The Fantech XD7E Aria E is a dual-mode gaming mouse designed for wired and wireless use. It uses a PixArt 3311 optical gaming sensor with up to 12000 DPI for adjustable sensitivity in gaming and daily PC tasks. It supports both USB wired mode and 2.4GHz wireless mode. As a result, users can switch between stable wired input and wireless freedom depending on usage. In addition, it includes 6 programmable buttons for basic customization and shortcuts. The mouse uses a built-in rechargeable battery with efficient power management. Therefore, it supports extended wireless usage sessions and can be recharged via USB when needed. Meanwhile, polling rate reaches up to 1000Hz for responsive input. It is lightweight at around 59g. In addition, its ergonomic “egg-shaped” design improves grip comfort for long gaming sessions. Overall, the XD7E Aria E is a lightweight dual-mode gaming mouse focused on precision, portability, and stable performance. Specifications: Dual-mode: wired USB + 2.4GHz wireless PixArt 3311 sensor up to 12000 DPI 6 programmable buttons 59g lightweight ergonomic design 1000Hz polling rate Built-in rechargeable battery
General Topology Online double conversion Configuration Tower Part Number 9E1000I Rating (VA/Watts) 1000/800 Dimensions (H x W x D, mm) 356 x 228 x 144 Weight (kg) 9.5 Electrical Input Connection (1) IEC-320-C14 Input Voltage Range 176-300V without derating (up to 100-300V with derating) Nominal Voltage 208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Electrical Output Voltages 208V*/220V/230V/240V ±1% Voltage THD <2% for 100% linear load Outlets (4) IEC-320-C13 Overload Capacity 105%-130% : 60s, 130%-150% : 10s,>150% : ≥ 300ms Efficiency (Normal Mode) Up to 91% in Online mode Output Frequency 50/60 Hz autoselect Communications Communication Ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously) Communication Slot 1 slot for Network-M2, ModBus-MS or Relay-MS cards Power Management Software Intelligent Power Editions Environmental & Standards Audible Noise <37 dB @ typical load Operating Temperature 0 to 40°C Safety markings IEC/EN 62040-1 EMC Markings IEC/EN 62040 -2 Approvals CE, CB report (TUV) 2 Years Warranty manufacturer link
Cougar MX110 RGB Mid Tower PC Case is designed by Cougar for entry-level gaming and everyday PC builds. Cougar builds this case to balance airflow, RGB lighting, and system compatibility in a compact mid-tower design. Cougar equips the MX110 with 4 pre-installed fixed RGB fans to provide immediate cooling and lighting effects. Additionally, it supports up to 6 total 120mm fans for expanded airflow when needed. Cougar designs the case with a mesh front panel to improve air intake. Moreover, it includes a tempered glass side panel to display internal components and lighting clearly. Cougar supports ATX, Micro-ATX, and Mini-ITX motherboards for flexible build options. It also supports GPUs up to 305mm and CPU coolers up to 158mm in height. Cougar MX110 RGB Mid Tower PC Case delivers airflow, RGB lighting, and solid hardware support for budget and entry gaming systems. Specifications: 4 pre-installed fixed RGB 120mm fans for cooling and lighting Supports up to 6 total 120mm fan configurations Mesh front panel for improved airflow intake Tempered glass side panel for system visibility Supports ATX, Micro-ATX, and Mini-ITX motherboards
Brother LC3719XLBK : Brother has long been a reliable partner in the office to get printing and scanning jobs done. We supply generic and original replacement cartridges for your Brother printer. Moreover some of our customers insist on using the original OEM cartridges and drum units. Use our range of guaranteed generic replacement cartridges and drum units (Brother LC3719XL Black Generic Ink (LC3719XL-BK) ), therefore our slogan is to cut costs not corners. Toners Corporation (Pty) Ltd has been supplying Brother ink and Brother Laser toner cartridges since 1995. Specifications: A High Quality Compatible Generic Replacement Ink Cartridges. Buy All Four Colours and Save! Print Clear Vivid Images and Text. Easy to Install & Replace Long Lasting Money-Wise Printing Solution Compatible Brother Printers: MFCJ2330DW; MFCJ2730DW; MFCJ3530DW; MFCJ3930DW; Page Yield: 1500 pages @ 5% coverage Toner Corporation – Cutting Costs not Corners. 1 year warranty Manufacturer Link
The TP-Link 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router is a powerful solution for your internet needs. This router combines advanced 4G LTE technology with high-speed wireless capabilities. As a result, you can enjoy fast and reliable internet access in your home or office. With dual-band Wi-Fi, this router operates on both 2.4 GHz and 5 GHz frequencies. This feature helps you avoid interference and boosts connectivity for all your devices. Whether you are streaming movies or gaming online, you’ll experience smooth and stable performance. Setting up the TP-Link 4G+ Cat6 AC1200 Router is quick and straightforward. You can connect it to a 4G LTE network easily, providing instant internet access. The user-friendly interface makes it simple to configure settings and manage your network. Additionally, the built-in Gigabit ports enable you to connect wired devices for even faster speeds. This router also features advanced security protocols. With WPA/WPA2 encryption, your network remains safe from unauthorized access. Parental controls allow you to manage your children’s internet usage effectively. Thus, you can ensure a secure and controlled online environment. Moreover, the TP-Link 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router is designed with an elegant and compact design. It fits seamlessly into any room without taking up much space. The sleek look enhances your home or office decor while providing powerful connectivity. Upgrade your internet experience today with this reliable and high-performance router. Specifications: Interface : 1x 10/100/1000 Mbps LAN/WAN Port, 3x 10/100/1000 Mbps LAN Ports, 1x Nano SIM Card Slot Wi-Fi Speed : 2.4GHz 300Mbps , 5GHz 867Mbps
Features and performances x Outstanding efficiency and overload. x Perfect management and limitation of AC sources. x Power shaving of the consumption peaks. x Automatic allocation of the power available. x Active filtering of the load steps on the genset. x Automatic protection of the sources against overload. x Powerful multi-stage PFC charger. x Ultra-short transfer time (from 0 to 15ms max.). x Automatic and efficient stand-by. x Compatible with AC coupling. x Display, programming and data logging. x RS-232 communication for remote supervision. x iPS Dim. : 44.50x20x17.2( LxWxH cm ) , 17.50 x 7.87×6.8 ( LxWxH inch) x Carton box Dim.: 53.5×30.5×30.5 (LxWxH cm) , 21.65×11.8×12 (LxWxH inch) x Weight : 25Kg ( 55lbs ) Model iPS 3700-24 Inverter Nominal battery voltage 24V Input voltage range 19 – 34V Continuous power @ 25°C 2000W Power 30 min. @ 25°C 2800W Power 25 sec. @ 25°C 5.6kVA Maximum load Up to short-circuit Maximum asymmetric load Up to Continuous power Load detection (stand-by) 2 to 25 W Maximum efficiency 86 – 90% Consumption OFF/Stand-by/ON 3W / 9W / 70W Output voltage Sine wave 220Vac (+/- 2%) / 190-245Vac Dynamic behavior 5 ms (on load change 0 to 100%) Overload and short-circuit Automatic disconnection up to 10 times restart attempt Overheat protection Warning before shut – with automatic restart Battery charger 6 step adjustable : I-U-Uo-Equalize-Uo(low)-U(periodic) Charging current adjustable 0 – 45A Maximum input voltage 265Vac Input AC voltage range Adjustable threshold from 150 to 265Vac Battery control Absorption end By duration 2 / 0.25 – 10 h or by current – / 4 – 30A Absorption voltage** 28.8 / 19 – 34V Periodic absorption voltage** 19 – 34V Floating voltage** 27.2 / 19 – 34V Reduced floating voltage 19 – 34V Equalization** By number of cycles (1 – 100) or at set interval (52 weeks) Equalization end By duration 4 / 0.25 – 10 h or by current – / 4 – 30A Deep-discharge protection 21.6 / 19 – 34V Reduced floating time 0 – 32 days Periodic absorption time 0 – 10 hours General data iPS 3700-24 Auxiliary Output 2 independent Transistor short circuit protected outputs Auxiliary Input 2 Opto Coupler Programmable Input 10V Æ 60VDC Net Weight 25Kg ( 55lbs ) Weight with the cartoon box 26.2Kg (57.5lbs) 1 Year warranty
The Cougar Poseidon Vistek Pro ARGB Liquid Cooler delivers strong cooling for high-performance gaming systems. It is designed to keep temperatures low during heavy workloads. Performance stays stable and reliable. This improves overall system efficiency. Moreover, the Cougar Poseidon Vistek Pro ARGB Liquid Cooler features a modern ARGB lighting design. Bright colors enhance the look of any PC build. Lighting effects feel smooth and vibrant. Visual appeal improves instantly. In addition, the liquid cooler uses an efficient pump system. Heat transfers quickly away from the processor. Cooling response stays fast and balanced. As a result, system temperatures remain controlled. Furthermore, the Cougar Poseidon Vistek Pro ARGB Liquid Cooler includes high-quality radiator fans. Airflow moves smoothly through the radiator. Noise levels stay low during operation. Cooling remains quiet and effective. Also, the cooler supports many modern CPU sockets. Compatibility works across popular platforms. Installation feels simple and user-friendly. This helps both beginners and experienced builders. In addition, the Cougar Poseidon Vistek Pro ARGB Liquid Cooler offers durable tubing and solid materials. Long-term use stays reliable and safe. Build quality feels strong and premium. Confidence increases over time. Moreover, the cooler helps maintain stable performance during gaming sessions. CPUs run cooler under load. Frame rates stay consistent. Gaming feels smoother. Also, the compact design fits easily into most cases. Space management stays flexible. Clean builds become easier. Compatibility improves. Overall, the Cougar Poseidon Vistek Pro ARGB Liquid Cooler combines powerful cooling with stylish ARGB lighting. It delivers efficiency, quiet operation, and visual impact. This liquid cooler is perfect for gamers and PC builders who want reliable thermal control and modern design. Specifications: Large 3.95-inch IPS TFT LCD delivers full view, real-time readouts in crisp 720 x 720 resolution with 60Hz refresh rate. Visual data fully accessed from your desktop through control software. Make the visuals your own with JPG/PNG/GIF/MP4 format compatibility. Single-frame PWM fans ensure streamlined connectivity, precision-controlled cooling and vibrant RGB lighting. Right-angle contoured UTTERIGHT radiator fins expands surface area for superior thermal efficiency. Supports AMD AM5 and Intel LGA 1851 sockets.
Cougar UNIFACE RGB Mid-Tower Case is a performance-focused PC chassis designed for gaming and high-airflow desktop builds. It supports modern hardware layouts, large graphics cards, and advanced cooling configurations for powerful system setups. Additionally, the case combines efficient ventilation with integrated RGB lighting for visually clean gaming builds. Moreover, Cougar UNIFACE RGB Mid-Tower Case supports Mini-ITX, Micro-ATX, ATX, CEB, and E-ATX motherboards for flexible compatibility. It also supports graphics cards up to 400mm in length, allowing installation of high-end GPUs for gaming and workstation use. Therefore, users can build large performance systems with strong airflow support. The case includes three front ARGB fans and one rear ARGB fan pre-installed for immediate cooling performance. In addition, it supports up to nine cooling fans and multiple radiator sizes including 420mm front and 360mm top radiators. The mesh airflow layout helps maintain stable thermal performance during demanding workloads. Furthermore, Cougar UNIFACE RGB Mid-Tower Case features a tempered glass side panel for internal hardware visibility and RGB presentation. It also includes USB Type-C Gen 2 connectivity on the front I/O panel for modern peripheral support. The integrated fan hub supports RGB synchronization with compatible motherboards for unified lighting control. Cougar UNIFACE RGB Mid-Tower Case provides strong airflow, modern connectivity, and broad hardware compatibility for gaming and enthusiast PC builds. Specifications: Supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards Includes three front ARGB fans and one rear ARGB fan Supports up to 420mm front radiator installation Tempered glass side panel for hardware visibility USB Type-C Gen 2 front panel connectivity
