjustable height ergonomic design 360° swivel rotation base Supports laptops up to 17.3 inches Enhanced airflow cooling structure
FANTECH NS10 Lifting Laptop Stand is a compact and adjustable stand designed to improve comfort and ergonomics during laptop use. It is suitable for office work, study, and home setups. It features height and angle adjustment to help users find a comfortable viewing position. Therefore, it reduces neck and shoulder strain during long working hours. The sturdy frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves airflow around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The stand is lightweight and easy to adjust, making it practical for everyday use. As a result, it offers a simple and effective ergonomic solution for any workspace. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NS12 Laptop Stand is a portable and adjustable stand designed to improve comfort, posture, and laptop cooling. It is suitable for office work, study, and remote setups where ergonomic positioning is important. It offers 16 levels of height adjustment, allowing users to find the most comfortable viewing angle. Therefore, it helps reduce neck and shoulder strain during long hours of use. The stand is built with durable aluminum alloy for strong stability and long-term use. In addition, it supports laptops up to 15.6 inches securely. Its foldable design makes it easy to carry and store in a bag. Moreover, the included free pouch improves portability for travel and daily commuting. The open-frame structure enhances airflow around the laptop. As a result, it helps improve cooling performance during heavy use. Specifications: 16-level height adjustment system Durable aluminum alloy construction Supports laptops up to 15.6 inches Foldable portable lightweight design Free carrying pouch included
FANTECH NS10 Lifting Laptop Stand Silver is a height and angle adjustable stand designed to improve comfort, posture, and airflow during laptop use. It is suitable for office work, study, and home setups. It allows flexible adjustment of height and viewing angle to match user preference. Therefore, it helps reduce neck and shoulder strain during long working hours. The sturdy aluminum-style frame provides stable support for laptops of different sizes. In addition, it keeps the device secure during typing and daily use. Its open design improves ventilation around the laptop. Moreover, this helps reduce heat buildup and supports better cooling performance. The lightweight and foldable structure makes it easy to carry and store. As a result, it offers a practical ergonomic solution for everyday use. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
FANTECH NC21 Cooling Pad is designed to improve laptop cooling performance, comfort, and usability during long gaming or working sessions. It supports efficient airflow with a powerful dual-fan system for stable temperature control. It features large dual fans that deliver strong cooling performance across the laptop base. Therefore, it helps reduce overheating and maintain smoother system performance during heavy use. The stand includes 8 levels of height adjustment for better ergonomic positioning. In addition, it helps reduce neck and back strain by improving viewing angles. A built-in phone holder adds extra convenience for multitasking. Moreover, RGB lighting enhances the gaming setup with a stylish visual effect. Its sturdy design supports stable laptop placement while maintaining effective airflow. As a result, it combines cooling, comfort, and functionality in one setup solution. Specifications: Max Weight Load : 10 KG Material : Steel Size : 259 x 225 x 43mm Weight : 1440 Compatibility : Laptops or Tablets up to 17 inches
