GIGABYTE Z790 D DDR4 (rev. 1.0) LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors L3 cache varies with CPU CPU Chipset Intel® Z790 Express Chipset Memory Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory Dual channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory modules (Please refer “Memory Support List” for more information.) Onboard Graphics Integrated Graphics Processor-Intel® HD Graphics support: 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz * Support for DisplayPort 1.2 version and HDCP 2.3 (Graphics specifications may vary depending on CPU support.) Audio Realtek® Audio CODEC High Definition Audio 2/4/5.1/7.1-channel * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. Support for S/PDIF Out LAN Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) Expansion Slots CPU: 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. Chipset: 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1_4) 2 x PCI Express x1 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_2, PCIEX1_3) Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4) Storage Interface CPU: 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) Chipset: 2 x M.2 connectors (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB, M2P_SB) 6 x SATA 6Gb/s connectors RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices USB Chipset: 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal USB header 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) Chipset+1 USB 2.0 Hub: 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) Internal I/O Connectors 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x 4-pin ATX 12V power connector 1 x CPU fan header Specifications: GIGABYTE Z790 D DDR4 (rev. 1.0) 1 year warranty
The Linksys 8-Port Managed Gigabit PoE+ Switch LGS310MPC delivers high-performance networking with Power over Ethernet support. First, it provides fast and reliable connections for multiple devices while powering PoE+ compatible devices through Ethernet cables. In addition, the switch includes advanced management features such as VLAN, QoS, and traffic monitoring. Users can optimize network performance, prioritize critical applications, and secure data across the network. Moreover, plug-and-play setup and compact design make installation simple and reliable. Finally, energy-efficient operation ensures stable performance for small business and office networks. Specifications: 8 Gigabit ports with PoE+ to power compatible devices Advanced management with VLAN, QoS, and traffic monitoring Optimize network performance and prioritize critical applications Easy plug-and-play setup with compact and durable design Energy-efficient operation for reliable small office networking
Canon GI-490 yellow ink bottle for PIXMA G Series printers delivers high-volume color printing with consistent output quality. It is designed for Canon MegaTank systems that require reliable refill performance. Additionally, Canon uses genuine dye-based yellow ink. This ink produces bright colors and smooth gradients, so it improves photo and document quality. Moreover, the bottle supports a high yield of up to 7000 pages. As a result, it reduces refill frequency and supports long-term printing efficiency. The bottle includes a spill-resistant design for clean refilling. Therefore, it helps users refill ink tanks easily and safely. In addition, the GI-490 works with selected Canon PIXMA G Series printers designed for GI-490 ink systems. It ensures stable performance and consistent color output. Canon GI-490 yellow ink bottle for PIXMA G Series printers provides dependable high-volume color printing for everyday use. Specifications: Yellow ink bottle for Canon PIXMA G Series MegaTank printers High yield up to 7000 pages per bottle Genuine Canon dye-based ink for bright color output Spill-resistant bottle design for easy refilling Compatible with selected Canon PIXMA G Series printers
Looking for the perfect speaker to bring your music to life? Meet the Monster Sparkle Bluetooth Speaker, your ultimate audio companion. With its sleek and modern design, it adds a touch of style to any space. Experience crystal-clear sound that fills the room, thanks to the advanced technology packed into this compact speaker. Whether you’re listening to your favorite tunes or streaming podcasts, every beat comes through with stunning clarity. Say goodbye to tangled wires and hello to wireless convenience. With Bluetooth connectivity, you can easily pair your devices and stream music from anywhere in the room. No more limitations – just seamless, uninterrupted listening pleasure. But the Monster Sparkle isn’t just about great sound – it’s also built to last. Constructed from durable materials, it’s designed to withstand the rigors of everyday use, whether you’re at home, in the office, or on the go. And with its long-lasting battery life, you can enjoy hours of music without having to worry about recharging. Whether you’re hosting a party or relaxing at home, the Monster Sparkle has you covered. But don’t just take our word for it – see why music lovers everywhere are raving about the Monster Sparkle Bluetooth Speaker. Elevate your audio experience and bring your music to life like never before. Get yours today! Specifications: Bluetooth solution: 5.3 Transmission range: 10 meters Sensitivity：95dB(1M/1V) Frequency response：40Hz-20kHz (-10dB) THD：0.8% (20W) SNR：85dB Speaker：5.25”(4Ω)/2”(8Ω) Output power：80W(Peak) Battery: 7.4V/4000mAh Charging voltage: 5V/2A Charging time: about 4H Play time: 3H(100% volume), 6H(50% volume) Product size：329*212*194mm Support: BT/TF/AUX /USB DISK/MIC/TWS/RGB Light TF card support: MP3/WMA/WAV/FLAC/APE TF card music playing order: play in order Product weight: about 2600g USB-C charging
NV2 Pcie 4.0 Nvme Ssd Form factor M.2 2280 Interface PCIe 4.0 x4 NVMe Capacities2 250GB Sequential read/write1 250GB – 3,000/1,300MB/s Endurance (Total bytes written) 250GB Storage temperature -40°C~85°C Operating temperature 0°C~70°C Dimensions 22mm x 80mm x 2.2mm Weight 7g (all capacities) Vibration operating 2.17G (7-800 Hz) Vibration non-operating 20G (20-1000Hz) MTBF 1,500,000 hours
Description : Direct Thermal Receipt Printer – Speed 200 MM / Second – 80 MM Paper Size – Head Life 100 KM – Lan + RJ11 Interface manufacturer link
BenQ RE6504A 65” 4K UHD Interactive Flat Panel is a large touchscreen display designed for classrooms, meeting rooms, and collaborative work environments. It combines a 4K IPS panel, multi-touch support, and an Android-based system for interactive use without needing a separate PC. It features a 65-inch IPS display with 3840 × 2160 (4K UHD) resolution. Therefore, it delivers sharp visuals and wide viewing angles for group collaboration. In addition, it supports up to 40-point infrared touch input, allowing multiple users to write or interact at the same time. Moreover, it uses Android 14 (EDLA certified in most regions) with built-in apps and Google services support. As a result, users can run whiteboard tools, presentations, and educational apps directly on the display. The panel runs at 450 nits brightness with a 1200:1 contrast ratio. Therefore, it stays readable in bright rooms while maintaining stable image quality. In addition, it uses 4K resolution at 60Hz for smooth visual output from connected devices. Furthermore, it includes connectivity such as HDMI, USB, USB-C with power delivery, LAN, and OPS slot support. As a result, it works with laptops, external PCs, and modular computing systems. It also includes built-in speakers (typically 2 × 20W depending on configuration). Therefore, it supports presentations and lessons without external audio equipment. Finally, the BenQ RE6504A delivers a responsive 4K interactive experience with strong connectivity, multi-touch control, and Android integration for education and business use. Specifications: Display: 65-inch IPS panel with 3840×2160 4K UHD resolution Touch: Up to 40-point infrared multi-touch support System: Android 14 (EDLA) with built-in apps and tools Brightness: 450 nits with 1200:1 contrast ratio Connectivity: HDMI, USB, USB-C, LAN, OPS slot support
Genuine-spec touchpad flex cable for MacBook Air 13″ (Model A1534, Early 2015)—essential for restoring full trackpad functionality, including precise cursor control and physical click response, during repair or replacement. Compatible With: MacBook Air 13-inch (Early 2015, Model A1534, Model Identifier MacBookAir7,2). Part Type: Touchpad flex cable only—does not include the trackpad housing, button mechanism, or mounting brackets. This is the ribbon cable that connects the trackpad to the logic board. Function: Carries input signals from the trackpad to the logic board—critical for cursor movement, tap-to-click, and primary/secondary physical click functionality. (Note: This model uses a physical click mechanism, not Force Touch—so no haptic feedback or pressure-sensing.) OEM-Quality Construction: Matches Apple’s original cable in length, connector type, and shielding—ensures reliable signal transmission and long-term durability. Common Use Cases: Replacing a torn, frayed, or damaged original flex cable Completing a trackpad replacement when the original cable is compromised Fixing erratic cursor movement, unresponsive trackpad, or loss of click function Replacing a torn, frayed, or damaged original flex cable Completing a trackpad replacement when the original cable is compromised Fixing erratic cursor movement, unresponsive trackpad, or loss of click function Installation Note: Requires bottom case removal and careful disconnect/reconnect of the ZIF (Zero Insertion Force) connector on the logic board. The cable routes under the battery—handle with care. Suitable for intermediate to advanced DIYers or technicians.
