Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
9E20Ki Eaton Online Double Conversion 9E 20KVA / 16000W Combo: 1:1 and 3:1, In-Built Automatic Relay Bypass, Intelligent Power Software, 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 1 slot for Network-MS, ModBus-MS or Relay-MS cards, 1 Year Warranty
APC Easy UPS 800VA 230V Line Interactive UPS is a reliable power backup solution designed to protect home and office electronics from power outages, voltage fluctuations, and surges. It ensures stable and continuous operation for essential devices during unstable electricity conditions. It provides 800VA / 450W power capacity with line-interactive technology. Therefore, it automatically regulates voltage through AVR (Automatic Voltage Regulation) without switching to battery mode frequently. In addition, it helps extend battery life and maintain stable power output. The UPS includes an LED status display for clear monitoring of system and power conditions. As a result, users can easily check operational status, battery level, and load conditions at a glance. It features universal receptacles for flexible device compatibility. Meanwhile, its compact design and 5.3 kg weight make it easy to install in home or office environments. APC designs the Easy UPS series for dependable and efficient power protection. Therefore, this model is ideal for PCs, networking equipment, routers, and other essential electronics. Specifications: 800VA / 450W power capacity Line-interactive AVR technology LED status monitoring display Universal output receptacles Reliable backup for PCs and electronics
The ProLink PRO910WL Professional II Series Online UPS is designed to provide stable and reliable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power interruptions and protects connected devices from unstable electricity. The UPS provides a 10000VA capacity with an 8000W power rating. Additionally, it uses online double conversion technology to deliver clean and consistent power output for sensitive equipment that requires reliable energy support. The ProLink PRO910WL supports pure sine wave output for improved compatibility with different electronic devices. Moreover, its advanced power management system helps maintain stable voltage and frequency during changing power conditions. The UPS includes an LCD display that allows users to monitor important system information. Furthermore, the display provides details about input voltage, output voltage, battery status, load level, and operating conditions. The PRO910WL supports external battery configurations for extended backup time. In addition, it includes protection features against overload, short circuit, over-temperature, and battery-related issues to help protect connected equipment. The UPS is suitable for data centers, offices, industrial environments, and other locations that require dependable power backup. Therefore, it provides a practical solution for users who need continuous power protection for important systems. The ProLink PRO910WL Professional II Series Online UPS combines high power capacity, online protection technology, monitoring features, and safety functions. As a result, it delivers reliable backup power for critical applications. Specifications: Capacity: 10000VA / 8000W UPS Type: Online Double Conversion Output Waveform: Pure Sine Wave Display: LCD Display Protection: Overload, Short Circuit, Over Temperature, Battery Protection
INVO Online INH100 INVO Online INH100 Centralized server center, mainframe, network control center, computing center max efficiency UPS System . AC Input Bypass AC Output . Battery Fault Screen OFF ON LCD AC Input Bypass AC Output Battery Fault Screen OFF ON LCD INVO Online INH100 Full Specifications : INVO Online INH100 Centralized server center, mainframe, network control center, computing center INVO Online INH100 UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH Specifications: Specifications : Centralized server center, mainframe, network control center, computing center INVO Online UPS High Frequency 1000 VA, LCD Display Inbuilt Battery 2 x 12V/9AH 1 year warranty Manufacturer Link
Hawk Ups 1500VA Input: Phase: Single + GND. Voltage Range: 165-275V/ 82V-138V. Frequency: 50/60Hz +- 10%. Output: Voltage Range: 220/230/240/110/120V +- 10%. Wave Form: Sine wave ( Mains), Square Waves (inverter). Frequency: 50/60Hz +- 1% (Batter Mode). Crest Factor: 3:1. Transfer time: <10ms. Protection: Energy rating: 320 Joules Instantaneous response. Test Standard: IEEE 587 Cat. A&B. Noise Filtering: EMI/RFI: Full Time Suppression. Communication: RS232 or USB with PC monitoring software and cable (optional). Battery: Type: Sealed Lead-acid. Quantity: (x2) 12V8A. Backup Time: 15-20min depends on the load.
Original product name: UPS 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection, 2 Years Warranty (Including Battery) 5E650IUSBDIN Eaton Line Interactive UPS 650VA / 360W, AVR, 1 Schuko (DIN) + 2 IEC, USB port, software, Input / Output jacks included for Telephone / Modem / Internet Line surge protection 2 Years Warranty (Including Battery)
APC UPS Accessories SURT192RMXLBP2 APC Smart-UPS RT192V RM 15/20KVA SURT models Battery Pack 2 Rows
Specifications : Professional II Series (1P/1P) Tower is specifically designed for operation in poor power areas. They provides high power density with long backup time in compact size. It’s ideal for ATMs, banking and other business critical applications. – True double-conversion – Microprocessor control optimizes reliability – Output power factor 0.8 – Wide input voltage (110 V – 300 V) – Converter mode available – ECO mode for energy saving – Generator compatible – Smart SNMP works well with either USB or RS-232 together – Comprehensive display allows easy monitoring and access of UPS status – Input power factor correction manufacturer link
General Topology Online double conversion Configuration Tower Part Number 9E3000I Rating (VA/Watts) 3000/2400 Dimensions (H x W x D, mm) 399 x 330 x 190 Weight (kg) 24.2 Warranty 2 years Electrical Input Connection (1) IEC-320-C20 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (6) IEC-320-C13 (1) IEC-320-C19 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV)
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50% • Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Specifications Voltage range OUTPUT Output wiring Rated voltage Voltage regulation Frequency Waveform Power factor Total harmonic distortion (THDv) Crest factor Overload BATTERIES DC voltage Number of battery lnbuilt battery (standard model) Charging current Recharge time EM Efficiency Transfer time Protections Max. number of parallel connections Communications Display OTHERS Operating temperature Storage temperature Relative humidity Altitude !Prating Noise level at 1 m Dimensions (W x D x H) (mm) Packaged dimensions (W x D x H) (mm) Net weight (kg) Gross weight (kg) 110- 176 Vac (linear derating between 50% and 100% load); 176- 288 Vac (no derating) Single-phase three-wire (1 Cll + N + PE) 208 (PF=0.9) 1220 1230 1240 Vac ± 1% Synchronized to bypass in mains mode; 50 160 Hz±0.1% Hz in battery mode Sinusoidal 1 s 1% (linear load); s 4% (non-linear load) 3:1 105%- 110% for 10 min, 110%- 125% for 1 min, 126%- 150% for 30 s 192 Vdc (192- 240 Vdc settable) 16 pes (16- 20 settable) 12VI7Ahx16 I 12VI9Ahx16 Standard model: 1 A; Long time model: 5A(default), 1 – 5Asettable, 12A (optional) Standard model: 90% capacity restored in 8 hours; Long time model: depend on the capacity of battery ~ 94% at 100% load, max. 95% at 60% load,~ 98% in ECO mode Oms Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure 4 RS232 (standard), USB I RS4851 dry contacts I SNMP I baltery temperature compensation (optional) LCD+ LED O”C – 40″C -25″C – 55″C (without battery) 0 – 95% (non-condensing) s 1 000 m, derating 1% for each additional 1 00 m IP20 S55dB S58dB 191 X 465 X 711 (S), 191 X 465 X 350 (H) 191 X 495 X 711 (S), 191 X 495 X 350 (H) 310 X 654 X 941 (S), 318 X 595 X 475 (H) 310 X 685 X 941 (S), 318 X 617 X 475 (H) 53 (S), 14.5 (H) 62 (S), 16.5 (H) 61 (S), 16 (H) 70 (S), 18 (H)
The Prolink Online UPS 10KVA with LCD and Internal Battery is designed to provide stable power protection for servers, networking equipment, and critical electronic systems. It helps maintain continuous operation during power failures and protects devices from unstable power conditions. The UPS provides a 10KVA capacity and uses online double conversion technology. Additionally, it delivers clean and stable power output to support sensitive equipment that requires reliable energy performance. The Prolink Online UPS features an LCD display that allows users to monitor important system information. Moreover, the screen shows details such as input voltage, output voltage, battery status, load level, and operating conditions for easier management. The UPS includes an internal battery system that provides backup power during outages. Furthermore, it supports protection features against overload, short circuit, over-temperature, and battery problems to help protect connected devices. The Prolink Online UPS is suitable for offices, data centers, and professional environments that need continuous power support. Therefore, it provides a practical backup solution for important equipment that requires stable electricity. The UPS combines high capacity, online power protection, battery backup, and monitoring features in one system. As a result, it helps users maintain reliable power performance during unexpected interruptions. Specifications: Capacity: 10KVA UPS Type: Online Double Conversion Display: LCD Display Battery: Internal Battery System Protection: Overload, Short Circuit, Over Temperature Protection
LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 48V 250ah Solar Panel Rechargeable Lithium Battery For Energy Storage System model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V MAX.Charge&Discharge Current 120A DOD 95% Modeles Connection 1-6 in parallel Ingress protection IP21 Cycle Life >6000, @25°C Working Temperature Range -10-50°C Net Weight(kg) 159KG Gross Weight(kg) 183KG Dimension(MM) 615*350*955MM 5 Years Warranty Specifications: LiFePO4 BATTERY SYSTEM LPBF Series 48250-48300 model LPBF48250 capacity 48V 12.5KWH Voltage 48V Rated Voltage 51.2V Charge Voltage 57.6V Discharge Voltage Range 48-57.6V 5 Years Warranty
Specifications : GENERAL Rated Power 5000VA / 5000W Communication Interface Removable USB / RS232 / RS485 / Bluetooth / Dry-contact Dimension D x W x H (mm) 115 x 300 x 400 Net Weight (kgs) 13 INPUT Voltage 230VAC Selectable Voltage Range 170 ~ 280 VAC (For Personal Computers)90 ~ 280 VAC (For Home Appliances) Frequency Range 50Hz / 60Hz (Auto sensing) OUTPUT AC Voltage Regulation (Batt. Mode) 230VAC ± 5% Surge Power 10000VA Efficiency (Peak) 90% ~ 93% Transfer Time 15 ms (For Personal Computers)20 ms (For Home Appliances) Waveform Pure sine wave BATTERY Battery Voltage 48VDC Floating Charge Voltage 54VDC Overcharge Protection 63VDC SOLAR & AC CHARGER Solar Charger Type MPPT Maximum PV Array Open Circuit Voltage 500VDC Maximum PV Array Power 5000W MPP Range @ Operating Voltage 120VDC~450VDC Maxmum Solar Charge Current 100A Maximum AC Charge Current 100A manufacturer link
Features • Advanced DSP and 3-level technology • Output power factor 1.0 • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (11 0 – 288 Vac) and frequency range (40 -70Hz) • 50 I 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input I 60 Hz output or 60 Hz input I 50 Hz output • Dual-input design, supporting independent bypass • Flexible battery configuration (settable 16-20 pes batteries) • Digitally controlled charger • High charging current available (Max. 12 A) • Charging voltage and current configured by demands • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Intelligent battery management, automatic floating I equalizing charge control, charger dormancy control, increasing battery life by 50%• Ability to switch on the UPS with batteries • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Compact internal layout, miniaturized the complete unit for small footprint • LCD+LED display, multi-functional keys operation, friendly human-machine interface • Powerful background software for parameters configuration • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Available Options • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contacts, EMD, and SMS alarms Rear Panel 1. RS232 2. EPO 3. Parallel Port (optional) 4. USB (optional) 5. Temperature Detection (optional) 6. Intelligent Slot 7. Reserved: for manual bypass or battery breaker or outlets ect. 8.Fans 9. Bypass Breaker 10. Input Breaker 11.GND 12.Terminals and Cover http://en.eastups.com/EA900G4610kVA/6754.jhtml
Specifications : Brand HAWK Package Dimensions 59.2 x 54.5 x 19.8 cm; 9 Kilograms Item model number HAWK202011 Manufacturer HAWK Wattage 720 watts Are Batteries Included Yes Item Weight 9 kg
The Beco GP1500 1500VA 900W UPS delivers strong and reliable power protection for home and office electronics. It keeps computers, routers, and monitors running during outages. This helps prevent data loss and sudden shutdowns. Peace of mind increases with reliable backup power. Moreover, the Beco GP1500 1500VA 900W UPS offers 1500 VA capacity and 900 W output for high-demand systems. It supports larger desktops and entertainment setups easily. Backup power stays strong during interruptions. This improves system stability every day. In addition, the UPS features built-in surge protection to guard appliances from spikes and unstable power. This adds important defense against electrical damage. Devices remain safe during storms and fluctuations. Safety stays consistent. Furthermore, the Beco GP1500 1500VA 900W UPS includes automatic voltage regulation to smooth dips and spikes. It balances voltage without manual adjustment. This helps extend device lifespan. Consistent power improves performance. Also, the UPS delivers dependable battery backup when electricity fails. You can save files and shut down properly before power runs out. This reduces the risk of data loss. Backup support feels reassuring. In addition, the Beco GP1500 1500VA 900W UPS has clear LED indicators for power and battery status. You can check conditions easily at a glance. This makes monitoring simple and fast. Moreover, the UPS includes multiple output sockets for connecting several devices at once. This increases flexibility for busy workstations and entertainment centers. You can protect all critical electronics with one unit. Furthermore, the Beco GP1500 1500VA 900W UPS supports quick plug-and-play setup with no complex steps. Installation feels easy for any user. Setup remains fast and hassle-free. Also, the compact and sturdy design fits neatly into workspaces or shelves. It blends well into home and office environments. Portability stays practical. Overall, the Beco GP1500 1500VA 900W UPS delivers strong battery backup, surge protection, and voltage regulation. It ensures steady power and protects electronics effectively. This UPS is ideal for users needing reliable, high-capacity power protection every day. Specifications: 1500VA, 900W, LED, Plastic Case Input: 140-290 VAC Output: 230VAC 50/60HZ 12V 9AH *2pcs, Universal Socket *4 + EU Plug With AVR, Bypass output Overload and short circuit protection
APC 800VA BX800LI 415W UPS (IEC Plug) APC 650VA BX650LI UPS
UPS battery 12V 7A Battery for UPS 7A 12v
Specifications : High Reliability Advanced DSP (Digital signal processors) technology Variable speed fan Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Advanced digital parallel technology High Availability Wide input voltage range, 50 / 60 Hz frequency auto sensing Linear derating in low voltage input reducing battery discharging times, extending the service life of battery Dual-input design, supporting independent bypass Output power factor improved from 0.9 to 1, load capacity increased by 13% Flexible battery configuration (settable 16 – 20 pcs batteries) Charging voltage and current configured by demands Ability to switch on the UPS with batteries Settable delayed start time when mains power is restored, reducing the impact on power grid or generator Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output High Usability LCD+LED display, multi-functional keys operation, friendly human-machine interface Powerful background software for parameters configuration and online updating Compact internal layout, miniaturized the complete unit for small footprint High Intelligence Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry contacts communication interfaces Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% Energy Conservation and Environment Protection Active power factor correction (APFC), input power factor up to 0.99 High efficiency 95% (up to 98% in ECO mode) Automatic power On/Off according to the load capacity set by users Equipped with self-aging function
PCE VX Online 1 KVA 800W Internal Batteries Double Conversion Online- Pure Sine Wave Model VX 1K Input Rating Voltage Frequency Voltage range Power Factor THDi 1000VA 220V, 230V, 240V, 1Ø 2Wires 40~70Hz 176-300 VAC at 100% load, 110-300 VAC at 50% load >99% <5% Ouput Active Power @ PF=0.9 Voltage (on battery) Frequency (on battery) Transfer Time Efficiency UPS Design Technology Output Wave Form Total Harmonic distortion (THD) Crest Factor 900W 220V, 230V, 240V, +/-1% (selectable output voltage), 1Ø 2Wires 50/60 Hz +/-0.2% 0 ms 93% Online double conversion design Pure Sinewave ≤3% (linear load), ≤5% (non linear load) 3:1 Protection Overload Protection Short Circuit Protection 110% for 10min, 130% for 1min, >130% for 3sec UPS output cuts off immediately using input fuse/circuit breaker protection System Display LCD indicators Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Alarm Battery mode Low battery Overload Fault Sounding every 4 second Sounding every second Sounding twice every second Continuously sounding Battery Battery Type Typical Recharge Time DC Voltage Charging Current Back up time(1/2 Load) 12V 9Ah 4 hours to 90% Full capacity 24VDC 1A 10~15 min depending on load Communication USB or RS-232 SNMP* Compatibility Interface with power management software Power Management from SNMP manager and web browser Supports Windows family, Linux, Unix and Mac Physical W x D x H mm Net Weight Kgs(lbs) 145x282x220mm 9.8Kg(21.6lb) Environment Operating Temperature Storage Temperature Altitude Audible noise Relative Humidity 0 – 40 °C / 32 ~ 104°F -20 ~ 50°C / -4 ~ 122°F 1,500 meters max <50dBA at 1 Meter 20 to 90% humidity (non-condensing) Standards & Certifications Performance Safety EMC (EMS / EMI) Design, production, & services Environment Marking & Certifications EN50091-3/IEC 62040-3 UL 1778, CE, EN 50091-1,EN 60950 (RD/), IEC 60950 IEC 61000-4-2/-3/-4/-5/-6/-8/-11, IEC 61000-3-2/-3,FCC Part 15, CISPR 22, EN 50091-2/IEC62040-2 Class A, EN 55022/B,FCC 47 part 15 – Subpart B – ISO 9001 ISO 14001 certified company CE, TUV/GS, UL, cUL, c-Tick
UPS ONLINE 3KVA 2400W 1 YEAR WARRANTY ABSOLUTELY PURE SINUSWELLE – With this inverter / inverter you operate your 220V devices via a 24V battery and a continuous power of 2400W 3KVA. Inverter is a device that allows you to use electrical devices everywhere, even when you are not at the power source MULTIFUNCTION HYBRID UNIT – Thanks to the small LCD display, it is also possible to charge the batteries with AC / solar charge controllers, setting the input voltage range and charging current. MODERN PROTECTION FEATURES – The device has many modern safety features such as: overload protection, overheating protection, short-circuit protection, so it is also suitable for home appliances, as well as microwaves, air conditioners, refrigerator, fan and daylight lamp. HIGH QUALITY MATERIALS – Equipped with PWM control, the inverter generates a pleasing amount of waste heat.
Professional II Series (1P/1P) PROLiNK Professional II Series (1P/1P) is a single-phase UPS system using microprocessor controlled true online double conversion technology and it can be used to provide protection for critical loads especially on IT applications. High input power factor correction in the system improves efficiency and reduces overall losses.
PCE EX Online 2 KVA 1800W is a double-conversion online UPS designed to deliver continuous and stable power protection for computers, servers, and sensitive electronic equipment. It ensures uninterrupted operation during outages and unstable voltage conditions. In addition, PCE EX Online 2 KVA 1800W uses true online double-conversion technology. Therefore, it provides zero transfer time between mains and battery mode. Moreover, it delivers a pure sine wave output for safe and stable power to connected devices. Furthermore, PCE EX Online 2 KVA 1800W supports a 2kVA / 1800W load capacity. As a result, it can handle multiple devices such as PCs, routers, and small servers. It also maintains stable voltage regulation for sensitive workloads. In addition, PCE EX Online 2 KVA 1800W includes advanced protection features. Therefore, it helps protect against overload, short circuits, and power fluctuations. Moreover, it is designed for consistent performance in professional and office environments. Overall, PCE EX Online 2 KVA 1800W delivers reliable, uninterrupted, and high-quality backup power for critical systems. Specifications: 2kVA / 1800W power capacity for multiple devices Online double-conversion UPS technology Zero transfer time for uninterrupted power Pure sine wave output for safe device operation Protection against overload and voltage fluctuations
