PCE M8-700 UPS (line-interactive) — 700 VA / 360 W backup unit for 220–240 V input. Protects PCs, routers, small electronics from outages and voltage swings. The PCE M8-700 is a line-interactive UPS designed for home or small office use. It provides backup power, voltage regulation (AVR), surge protection, and supports automatic switching during outages. Ideal for desktop PCs, network gear, monitors, or point-of-sale systems. Features & Capabilities Line-interactive topology: regulates input voltage without switching to battery when voltage fluctuates mildly. Automatic Voltage Regulation (AVR) to correct undervolt/overvolt conditions. Simulated (stepped) sine wave output in battery mode. Surge, overload, short circuit, discharge protections built in. Cold start capability (ability to power on from battery with no mains) LED + audible alarms for status (battery mode, overload, fault) USB / RS232 interface in some variants for power management (shutdown, monitoring) Technical Specifications What “Input 220–240 VAC, 50/60 Hz, 3.7 A” Means (and Caveats) If the specification you’re giving is “3.7 A” at input, that corresponds to a maximum input current draw when the UPS is handling a heavy load or during charging cycles. At 230 V × 3.7 A ≈ 850 W of input capacity. The unit’s 360 W output means there’s overhead for losses, inverter inefficiency, battery charging, etc. The UPS must operate within the stated voltage and frequency ranges — if input is too low or too high, it may switch to battery or go into protection mode.
The Darkflash INF34 A-RGB Cooling Fan is designed to keep your PC cool while adding a touch of style. Whether you’re gaming or working, this cooling fan ensures optimal airflow and stable performance. Featuring advanced airflow technology, the Darkflash INF34 efficiently dissipates heat from your system. This keeps your PC running smoothly, even during intense tasks or long gaming sessions. With its customizable A-RGB lighting, the Darkflash INF34 adds a vibrant, modern look to your PC build. You can easily adjust the lighting to match your setup, giving it a personalized touch. The Darkflash INF34 A-RGB Cooling Fan is not just about aesthetics. It operates quietly, reducing noise levels while maintaining high cooling efficiency. This ensures a distraction-free environment during use. Installing the Darkflash INF34 is quick and easy. It comes with a standard 120mm size that fits most PC cases, and the included mounting hardware makes setup simple for all users. This cooling fan is compatible with popular RGB software, allowing you to sync it with your motherboard for seamless control over lighting effects. This feature makes the Darkflash INF34 a versatile choice for custom PC builds. In conclusion, the Darkflash INF34 A-RGB Cooling Fan combines efficient cooling, customizable lighting, and quiet operation. Upgrade your PC’s cooling system with this fan and enjoy a powerful, stylish, and quiet computing experience. Specifications: Fan Speed : 800~2000±10%RPM Noise Level : 31.6dBA Air Flow : 50.43CFM Bearing Type : Hydro Bearing Fan Size : 120x120x28mm
The Synology Enterprise Series 3.5″ SAS HDD 16TB is a reliable and high-performance storage solution. It is perfect for data-intensive applications and enterprise environments. With its massive 8TB capacity, you can store vast amounts of data effortlessly. Firstly experience the robust performance of the Synology 3.5″ SAS HDD 16TB . It ensures fast data access and transfer speeds, making it ideal for demanding workloads. Whether you’re managing databases or virtual machines, this HDD delivers consistently. Furthermore designed for durability, the Synology 3.5″ SAS HDD 16TB is built to withstand heavy usage. It ensures data integrity and reliability, which is crucial for mission-critical applications. You can trust this HDD to keep your data safe. With its advanced error correction and end-to-end data protection, the Synology 3.5″ SAS HDD 16TB offers unparalleled data security. Your data remains intact and protected against potential corruption. Peace of mind comes standard with this HDD. The Synology 3.5″ SAS HDD 16TB is optimized for enterprise environments. Its high-performance capabilities make it a valuable addition to any data center. Seamless integration with Synology systems ensures smooth operation and easy management. In conclusion, the Synology Enterprise Series 3.5″ SAS HDD 16TB provides reliable, high-capacity, and secure storage solutions for your enterprise needs. Upgrade your storage infrastructure today and experience enhanced performance and reliability. Specifications: Capacity : 16TB Form Factor : 3.5″ Interface : SAS 12 Gb/s Rotational Speed : 7200 RPM
The MSI GeForce RTX 5070 Ti 16G VENTUS 3X OC Graphics Card offers exceptional performance for gamers and creators. Powered by NVIDIA’s Blackwell architecture, it delivers real-time ray tracing and AI-enhanced graphics. Firstly equipped with 16GB of GDDR7 memory and a 256-bit interface, this card ensures smooth gameplay at high resolutions. Its boost clock reaches up to 2482 MHz, providing the speed needed for demanding applications. Furthermore the VENTUS 3X cooling system features three TORX Fan 5.0 fans, enhancing airflow and maintaining optimal temperatures during intense gaming sessions. This design ensures quieter and more efficient cooling. Moreover measuring 303 x 121 x 49 mm and weighing 1.07 kg, the card fits well in various PC builds, including small form factor setups. Its sleek, neutral aesthetic allows it to integrate seamlessly into any system design. Also the RTX 5070 Ti supports DLSS 4 and Multi Frame Generation technologies, enhancing frame rates and visual clarity. These features provide a more immersive gaming experience with improved performance. For connectivity, the card offers three DisplayPort 2.1b outputs and one HDMI 2.1b port, supporting up to 4K at 480Hz or 8K at 120Hz with DSC. This ensures compatibility with the latest high-resolution monitors. Finally the MSI GeForce RTX 5070 Ti 16G VENTUS 3X OC requires a 750W power supply and consumes approximately 300W under load. Its 16-pin power connector ensures stable power delivery for optimal performance. Upgrade your system with the MSI GeForce RTX 5070 Ti 16G VENTUS 3X OC Graphics Card to experience cutting-edge graphics and performance. Specifications: PCI Express 5.0 Video Memory : 16GB Core Clocks (Boost) : 2482 CUDA Cores : 8960 Memory Speed : 28 Gbps Resolution : Digital Max Resolution 7680 x 4320
The MSI MAG Forge 120A Airflow ATX Mid Tower Computer Case is designed for gaming systems that require strong airflow, efficient cooling, and broad hardware compatibility. It combines a mesh front panel, tempered glass side panel, and multiple pre-installed RGB fans to support modern PC builds. The case supports ATX, Micro-ATX, and Mini-ITX motherboards. Therefore, it offers flexibility for a wide range of gaming and workstation configurations. In addition, it comes with six pre-installed 120mm Auto RGB fans to provide effective airflow immediately after installation. Moreover, the chassis supports graphics cards up to 330mm long and CPU coolers up to 160mm high. As a result, it accommodates many modern gaming components with ample clearance. It also supports up to a 240mm radiator on both the front and top for liquid cooling upgrades. The front I/O panel includes two USB 3.2 Gen 1 Type-A ports, audio and microphone jacks, an LED control button, and a reset button. Furthermore, the case features a magnetic top dust filter, a tempered glass side panel, and support for up to eight system fans to maximize cooling performance. Finally, the MSI MAG Forge 120A Airflow provides excellent airflow, extensive cooling support, and modern hardware compatibility for reliable gaming PC builds. Specifications: Form Factor : Mid Tower Case MBO Support : ATX, Micro ATX, Mini ITX I/O Ports : 2x USB 3.2 Type A, 1x Audio, 1x Mic, 1x LED On/Off Button, 1x Reset Button Drive Mount Support : 3x 2.5″, 2x 2.5″/3.5″ Expansion Slot : 7 PSU Support : ATX Pre-Installed Fans : 3x Front auto-RGB, 2x Top auto-RGB, 1x Rear auto-RGB
Brand LIAN LI Model PC-Q25B Details Type Mini-ITX Tower Color Black Case Material Aluminum With Power Supply No Motherboard Compatibility Mini-ITX Side Panel Window No Dust Filters Yes Expansion External 3.5″ Drive Bays No Internal 3.5″ Drive Bays 3.5″ Drive bay x 7 ( Hot swap x 5 ) Internal 2.5″ Drive Bays 2.5″ Drive bay x 3 (used 3.5″ bay) Hot-Swap Drive Bays 5 Expansion Slots 2 Cooling System 120mm Fans 1 x 120 mm top fan 140mm Fans 1 x 140 mm front fan Dimensions & Weight Max GPU Length 320 mm Max CPU Cooler Height 80 mm Dimensions (H x W x D) 14.41″ x 7.83″ x 11.02″ Weight 8.4 Additional Info Features Maximum Compatibility: VGA Card length: 320mm PSU length: 140mm CPU cooler height: 80mm 1 Year Warranty manufacturer link
The MSI PRO H610M-G DDR5 motherboard is designed for stable and efficient performance in entry-level and business PC builds. It uses the Intel H610 chipset with LGA 1700 socket support, which allows compatibility with Intel Core 14th, 13th, and 12th Gen processors. As a result, users can build reliable systems for daily computing and productivity. Moreover, the motherboard supports DDR5 memory up to 96GB. It delivers speeds up to 5600 MHz depending on configuration. In addition, it supports Intel XMP technology, which helps improve memory performance and stability. Furthermore, it features a PCIe 4.0 x16 slot for modern graphics cards. It also includes an M.2 slot that supports PCIe Gen3 x4 storage. Therefore, users can benefit from faster data access and improved system responsiveness. In addition, the motherboard includes multiple display outputs such as HDMI, DisplayPort, and VGA. This allows flexible connectivity for different monitors. It also provides USB 3.2 Gen 1 ports and Gigabit LAN for stable networking and connectivity. The Micro-ATX form factor makes it suitable for compact PC builds. It also includes Core Boost and Memory Boost technologies for better power delivery and signal stability. In conclusion, the MSI PRO H610M-G DDR5 motherboard offers essential features, modern compatibility, and reliable performance for budget and office PC builds. Specifications: Supports Intel Core 14th, 13th, and 12th Gen processors (LGA1700) 2x DDR5 slots up to 96GB, up to 5600MHz 1x PCIe 4.0 x16 slot for modern GPUs 1x M.2 PCIe Gen3 x4 slot plus 4x SATA ports HDMI, DisplayPort, VGA with USB 3.2 and Gigabit LAN
Introducing the Thermaltake S200 TG ARGB Snow Mid Tower Chassis, a stylish and functional case for your gaming or workstation setup. With its sleek white design and tempered glass panels, it’s sure to make a statement on your desk. One of the standout features of the S200 TG ARGB Snow is its advanced cooling capabilities. Equipped with ample fan and radiator support, as well as optimized airflow design, this case ensures your components stay cool under pressure. Moreover, customization is key with the S200 TG ARGB Snow. Take advantage of the addressable RGB lighting system to personalize your build and create stunning visual effects. With synchronized lighting via motherboard software, you can achieve the perfect look for your setup. Installation is a breeze thanks to the modular design and tool-less installation features. Easily swap out components and make upgrades without hassle. Plus, with ample cable management options, you can keep your build looking clean and organized. In terms of compatibility, the S200 TG ARGB Snow accommodates a wide range of hardware, including ATX, Micro-ATX, and Mini-ITX motherboards, as well as high-end graphics cards and large CPU coolers. In summary, the Thermaltake S200 TG ARGB Snow Mid Tower Chassis offers a winning combination of style, performance, and customization for your PC build. Whether you’re a gamer, content creator, or PC enthusiast, this case has everything you need to showcase your rig in style. Specifications: Case Type : Mid Tower Dimension : 460x210x395.3mm Panel : 3mm Tempered Glass Color : White Part Number : CA-1X2-00M6WN-00
