The Moxom MX-ST16 is a 12-in-1 safety power strip with 4 AC outlets, 7 USB-A ports, and 1 USB-C PD port. It supports up to 2500W / 10A total load and provides fast USB charging (PD 20W + QC 18W), making it a practical charging hub for home, office, and desk setups. ⚡ 12-in-1 Multi-Output Design: 4 AC sockets + 7 USB-A + 1 USB-C PD allow powering and charging many devices at once. 🔋 Fast USB Charging: USB-C PD up to 20W for modern phones and tablets. QC fast-charge up to 18W on supported USB-A ports. Smart IC balances output across ports for safe, efficient charging. 🔋 Fast USB Charging: USB-C PD up to 20W for modern phones and tablets. QC fast-charge up to 18W on supported USB-A ports. Smart IC balances output across ports for safe, efficient charging. 🛡️ Multi-Safety Protection: Overload protection, surge/over-voltage protection, over-current and overheating protection, plus foreign-object detection. 👶 Child-Safety Shutters: Safety doors on AC outlets reduce accidental contact. ⏻ One-Key Master Switch: Single button controls all outlets for easy power cut-off. 📏 Long Extension Cord: About 2 meters for flexible placement. 🧊 Heat-Resistant Build: ABS + PC construction designed for durability under continuous load.
PCE M8-700 UPS (line-interactive) — 700 VA / 360 W backup unit for 220–240 V input. Protects PCs, routers, small electronics from outages and voltage swings. The PCE M8-700 is a line-interactive UPS designed for home or small office use. It provides backup power, voltage regulation (AVR), surge protection, and supports automatic switching during outages. Ideal for desktop PCs, network gear, monitors, or point-of-sale systems. Features & Capabilities Line-interactive topology: regulates input voltage without switching to battery when voltage fluctuates mildly. Automatic Voltage Regulation (AVR) to correct undervolt/overvolt conditions. Simulated (stepped) sine wave output in battery mode. Surge, overload, short circuit, discharge protections built in. Cold start capability (ability to power on from battery with no mains) LED + audible alarms for status (battery mode, overload, fault) USB / RS232 interface in some variants for power management (shutdown, monitoring) Technical Specifications What “Input 220–240 VAC, 50/60 Hz, 3.7 A” Means (and Caveats) If the specification you’re giving is “3.7 A” at input, that corresponds to a maximum input current draw when the UPS is handling a heavy load or during charging cycles. At 230 V × 3.7 A ≈ 850 W of input capacity. The unit’s 360 W output means there’s overhead for losses, inverter inefficiency, battery charging, etc. The UPS must operate within the stated voltage and frequency ranges — if input is too low or too high, it may switch to battery or go into protection mode.
• Desk Stand LED / LCD / Plasma fits most 17″ to 30″ displays • Articulating stand with Rotation 360°, Swivel ±90° and Tilt angle +85° to 30° • Upright lift distance 10 ” (260mm) • Maximum extension 21 ” (535mm) • Supports load from 2 to 9 kg • Mounting VESA compliance 75×75, 100×100 mm 1 Year Warranty manufacturer link
AOC 24G2SPe IPS 165Hz The AOC 24G2SPe monitor elevates your gaming experience, offering immersive gameplay and superior visual performance. Equipped with advanced technology, it’s designed to meet the needs of gamers. Featuring a high refresh rate and quick response time, the 24G2SPe ensures smooth and tear-free gaming sessions, allowing you to stay ahead in the competition. The Full HD display with vivid colors and sharp details enhances your gaming visuals, making it the ideal choice for gamers seeking a competitive edge. The sleek and modern design of the AOC 24G2SPe blends seamlessly with your gaming setup, reflecting your commitment to excellence. Gamers and esports enthusiasts rely on this monitor to elevate their gaming performance, making it an essential component of their gaming rig. In summary, the monitor elevates your gaming with immersive experiences and superior visual performance. Don’t miss out on this gaming monitor that can enhance your gaming performance. Choose AOC 24G2SPe! IPS AdaptiveSync 165Hz 1ms 1920 × 1080 (FHD) HDMI
The ViewSonic VX24G10 24″ FHD 240Hz Gaming Monitor delivers ultra-smooth visuals ideal for gaming and daily use. It displays Full HD resolution with bright colors and crisp detail. The screen uses an IPS panel for wide viewing angles and accurate color. This makes movies, work, and games look clear and vivid. Moreover, the VX24G10 offers a blazing 240 Hz refresh rate. It reduces motion blur and makes fast movements appear fluid. This is especially helpful in competitive games or fast action scenes. The 1 ms response time ensures quick pixel transitions for sharp results. It helps avoid ghosting and lag during gameplay. In addition, the monitor includes modern connectivity options: multiple HDMI ports and DisplayPort. These ports let you connect PCs, laptops, and consoles easily. This flexibility supports many devices without trouble. The monitor also supports adaptive sync (FreeSync / G-Sync), which reduces screen tearing and ensures smooth frame rates. Furthermore, the ViewSonic VX24G10 features eye-friendly technology. Its flicker-free panel and blue-light filter help reduce eye strain during long sessions. The slim bezel design gives a modern look and saves desk space. The stand allows slight tilt adjustment for comfortable viewing angles. Also, the monitor supports HDR10, enhancing contrast and improving dynamic range for richer images. This adds depth to games, movies, and creative work. The combination of IPS quality, fast refresh, and HDR makes the VX24G10 a versatile choice for both gaming and productivity. Overall, the ViewSonic VX24G10 24″ FHD 240Hz Gaming Monitor offers smooth motion, sharp visuals, strong compatibility, and eye care. It is perfect for gamers, creators, and anyone who values performance and comfort. It enhances every task — from gaming to work to watching media. Specifications: Display : 24″ IPS Resolution : 1920×1080 Refresh Rate : 240Hz Response Time : 1ms
The MSI MAG 275QF 27″ 180Hz Gaming Monitor delivers an immersive experience for competitive and casual gamers. With its high refresh rate, it ensures smooth gameplay. This 27-inch gaming monitor features a Fast IPS panel with a 2560 x 1440 (QHD) resolution. The display offers sharp visuals and vibrant colors, enhancing gaming performance. The wide color gamut ensures lifelike images, making every scene more realistic. With a 180Hz refresh rate and 1ms response time, motion blur is minimized. This allows fast-paced action to remain clear and fluid. It gives gamers an advantage in competitive matches, reducing input lag. The MSI MAG 275QF 27″ 180Hz Gaming Monitor supports Adaptive Sync technology. This feature eliminates screen tearing and stuttering for a smooth experience. Whether playing FPS, racing, or RPG games, visuals stay sharp and fluid. It comes with multiple connectivity options, including DisplayPort and HDMI. This ensures compatibility with gaming PCs, consoles, and other devices. The ergonomic stand allows height, tilt, and swivel adjustments for better comfort. With Eye Care technology, the monitor reduces blue light and flicker. This helps minimize eye strain during long gaming sessions. Gamers can enjoy extended playtime without discomfort. The sleek and modern design of the MSI MAG 275QF 27″ 180Hz Gaming Monitor makes it a great addition to any setup. The ultra-thin bezels provide a more immersive viewing experience, perfect for multi-monitor setups. For gamers looking for speed, clarity, and smooth performance, this monitor is an excellent choice. It enhances both gameplay and overall visual experience. Specifications: Display : 27″ Rapid IPS Resolution : 2560×1440 (WQHD) Refresh Rate : 180Hz Response Rate : 0.5ms
A high-end pre-owned HP ZBook Fury G8 mobile workstation with 17.3" display, Intel Core i7-11850H, 64GB RAM, 512GB SSD+HDD 1TB, and NVIDIA RTX A2000 (T1200) 4GB—built for demanding engineering, design, and creative workflows.
Compact and stylish with a zinc alloy shell, the SatcOp 8‑in‑1 USB‑C Multiport Dock delivers essential ports—Ethernet, HDMI, USB, card readers, and charging—in one portable adapter. Ideal for powering your laptop while expanding connectivity on the go. 🖥️ HDMI Port – Connect to external displays in Full HD or 4K (depending on your host device). 🌐 RJ45 Ethernet Port – Provides stable wired internet access with gigabit-speed support. ⚡ USB-C PD Charging – Power your laptop while using other ports (up to 87W pass-through). 🔌 USB 3.0 & USB 2.0 Ports – Connect flash drives, external storage, keyboards, and mice. 💾 SD & TF Card Readers – Quick access to camera and device storage cards. 🧊 Material – Premium zinc alloy casing for durability and efficient heat dissipation. 💼 Design – Slim, lightweight, and perfect for travel, home, or office setups. 💻 Compatibility – Works with most USB-C laptops, including Windows, macOS, Chrome OS, and select Android tablets.
Features Stylish and compact Bluetooth speaker, easy to carry. Supports wireless connectivity via Bluetooth. True Wireless Stereo (TWS): Connect two speakers simultaneously. Durable ABS plastic material with a fabric-covered front panel. Built-in microphone for hands-free calls. LED indicator to display working status. Water-resistant with an IPX7 rating. Continuous playback for 8-12 hours (depending on volume). 5-watt speaker delivering Hi-Fi audio quality. On-speaker controls for music playback and volume adjustment. Built-in battery with Type-C charging port for easy recharging. Technical Specifications Bluetooth Version: V5.4 Transmission Distance: 10 meters Rated Power: 5W Driver Unit: 40mm Input: DC5V Battery Capacity: 1200mAh Charging Time: 2 hours Playback Time: 8-12 hours (depending on volume)
Genuine-spec keyboard replacement for MacBook Pro 13″ (Model A2251, 2020) — choose US QWERTY or UK QWERTY (with £ symbol). Features Apple’s reliable Magic Keyboard with scissor-switch mechanism, backlighting, and precise OEM fit. Compatible With: MacBook Pro 13-inch (2020, Two Thunderbolt Ports, Model A2251, Model Identifier MacBookPro16,1) with Intel Core i5/i7 processors. Layout Options (select at purchase): US Layout: Standard QWERTY with wide Enter key, @ above 2, # above 3, and full function row. UK Layout: QWERTY with £ symbol, tall vertical Enter key, @ accessed via right Alt, and UK-specific punctuation. US Layout: Standard QWERTY with wide Enter key, @ above 2, # above 3, and full function row. UK Layout: QWERTY with £ symbol, tall vertical Enter key, @ accessed via right Alt, and UK-specific punctuation. Keyboard Type: Apple’s Magic Keyboard with scissor-switch mechanism—offering improved durability, quieter typing, and 1mm key travel compared to Butterfly keyboards. Integrated Features: Full backlit keys for low-light environments Ambient light sensor support OEM-style flex cable pre-attached for direct connection to the logic board Full backlit keys for low-light environments Ambient light sensor support OEM-style flex cable pre-attached for direct connection to the logic board Precision Build: Engineered to match Apple’s exact dimensions, key spacing, and top-case curvature—ensures seamless visual and functional integration. Installation Note: The keyboard is factory-glued into the top case. Replacement requires full disassembly, careful adhesive removal, and professional re-adhesion. Recommended for experienced or certified repair technicians only.
The LG 32GN600-B 32″ Monitor delivers clear and smooth visuals for gaming and everyday use.It features a 32-inch QHD display with sharp details and vibrant colors. Moreover, its high refresh rate ensures fluid motion in fast-paced games and videos. This monitor uses a VA panel for strong contrast and wide viewing angles. Additionally, the fast response time reduces blur and ghosting during competitive gaming. The anti-glare screen helps minimize reflections in bright environments. HDMI and DisplayPort inputs allow easy connection to PCs, laptops, and gaming consoles. Furthermore, tilt adjustment helps you find a comfortable viewing angle for long sessions. Low blue light and flicker-free technologies reduce eye strain during extended use. This display is ideal for gamers, streamers, and home users alike. Therefore, it supports competitive gaming, media streaming, and productivity tasks. Finally, it combines sharp visuals, fast performance, and comfort features for daily use. Specifications: Screen Size: 32″ QHD VA panel Resolution: 2560 × 1440 Refresh Rate: High for smooth motion Ports: HDMI + DisplayPort Features: Anti-glare, low blue light, flicker-free eye care
Genuine-spec touchpad flex cable for MacBook Air 13.6″ (Model A2681, 2022, M2)—essential for restoring full Force Touch functionality, haptic feedback, and multi-touch gesture support when replacing or repairing the trackpad assembly. Compatible With: MacBook Air 13.6-inch (2022, Model A2681) with Apple M2 chip (all colors: Silver, Space Gray, Starlight, Midnight). Part Type: Touchpad flex cable only—does not include the trackpad, Taptic Engine, or mounting hardware. This is the ribbon cable assembly that connects the trackpad to the logic board. Function: Transmits touch input, Force Touch pressure data, and haptic feedback signals between the trackpad and logic board—critical for macOS gesture recognition and Taptic Engine operation. OEM-Quality Construction: Matches Apple’s original flex circuit in length, connector type, shielding, and bend radius—ensures reliable signal integrity and long-term durability. Common Use Cases: Replacing a torn, frayed, or damaged original flex cable Completing a trackpad replacement when the original cable was compromised Repairing unresponsive or erratic trackpad behavior caused by cable failure Replacing a torn, frayed, or damaged original flex cable Completing a trackpad replacement when the original cable was compromised Repairing unresponsive or erratic trackpad behavior caused by cable failure Installation Note: Requires full bottom case disassembly and careful routing under the battery and logic board. Connectors use ZIF (Zero Insertion Force) sockets—do not force. Recommended for experienced or certified technicians only.
The SAMSUNG 27A804UJN Monitor delivers sharp visuals with 4K UHD resolution and IPS technology. First, it provides accurate colors and wide viewing angles for work and entertainment. The monitor features a 27-inch display, 60Hz refresh rate, and 300 nits brightness. In addition, it includes HDMI and DisplayPort for easy connection to multiple devices. Moreover, the adjustable stand supports height and tilt for better comfort. Therefore, users can enjoy clear images, smooth performance, and a flexible setup for daily use. Specifications: 27″ UHD 3840 x 2160 resolution delivers sharp and detailed images IPS panel provides accurate colors and wide viewing angles 60Hz refresh rate ensures smooth performance for daily tasks HDMI and DisplayPort enable easy connection to multiple devices Height and tilt adjustment improves comfort and viewing position
The ViewSonic TD1630-3 16″ Touch Screen Monitor offers smooth touch control in a compact and modern design. It provides clear HD visuals for work and entertainment. The screen shows bright colors and sharp details. This makes browsing, drawing, and viewing content more enjoyable. Moreover, the ViewSonic TD1630-3 16″ Touch Screen Monitor supports 10-point multi-touch. You can tap, pinch, and swipe with fast response. The touch experience feels natural and smooth. This helps you work faster and more comfortably. In addition, the monitor includes HDMI and VGA connections. These ports make setup quick and simple. You can connect laptops, desktops, and other devices with ease. This gives you strong flexibility for daily use. Furthermore, the ViewSonic TD1630-3 16″ Touch Screen Monitor features a durable stand. You can tilt the screen for better viewing angles. This helps reduce strain during long use. The strong design keeps the monitor stable on your desk. Also, the monitor includes built-in speakers for easy audio playback. You can watch videos, join meetings, or listen to music without extra devices. This makes the monitor more convenient and practical. The compact size of the ViewSonic TD1630-3 16″ Touch Screen Monitor fits small desks and workspaces. It works well in homes, offices, shops, and reception areas. The clean design blends nicely with modern setups. This makes it suitable for many environments. Overall, the ViewSonic TD1630-3 16″ Touch Screen Monitor offers responsive touch control, clear visuals, and simple connectivity. It improves productivity and enhances entertainment. It is ideal for students, professionals, and businesses that need a reliable touch display. Specifications: Display : 16″ TN Resolution : 1366×768 Refresh Rate : 60Hz Response Time : 12ms
lenovo battery L16L2PB2 L16M2PB1 L16S2PB2 L16C2PB2 Laptop Notebook Battery for Lenovo 5000-15 2ICP6/55/90 Series 7.4V 30Wh 4050mAh About this item Condition: New Voltage: 7.4V Capacity: 30Wh/4050mAh Replace Part Number: L16M2PB1 L16L2PB2 L16M2PB2 L16S2PB1 L16L2PB3 L16C2PB1 L17L2PF1 L17M2PB7 L16C2PB2 L16L2PB1 L16M2PB3 2ICP6/55/90 Fit For: Lenovo 5000-15 Series Raise the battery life: 1: After receiving the battery, Please charge it fully, discharge it to around 10, and do it three times. 2: If you don’t use the battery for a long time, please charge and discharge it once a month
The ViewSonic VX2779A-HD-PRO 27″ FHD 240Hz Gaming Monitor delivers ultra-smooth visuals for fast games. It features a 27-inch IPS panel that offers wide viewing angles and rich color. Moreover, the high 240 Hz refresh rate helps motion look fluid and responsive in action titles. This gaming monitor supports Full HD 1920×1080 resolution for crisp images and clear details. Additionally, the 1 ms response time (MPRT) reduces blur and ghosting in fast scenes. Adaptive sync tech like AMD FreeSync and NVIDIA G-SYNC compatibility helps cut screen tearing and stutter. The ViewSonic VX2779A-HD-PRO also includes HDR10 support to boost contrast and color depth for games and videos. Furthermore, anti-glare coating and low blue light help reduce eye strain during long play sessions. Multiple ports make setup easy with two HDMI and one DisplayPort connection. This monitor works well for competitive gaming, esports, and general entertainment. Therefore, it suits both PC gamers and console players. Finally, it combines speed, quality visuals, and versatile connectivity for everyday gaming use. Specifications: 27″ IPS panel with 1920×1080 Full HD resolution 240 Hz refresh rate and 1 ms (MPRT) response time HDR10 support and wide 178° viewing angles Connectivity: 2× HDMI 1.4 + 1× DisplayPort 1.4 Eye-care features: anti-glare, low blue light, and flicker-free
The BenQ PD2706U 27″ 4K 60Hz Monitor is crafted for designers and content creators who demand color accuracy and clarity. Its 27-inch IPS panel delivers a 3840×2160 resolution, ensuring sharp visuals and detailed imagery. With 95% DCI-P3, 100% sRGB, and 100% Rec.709 color space coverage, this monitor offers vibrant and true-to-life colors. Factory calibration ensures Delta E ≤ 3, providing consistent color accuracy across projects. The PD2706U supports HDR10 and VESA DisplayHDR 400, enhancing dynamic range for more realistic images. Its anti-glare screen and 178° viewing angles ensure comfortable viewing in various lighting conditions. Connectivity is streamlined with a 90W USB-C port, HDMI 2.0, and DisplayPort 1.4, facilitating easy integration with multiple devices. The built-in KVM switch allows control of two systems using one keyboard and mouse setup. Ergonomic features include height adjustment, tilt, swivel, and pivot, enabling users to customize their viewing experience for comfort. The monitor’s sleek design complements modern workspaces. Additional features like Low Blue Light and Flicker-Free technology reduce eye strain during extended use. The included Hotkey Puck G2 provides quick access to frequently used settings. In summary, the BenQ PD2706U 27″ 4K 60Hz Monitor combines high-resolution display, accurate color reproduction, and user-friendly features, making it an excellent choice for creative professionals. Specifications: Display : 27″ IPS Resolution : 4K (3840×2160) Refresh Rate : 60Hz Response Time : 5ms Speaker : Integrated
Genuine-spec US layout keyboard replacement for MacBook Pro (Model A1398, Late 2011–Mid 2012)—featuring durable scissor-switch keys, backlighting, and OEM-fit design for reliable typing and straightforward installation. Compatible With: MacBook Pro 13″: Late 2011 (Model A1278, but labeled A1398 in some regions) – Model Identifier MacBookPro8,1 MacBook Pro 15″: Early 2011, Late 2011, and Mid 2012 – Model Identifiers MacBookPro8,2 (15″ early/late 2011) and MacBookPro9,1 (15″ mid 2012) *(Note: “A1398” is primarily associated with the 15″ unibody MacBook Pro with Retina display (Mid 2012), which was the first Retina MacBook Pro.)* This keyboard fits the non-Retina 15″ A1398 (Mid 2012) and compatible Late 2011 models. MacBook Pro 13″: Late 2011 (Model A1278, but labeled A1398 in some regions) – Model Identifier MacBookPro8,1 MacBook Pro 15″: Early 2011, Late 2011, and Mid 2012 – Model Identifiers MacBookPro8,2 (15″ early/late 2011) and MacBookPro9,1 (15″ mid 2012) *(Note: “A1398” is primarily associated with the 15″ unibody MacBook Pro with Retina display (Mid 2012), which was the first Retina MacBook Pro.)* This keyboard fits the non-Retina 15″ A1398 (Mid 2012) and compatible Late 2011 models. Layout: Standard US English (QWERTY) with full-size keys, inverted-T arrow keys, and dedicated function row (F1–F12). Keyboard Type: Traditional scissor-switch mechanism—robust, tactile, and serviceable (pre-Butterfly era). Integrated Features: Backlit keys (adjustable brightness via F5/F6) OEM ribbon cable with ZIF connector Matches original key spacing and actuation force Backlit keys (adjustable brightness via F5/F6) OEM ribbon cable with ZIF connector Matches original key spacing and actuation force Build & Fit: Precision-molded plastic frame with exact screw mounts and alignment pegs—ensures secure, rattle-free installation in the top case. Installation Note: Keyboard is secured with screws and minimal adhesive. Requires full top case access and battery disconnect. Recommended for intermediate to advanced users or technicians.
The Riotouch 65″ Interactive Panel is designed to transform educational and professional environments with its cutting-edge features and user-friendly interface. This interactive flat panel offers a seamless blend of performance, connectivity, and intuitive design, making it an ideal choice for classrooms and conference rooms. Featuring a 65-inch 4K UHD display (3840 x 2160 resolution), the panel delivers crisp visuals and vibrant colors. Its 4mm anti-glare tempered glass ensures clear visibility from any angle, reducing eye strain during prolonged use. The panel supports up to 40-point multi-touch and 20-point multi-writing capabilities, allowing multiple users to interact simultaneously. This feature fosters collaborative learning and dynamic presentations, enhancing engagement and productivity. Powered by a quad-core Cortex-A55 processor and equipped with 4GB RAM and 32GB storage, the Riotouch panel ensures smooth performance. Its dual operating system support (Android and Windows) provides versatility, accommodating various software applications and user preferences. Connectivity is robust, with multiple ports including HDMI, USB 3.0, USB-C, VGA, and RJ45, facilitating easy integration with other devices. Built-in Wi-Fi and Bluetooth capabilities enable wireless connections, promoting a clutter-free workspace. The panel comes with integrated 2x15W front-facing speakers, delivering clear audio for multimedia presentations. Additionally, it includes a built-in 13MP 4K camera and microphone, supporting high-quality video conferencing and remote collaboration. Designed with user convenience in mind, the Riotouch panel features intuitive front controls for power, volume, and input selection. Its slim aluminum frame and wall-mountable design ensure it fits seamlessly into any environment. In summary, the Riotouch 65″ Interactive Panel combines high-resolution display, multi-touch interactivity, and versatile connectivity, making it a comprehensive solution for modern collaborative spaces. Specifications: Display : 65″ 4K UHD Touch Memory : 4GB Storage : 32GB OS : Android 11
About this item Multifunctional: retro portable speaker, supports Bluetooth transmission, U disk, memory card, AUX (connect to MP3, MP4 player, smartphone, PC) to play music. It is easy to enjoy stereo sound for music lovers. Long battery life: the Bluetooth speaker has a built-in 1500 mAh battery, is rechargeable and environmentally friendly, and offers a battery life of 8 hours so that you can enjoy your favorite music and radio stations for a long time. CLEAR SOUND The radio speaker with a built-in powerful DSP chip and antenna ensures excellent reception, allowing you to experience clear sound. The transmitters can be easily selected to find your favorite FM channels. POWERFUL: This wireless speaker is compact, but with high power, the 5W speaker delivers powerful sound quality. Allows you to enjoy the rich and impressive sound and transform your room into an enchanting listening environment. RETRO DESIGN The small wireless FM radio speaker with charming and versatile design combines classic aesthetics and is a delightful addition to your sound collection. Perfect for living room, bedroom, party, etc.
